CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    24 Motor Grader
    View Product
    140 GC Motor Grader
    View Product Remove
    140/140 AWD Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 535 HP - -
    Bore 5.4 in 4.1 in 4.5 in
    Stroke 6 in 5.3 in 5.9 in
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. -
    Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Power as declared per ISO 14396 -
    Note (2) Optimized VHP Plus is standard for the 24. Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Standard Capability 122 °F 109 °F 109 °F
    Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - -
    Engine Model Cat C27 Cat 7.1 Cat® C9.3
    Displacement 1648 in³ 427.8 in³ 567.5 in³
    Number of Cylinders 12 6 6
    Engine Power (ISO 14396) - 196 HP -
    Derating Altitude - 9842 ft 10000 ft
    Engine RPM - 2,200 -
    High - Ambient Capability - 122 °F 122 °F
    Maximum Torque - ISO 9249 - 616 lb/ft -
    Torque Rise - ISO 9294 - 40% -
    Engine Power AWD (ISO 14396) - 196 HP -
    Net Power Range (Tier 4) - - 179 HP
    Speed at Rated Power - - 2,000 rpm
    Maximum Torque - VHP Plus - - 840 lb/ft
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 200 HP
    VHP Plus - Gear - Net Power - Forward 2nd - - 189 HP
    VHP Plus - Gear - Net Power - Forward 5th - - 215 HP
    VHP Plus - Gear - Net Power - Forward 3rd - - 200 HP
    VHP Plus - Gear - Net Power - Forward 8th - - 231 HP
    Torque Rise - - 38%
    VHP Plus - Gear - Net Power - Reverse 2nd - - 189 HP
    VHP Plus - Gear - Net Power - Forward 1st - - 179 HP
    VHP Plus - Gear - Net Power - Forward 6th - - 220 HP
    VHP Plus - Gear - Net Power - Reverse 1st - - 179 HP
    VHP Plus Range - Net - - 133-172 kW (179-231 hp)
    VHP Plus - Gear - Net Power - Forward 7th - - 225 HP
    VHP Plus Range - Net - Metric - - 133-172 kW (181-234 hp)
    VHP Plus - Gear - Net Power - Forward 4th - - 210 HP
    Base Power (1st Gear) - Net - Metric - - 181 HP
    High Ambient - Fan Speed - Standard - - 1,400 rpm
    High Ambient - Fan Speed - Maximum - - 1,550 rpm
    High Ambient - Fan Speed - Minimum - - 500 rpm

    Weights
    Operating Weight - Typically Equipped 165314 lb 38912 lb 42647 lb
    Note - * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. -
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb
    Operating Weight - Typically Equipped - Front Axle - - 12055 lb
    Operating Weight - Typically Equipped - Rear Axle - - 30592 lb
    Gross Vehicle Weight - Base - Front Axle - - 9343 lb
    Gross Vehicle Weight - Base - Rear Axle - - 28077 lb
    Gross Vehicle Weight - Maximum - Total - - 55144 lb
    Gross Vehicle Weight - Base - Total - - 37420 lb
    Operating Weight - Typically Equipped - Total - - 42647 lb

    Moldboard
    Blade Width 24 ft 12 ft 12 ft
    Blade Height 40 in 24 in -
    Arc Radius - 16.3 in 16.3 in
    Cutting Edge Width - 6 in 6 in
    End Bit - 6 in -
    Throat Clearance - 4.4 in 6.5 in
    Moldboard - Height - - 24 in
    Moldboard - Thickness - - 0.87 in
    Cutting Edge Thickness - - 0.6 in
    End Bit - Width - - 6 in
    End Bit - Thickness - - 0.6 in
    Blade Pull - Base GVW - - 25269 lb
    Blade Pull - Maximum GVW - - 34262 lb
    Blade Down Pressure - Base GVW - - 16038 lb
    Blade Down Pressure - Maximum GVW - - 29309 lb
    Moldboard - Blade Width - - 12 ft

    Blade Range
    Maximum Depth of Cut 21.7 in 28.1 in 28.1 in
    Maximum Lift Above Ground 16.1 in 18.7 in 18.9 in
    Circle Center Shift Left - 29.6 in -
    Circle Center Shift Right - 28.7 in -
    Maximum Shoulder Reach Left - 74.3 in -
    Maximum Shoulder Reach Right - 71.3 in -
    Moldboard Side Shift Left - 25.6 in -
    Moldboard Side Shift Right - 20.7 in -
    Blade Tip Range Backward - 5 -
    Blade Tip Range Forward - 40 -
    Circle Centershift - Right - - 28.7 in
    Circle Centershift - Left - - 27.4 in
    Moldboard Sideshift - Right - - 26 in
    Moldboard Sideshift - Left - - 20.1 in
    Maximum Blade Position Angle - - 90°
    Blade Tip Range - Forward - - 40°
    Blade Tip Range - Backward - - 5°
    Maximum Shoulder Reach Outside of Tires - Right - - 77.9 in
    Maximum Shoulder Reach Outside of Tires - Left - - 70.5 in

