CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    24 Motor Grader
    View Product
    18 Motor Grader
    View Product Remove
    16 Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 535 HP - -
    Bore 5.4 in 5.1 in 5.1 in
    Stroke 6 in 6.2 in 6.2 in
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - -
    Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
    Note (2) Optimized VHP Plus is standard for the 24. - -
    Standard Capability 122 °F - -
    Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II - -
    Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - -
    Engine Model Cat C27 Cat® C13 Cat® C13
    Displacement 1648 in³ 763 in³ 763 in³
    Number of Cylinders 12 6 6
    Base Power (1st Gear) - Net - 304 HP 290 HP
    Speed at Rated Power - 2,000 rpm 2,000 rpm
    Standard - Ambient Capability - 122 °F 122 °F
    Base Power (1st Gear) - Net - Metric - 309 HP 294 HP
    VHP Range - Net - 227-266 kW (304-357 hp) 216-259 kW (290-348 hp)
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 1270 lb/ft 1270 lb/ft
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 12176 ft 12176 ft
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 12973 ft 12973 ft
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 1270 lb/ft 1270 lb/ft
    Standard - Fan Speed - Minimum - 550 rpm 550 rpm
    Emissions (1) - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 40% -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 1306 lb/ft -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4 Final) - 12500 ft -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 38% 39%
    Standard - Fan Speed - Maximum - 1,450 rpm 1,450 rpm
    Emissions (2) - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 38% 39%
    VHP Range - Net - Metric - 227-266 kW (309-362 hp) 216-259 kW (294-353 hp)
    Emissions (3) - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country
    Optimized VHP Range - Net - 227-266 kW (304-357 hp) 216-259 kW (290-348 hp)
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) - - 1306 lb/ft
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) - - 43%
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) - - 12500 ft

    Weights
    Operating Weight - Typically Equipped 165314 lb 74324 lb 71454 lb

    Moldboard
    Blade Width 24 ft 18 ft 16 ft
    Blade Height 40 in - -
    Arc Radius - 16.3 in 16.3 in
    Throat Clearance - 5 in 5 in
    Down Force - Maximum GVW - 43861 lb 43861 lb
    Blade Pull* - Base GVW - 47216 lb 41039 lb
    Blade Pull* - Maximum GVW - 52878 lb 52878 lb
    End Bit - Width - 6 in 6 in
    Down Force - Base GVW - 34008 lb 30743 lb
    Cutting Edge Thickness - 1.4 in 1 in
    Thickness - 1 in 1 in
    Width - 18 ft 16 ft
    Cutting Edge Width - 10 in 8 in
    End Bit - Thickness - 0.75 in 0.75 in
    Height - 31 in 31 in
    Note - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.

    Blade Range
    Maximum Depth of Cut 21.7 in 18.5 in 18.5 in
    Maximum Lift Above Ground 16.1 in 15.7 in 15.7 in
    Maximum Blade Position Angle - 65° 65°
    Maximum Shoulder Reach Outside of Tires - Right - 103 in 91 in
    Circle Centershift - Right - 22 in 22 in
    Maximum Shoulder Reach Outside of Tires - Left - 103 in 91 in
    Moldboard Sideshift - Right - 31.1 in 31.1 in
    Blade Tip Range - Backward - 5° 5°
    Moldboard Sideshift - Left - 29.1 in 29.1 in
    Circle Centershift - Left - 27.2 in 27.2 in
    Blade Tip Range - Forward - 40° 40°

    Machine Weight
    Weight* 161695 lb - -

    Service Refill
    Fuel Capacity - 131 gal (US) 131 gal (US)
    Cooling System - 18.5 gal (US) 18.5 gal (US)
    Hydraulic System - Tank - 18.5 gal (US) 18.5 gal (US)
    Hydraulic System - Total - 38.6 gal (US) 38.6 gal (US)
    DEF Tank - 4.2 gal (US) 4.2 gal (US)
    Engine Oil - 9.5 gal (US) 9.5 gal (US)
    Transmission - Differential - Final Drives - 26 gal (US) 34 gal (US)
    Tandem Housing - Each - 34 gal (US) 34 gal (US)
    Front Wheel Spindle Bearing Housing - 0.24 gal (US) 0.24 gal (US)
    Circle Drive Housing - 2.6 gal (US) 2.6 gal (US)

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse 8 Forward/6 Reverse
    Transmission - Direct drive, power shift, countershaft Direct drive, power shift, countershaft
    Brakes - Parking - Spring applied, hydraulically released Spring applied, hydraulically released
    Brakes - Dynamic Brake Torque per Wheel - 27069.27 lb/ft 27069.27 lb/ft
    Brakes - Service - Oil-actuated, oil disc Oil-actuated, oil disc
    Brakes - Secondary - Oil-actuated, oil-disc Oil-actuated, oil-disc

    Hydraulic System
    Circuit Type - Electro-hydraulic load sensing, closed center Electro-hydraulic load sensing, closed center
    Pump Type - Variable piston Variable piston
    Maximum System Pressure - 3590 psi 3590 psi
    Standby Pressure - 856 psi 856 psi
    Pump Output* - 74 gal/min 74 gal/min
    Note - *Pump output measured at 2,150 rpm. *Pump output measured at 2,150 rpm.

    Operating Specifications
    Forward - 6th - 16 mile/h 16 mile/h
    Forward - 2nd - 3.8 mile/h 3.8 mile/h
    Forward - 8th - 32.1 mile/h 32.1 mile/h
    Forward - 5th - 11.8 mile/h 11.8 mile/h
    Reverse - 3rd - 6 mile/h 6 mile/h
    Turning Radius - Outside Front Tires - 30.5 ft 30.5 ft
    Forward - 4th - 7.6 mile/h 7.6 mile/h
    Top Speed - Reverse - 25.3 mile/h 25.4 mile/h
    Forward - 7th - 22 mile/h 22 mile/h
    Articulation Angle - Left/Right - 20° 20°
    Reverse - 1st - 2.2 mile/h 2.2 mile/h
    Forward - 3rd - 5.5 mile/h 5.5 mile/h
    Reverse - 4th - 9.3 mile/h 9.3 mile/h
    Forward - 1st - 2.8 mile/h 2.8 mile/h
    Top Speed - Forward - 32.1 mile/h 32.1 mile/h
    Reverse - 6th - 25.3 mile/h 25.3 mile/h
    Steering Range - Left/Right - 47.5° 47.5°
    Reverse - 2nd - 4.1 mile/h 4.1 mile/h
    Reverse - 5th - 17.4 mile/h 17.4 mile/h
    Note - Calculated with no slip and 23.5R25 L-3 tires. Calculated with no slip and 23.5 R25 L-3 tires.

    Frame
    Front Frame Structure - Width - 14 in 14 in
    Front Axle - Height to Center - 26.4 in 26.4 in
    Circle - Diameter - 71.7 in 71.7 in
    Front Frame Structure - Thickness - 0.6 in 0.6 in
    Front Frame Structure - Height - 18.1 in 18.1 in
    Circle - Blade Beam Thickness - 2 in 2 in
    Drawbar - Width - 3 in 3 in
    Front Axle - Wheel Lean - 18° Left/17° Right 18° Left/17° Right
    Front Axle - Total Oscillation per Side - 35° 35°
    Drawbar - Height - 8 in 8 in

    Tandems
    Sidewall Thickness - Outer - 0.9 in 0.9 in
    Sidewall Thickness - Inner - 0.9 in 0.9 in
    Tandem Oscillation - Front Up - 15° 15°
    Tandem Oscillation - Front Down - 25° 25°
    Height - 25.5 in 25.5 in
    Width - 9.3 in 9.3 in
    Drive Chain Pitch - 2.5 in 2.5 in
    Wheel Axle Spacing - 72.5 in 72.5 in

    Ripper
    Shank Holder Spacing - Minimum - 17.5 in 17.5 in
    Ripping Depth - Maximum - 17.8 in 17.8 in
    Shank Holder Spacing - Maximum - 20 in 20 in
    Ripper Shank Holders - 7 7
    Penetration Force - 30311 lb 30311 lb
    Pry-Out Force - 43700 lb 43700 lb
    Machine Length Increase, Beam Raised - 63.4 in 63.4 in

    Weights Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 53830 lb -
    Gross Vehicle Weight - Base** - Total - 72298 lb -
    Gross Vehicle Weight - Maximum Tested - Rear Axle - 58753 lb -
    Gross Vehicle Weight - Maximum Tested - Front Axle - 26125 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 20494 lb -
    Gross Vehicle Weight - Base** - Front Axle - 19837 lb -
    Gross Vehicle Weight - Maximum Tested - Total - 84877 lb -
    Gross Vehicle Weight - Typically Equipped - Total - 74324 lb -
    Gross Vehicle Weight - Base** - Rear Axle - 52461 lb -
    Note (2) - **Base operating weight calculated on standard machine configuration with 23.5R25 tires, full fuel tank operator and rops cab. -
    Note (1) - *No Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission engine: subtract 150 kg (331 lb) from rear axle wt. & total wt. -

    Dimensions (Approximate)
    Height - Top of Cylinders - 122.6 in 121.6 in
    Width - Outside Rear Tires - 134.3 in 134.3 in
    Height - Exhaust Stack - 141.1 in 140 in
    Length - Between Tandem Axles - 72.5 in 72.5 in
    Length - Front Axle to Mid Tandem - 290 in 290 in
    Width - Tire Center Lines - 106.4 in 106.4 in
    Length - Front Axle to Moldboard - 120.7 in 120.7 in
    Length - Counterweight to Ripper - 474.4 in 474.4 in
    Height - Front Axle Center - 29.9 in 28.9 in
    Width - Outside Front Tires - 134.3 in 134.3 in
    Length - Front Tire to Rear of Machine - Including Tow Hitch - 417 in 417 in
    Height - Top of Cab - 147.5 in 146.4 in
    Ground Clearance - Rear Axle - 16.7 in 15.6 in

    Standards
    Sound - ISO 6394: 2008/ISO 6395: 2008/ISO 6396: 2008 ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
    ROPS/FOPS - ISO 3471: 2008/ISO 3449: 2005 ISO 3471:2008/ISO 3449:2005
    Brakes - ISO 3450: 2011 ISO 3450:2011
    Steering - ISO 5010: 2007 ISO 5010:2007
    Note (1) - - The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
    Note (2) - - The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Metric
    Gear - Forward 1st - 309 HP -
    Gear - Forward 2nd - 309 HP -
    Gear - Reverse 2nd - 309 HP -
    Gear - Forward 4th - 325 HP -
    Gear - Forward 6th - 341 HP -
    Gear - Forward 5th - 332 HP -
    Gear - Forward 8th - 362 HP -
    Gear - Reverse 1st - 309 HP -
    Gear - Forward 3rd - 315 HP -
    Gear - Forward 7th - 347 HP -
    Gear - Reverse 3rd-6th - 315 HP -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (2) - Tires: 23.5R25 Bridgestone VKT 1 Star Tires: 23.5R25 Bridgestone VKT 1 Star
    Wheel Group - 19.5×25 MP (1) - Tires: 23.5R25 Bridgestone VKT 2 Star Tires: 23.5R25 Bridgestone VKT 2 Star
    Wheel Group - 19.5×25 MP (3) - Tires: 23.5R25 Bridgestone VJT 1 Star Tires: 23.5R25 Bridgestone VJT 1 Star
    Wheel Group - 19.5×25 MP (4) - Tires: 23.5R25 Michelin XHA 2 Star Tires: 23.5R25 Michelin XHA 2 Star
    Wheel Group - 19.5×25 MP (5) - Tires: 23.5R25 Michelin XLDD 2 Star L5 Tires: 23.5R25 Michelin XLDD 2 Star L5

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent or Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards - Net
    Gear - Forward 4th - 321 HP -
    Gear - Reverse 2nd - 304 HP -
    Gear - Forward 1st - 304 HP -
    Gear - Reverse 3rd-6th - 311 HP -
    Gear - Forward 3rd - 311 HP -
    Gear - Forward 5th - 327 HP -
    Gear - Forward 7th - 342 HP -
    Gear - Forward 2nd - 304 HP -
    Gear - Reverse 1st - 304 HP -
    Gear - Forward 6th - 337 HP -
    Gear - Forward 8th - 357 HP -

    Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Total - - 84877 lb
    Gross Vehicle Weight - Base** - Total - - 63528 lb
    Gross Vehicle Weight - Typically Equipped - Rear Axle - - 52201 lb
    Gross Vehicle Weight - Typically Equipped - Total - - 71454 lb
    Gross Vehicle Weight - Maximum Tested - Front Axle - - 26125 lb
    Gross Vehicle Weight - Typically Equipped - Front Axle - - 19253 lb
    Gross Vehicle Weight - Maximum Tested - Rear Axle - - 58753 lb
    Gross Vehicle Weight - Base** - Front Axle - - 17932 lb
    Gross Vehicle Weight - Base** - Rear Axle - - 45596 lb
    Note (1) - - *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
    Note (2) - - **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
    Gear - Reverse 3rd-6th - - 298 HP
    Gear - Forward 8th - - 348 HP
    Gear - Forward 3rd - - 298 HP
    Gear - Forward 6th - - 320 HP
    Gear - Forward 5th - - 311 HP
    Gear - Reverse 1st - - 290 HP
    Gear - Reverse 2nd - - 290 HP
    Gear - Forward 4th - - 304 HP
    Gear - Forward 7th - - 328 HP
    Gear - Forward 1st - - 290 HP
    Gear - Forward 2nd - - 290 HP

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
    Gear - Forward 4th - - 309 HP
    Gear - Reverse 1st - - 294 HP
    Gear - Forward 3rd - - 302 HP
    Gear - Reverse 3rd-6th - - 302 HP
    Gear - Reverse 2nd - - 294 HP
    Gear - Forward 7th - - 332 HP
    Gear - Forward 6th - - 325 HP
    Gear - Forward 8th - - 353 HP
    Gear - Forward 1st - - 294 HP
    Gear - Forward 5th - - 315 HP
    Gear - Forward 2nd - - 294 HP
    Add a Similar Product: