Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
-
Note (3)
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Power as declared per ISO 14396
-
Note (2)
Optimized VHP Plus is standard for the 24.
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
Standard Capability
122 °F
109 °F
-
Emissions
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
U.S. EPA Tier 4 Final/EU Stage V
-
Note (4)
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
-
-
Engine Model
Cat C27
Cat 7.1
-
Displacement
1648 in³
427.8 in³
-
Number of Cylinders
12
6
-
Engine Power (ISO 14396)
-
196 HP
-
Derating Altitude
-
9842 ft
-
Engine RPM
-
2,200
-
High - Ambient Capability
-
122 °F
-
Maximum Torque - ISO 9249
-
616 lb/ft
-
Torque Rise - ISO 9294
-
40%
-
Engine Power AWD (ISO 14396)
-
196 HP
-
Machine Weight
Weight*
161695 lb
-
-
Weights
Operating Weight - Typically Equipped
165314 lb
38912 lb
-
Note
-
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.
-
Moldboard
Blade Width
24 ft
12 ft
-
Blade Height
40 in
24 in
-
Arc Radius
-
16.3 in
-
Cutting Edge Width
-
6 in
-
End Bit
-
6 in
-
Throat Clearance
-
4.4 in
-
Blade Range
Maximum Depth of Cut
21.7 in
28.1 in
-
Maximum Lift Above Ground
16.1 in
18.7 in
-
Circle Center Shift Left
-
29.6 in
-
Circle Center Shift Right
-
28.7 in
-
Maximum Shoulder Reach Left
-
74.3 in
-
Maximum Shoulder Reach Right
-
71.3 in
-
Moldboard Side Shift Left
-
25.6 in
-
Moldboard Side Shift Right
-
20.7 in
-
Blade Tip Range Backward
-
5
-
Blade Tip Range Forward
-
40
-
Weight
Weight (Stage V)*
-
38912 lb
-
Weight (Tier 4 Final)**
-
40488 lb
-
All-wheel Drive Weight (AWD) (Tier 4 Final)**
-
42119 lb
-
All-Wheel Drive Weight (AWD) (Stage V)*
-
40543 lb
-
Air Conditioning System
Note
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