    Machine Weight
    Weight* 161695 lb - -

    Air Conditioning System
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. -

    Dimensions
    Width All Wheel Drive (AWD) - 99.3 in -
    Length of Machine* - 406.7 in -
    Maximum Height - 132.4 in -
    Width - 95.6 in -
    Note - *Typically equipped with push block and ripper. -
    Height - Top of Cab - - 130 in
    Length - Counterweight to Ripper - - 399 in
    Width - Outside Front Tires - - 98.9 in
    Length - Front Axle to Mid Tandem - - 241 in
    Length - Front Tire to Rear of Machine - - 351 in
    Length - Front Axle to Moldboard - - 100 in
    Length - Between Tandem Axles - - 60 in
    Width - Outside Rear Tires - - 98.9 in
    Width - Tire Center Lines - - 84.3 in
    Height - Front Axle Center - - 23.5 in
    Height - Exhaust Stack - - 128 in
    Height - Top of Cylinders - - 120 in
    Ground Clearance - Rear Axle - - 13.3 in

    Service Refill Capacities
    Fuel Tank - 78 gal (US) -
    Circle Drive with Slip Clutch - 2 gal (US) -
    Circle Drive without Slip Clutch - 0.5 gal (US) -
    Cooling System - 40 l -
    Engine Crankcase - 5.5 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 4.2 gal (US) -
    Hydraulic System - 11.9 gal (US) -
    Transmission - 4.8 gal (US) -

    Weight
    Weight (Tier 4 Final)** - 40488 lb -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** - 42119 lb -
    All-Wheel Drive Weight (AWD) (Stage V)* - 40543 lb -
    Weight (Stage V)* - 38912 lb -

    Operating Specifications
    Top Speed - Forward - - 29 mile/h
    Top Speed - Reverse - - 23 mile/h
    Turning Radius - Outside Front Tires - - 25.59 ft
    Steering Range - Left/Right - - 50°
    Articulation Angle - Left/Right - - 20°
    Forward - 1st - - 2.5 mile/h
    Forward - 2nd - - 3.4 mile/h
    Forward - 3rd - - 5 mile/h
    Forward - 4th - - 6.9 mile/h
    Forward - 5th - - 10.6 mile/h
    Forward - 6th - - 14.5 mile/h
    Forward - 7th - - 19.9 mile/h
    Forward - 8th - - 29 mile/h
    Reverse - 1st - - 2 mile/h
    Reverse - 2nd - - 3.7 mile/h
    Reverse - 3rd - - 5.4 mile/h
    Reverse - 4th - - 8.4 mile/h
    Reverse - 5th - - 15.7 mile/h
    Reverse - 6th - - 23 mile/h

    Service Refill
    Fuel Capacity - - 104 gal (US)
    Cooling System - - 15 gal (US)
    Hydraulic System - Total - - 26.4 gal (US)
    Hydraulic System - Tank - - 16.9 gal (US)
    Diesel Exhaust Fluid - - 5.8 gal (US)
    Transmission - Differential - Final Drives - - 18.5 gal (US)
    Engine Oil - - 7.9 gal (US)
    Tandem Housing - Each - - 20 gal (US)
    Front Wheel Spindle Bearing Housing - - 0.13 gal (US)
    Circle Drive Housing - - 1.8 gal (US)

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse
    Transmission - - APECS, Direct Drive, Powershift
    Brakes - Service - - Multiple Oil Disc
    Brakes - Service - Surface Area - - 3565 in²
    Brakes - Parking - - Multiple Oil Disc
    Brakes - Secondary - - Dual Circuit

    Hydraulic System
    Circuit Type - - Parallel
    Pump Type - - Variable Piston
    Pump Output - - 55.7 gal/min
    Maximum System Pressure - - 3500 psi
    Reservoir Tank Capacity - - 16.9 gal (US)
    Standby Pressure - - 885 psi

    Frame
    Drawbar - Width - - 3 in
    Circle - Diameter - - 60.2 in
    Circle - Blade Beam Thickness - - 1.6 in
    Drawbar - Height - - 6 in
    Front Frame Structure - Height - - 12.6 in
    Circle - Height - - 5.4 in
    Front Frame Structure - Width - - 12 in
    Drawbar - Thickness - - 0.5 in
    Front-Top/Bottom Plate - Width - - 12 in
    Front-Top/Bottom Plate - Thickness - - 0.87 in
    Front Axle - Height to Center - - 23.5 in
    Front Axle - Wheel Lean - Left/Right - - 18°
    Front Axle - Total Oscillation per Side - - 32°

    Ripper
    Ripping Depth - Maximum - - 16.8 in
    Ripper Shank Holder Spacing - - 21 in
    Ripper Shank Holders - - 5
    Penetration Force - - 20812 lb
    Pry-Out Force - - 27794 lb
    Machine Length Increase, Beam Raised - - 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in
    Mid, V-Type - Scarifier Shank Holders - - 11
    Rear - Scarifying Depth, Maximum - - 16.8 in
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in
    Front, V-Type - Working Width - - 47.4 in
    Mid, V-Type - Working Width - - 46.6 in
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 11-May
    Rear - Working Width - - 84 in
    Rear - Scarifier Shank Holders - - 9
    Rear - Scarifier Shank Holder Spacing - - 10.5 in

    Standards
    Brakes - - ISO 3450
    Sound - - ISO 6394; ISO 6395
    Steering - - ISO 5010
    ROPS/FOPS - - ISO 3471/ISO 3449

    Tandems
    Height - - 19.9 in
    Width - - 7.9 in
    Sidewall Thickness - Inner - - 0.63 in
    Sidewall Thickness - Outer - - 0.71 in
    Drive Chain Pitch - - 2 in
    Wheel Axle Spacing - - 60 in
    Tandem Oscillation - Front Up - - 15°
    Tandem Oscillation - Front Down - - 25°
    Add a Similar Product: