CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    24 Motor Grader
    View Product
    150 Motor Grader
    View Product Remove
    120 - 2019 - N Am, Global
    View Product Remove
    140 Motor Grader LVR
    View Product Remove

    Engine
    Net Power - EEC 80/1269 535 HP - - 250 HP
    Bore 5.4 in 4.5 in 4.1 in 4.5 in
    Stroke 6 in 5.9 in 5.3 in 5.9 in
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." -
    Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - Power as declared per ISO 14396 -
    Note (2) Optimized VHP Plus is standard for the 24. - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Standard Capability 122 °F 109 °F 122 °F 109 °F
    Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V
    Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - - -
    Engine Model Cat C27 Cat® C9.3 Cat 7.1 Cat C9.3
    Displacement 1648 in³ 567.5 in³ 427.8 in³ 567.5 in³
    Number of Cylinders 12 6 6 6
    Net Power Range (Tier 4) - 200 HP - -
    Speed at Rated Power - 2,000 rpm - -
    Maximum Torque - VHP Plus - 920 lb/ft - -
    High Ambient - Fan Speed - Standard - 1,400 rpm - -
    VHP Plus Range - Net - Metric - 149-188 kW (202-255 hp) - -
    VHP Plus Range - Net - 149-188 kW (200-252 hp) - -
    Torque Rise - 39% - -
    VHP Plus - Gear - Net Power - Reverse 1st - 200 HP - -
    VHP Plus - Gear - Net Power - Forward 1st - 200 HP - -
    VHP Plus - Gear - Net Power - Forward 8th - 252 HP - -
    VHP Plus - Gear - Net Power - Forward 6th - 241 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd - 210 HP - -
    VHP Plus - Gear - Net Power - Forward 7th - 247 HP - -
    VHP Plus - Gear - Net Power - Forward 5th - 236 HP - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 220 HP - -
    VHP Plus - Gear - Net Power - Forward 4th - 231 HP - -
    Base Power (1st Gear) - Net - Metric - 202 HP - -
    VHP Plus - Gear - Net Power - Reverse 2nd - 210 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd - 220 HP - -
    Derating Altitude - 10000 ft 9842.5 ft -
    High Ambient - Fan Speed - Maximum - 1,550 rpm - -
    High Ambient - Fan Speed - Minimum - 500 rpm - -
    High - Ambient Capability - 122 °F - -
    Maximum Torque - ISO 9249 - - 606 lb/ft -
    All-Wheel Drive Net Power Range (Tier 3) - - 130 HP -
    Net Power Range (Tier 3) - - 130 HP -
    Engine RPM - - 2,000 2,000
    Maximum Torque - AWD On - - 611 lb/ft -
    Derating Altitude (AWD) - - 5499 ft -
    Torque Rise - ISO 9294 - - 42% 44%
    Net Power - ISO 9249/SAE J1349 - - - 250 HP

    Weights
    Operating Weight - Typically Equipped 165314 lb 43950 lb 35067 lb 20236 lb
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb - -
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb - -
    Operating Weight - Typically Equipped - Front Axle - 12549 lb - -
    Operating Weight - Typically Equipped - Rear Axle - 31401 lb - -
    Gross Vehicle Weight - Base - Front Axle - 9601 lb - -
    Gross Vehicle Weight - Base - Rear Axle - 28590 lb - -
    Gross Vehicle Weight - Maximum - Total - 55144 lb - -
    Operating Weight - Typically Equipped - Total - 43950 lb - -
    Gross Vehicle Weight - Base - Total - 38191 lb - -

    Moldboard
    Blade Width 24 ft 12 ft 12 ft 12 ft
    Blade Height 40 in - 24 in -
    Moldboard - Height - 24 in - -
    Moldboard - Thickness - 0.87 in - -
    Arc Radius - 16.3 in 16.3 in 16.3 in
    Throat Clearance - 6.5 in 4.1 in 6.5 in
    Cutting Edge Width - 6 in - -
    Cutting Edge Thickness - 0.6 in - -
    End Bit - Width - 6 in - -
    End Bit - Thickness - 0.6 in - -
    Blade Pull - Base GVW - 25732 lb - -
    Blade Pull - Maximum GVW - 34262 lb - -
    Blade Down Pressure - Base GVW - 16480 lb - -
    Blade Down Pressure - Maximum GVW - 29308 lb - -
    Moldboard - Blade Width - 12 ft - -
    End Bit - - 6 in 6 in
    Cutting Edge - - 6 in 6 in

    Blade Range
    Maximum Depth of Cut 21.7 in 28.1 in 30.5 in 28.9 in
    Maximum Lift Above Ground 16.1 in 18.9 in 16.1 in 18.9 in
    Circle Centershift - Right - 28.7 in - -
    Circle Centershift - Left - 27.4 in - -
    Moldboard Sideshift - Right - 26 in - -
    Moldboard Sideshift - Left - 20.1 in - -
    Maximum Blade Position Angle - 90° - -
    Blade Tip Range - Forward - 40° - -
    Blade Tip Range - Backward - 5° - -
    Maximum Shoulder Reach Outside of Tires - Right - 77.9 in - -
    Maximum Shoulder Reach Outside of Tires - Left - 70.5 in - -
    Blade Tip Range Forward - - 40 -
    Maximum Shoulder Reach Right - - 76 in -
    Moldboard Side Shift Right - - 26.1 in -
    Maximum Shoulder Reach Left - - 69.4 in -
    Moldboard Side Shift Left - - 20.1 in -
    Circle Center Shift Left - - 26 in -
    Blade Tip Range Backward - - 5 -
    Circle Center Shift Right - - 26 in -

    Machine Weight
    Weight* 161695 lb - - 42325 lb
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - 36731 lb -
    Note (1) - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. -
    Joystick Weight* Tier 4 - - 35358 lb -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - 36846 lb -
    Lever/Steering Wheel Weight* Tier 4 - - 35067 lb -
    Note - - - *Typically equipped with push block and ripper.
    All-Wheel Drive (AWD) Weight - - - 44613 lb

    Operating Specifications
    Top Speed - Forward - 29 mile/h - -
    Top Speed - Reverse - 23 mile/h - -
    Turning Radius - Outside Front Tires - 25.59 ft - -
    Steering Range - Left/Right - 50° - -
    Articulation Angle - Left/Right - 20° - -
    Forward - 1st - 2.5 mile/h - -
    Forward - 2nd - 3.4 mile/h - -
    Forward - 3rd - 5 mile/h - -
    Forward - 4th - 6.9 mile/h - -
    Forward - 5th - 10.6 mile/h - -
    Forward - 6th - 14.5 mile/h - -
    Forward - 7th - 19.9 mile/h - -
    Forward - 8th - 29 mile/h - -
    Reverse - 1st - 2 mile/h - -
    Reverse - 2nd - 3.7 mile/h - -
    Reverse - 3rd - 5.4 mile/h - -
    Reverse - 4th - 8.4 mile/h - -
    Reverse - 5th - 15.7 mile/h - -
    Reverse - 6th - 23 mile/h - -

    Service Refill
    Fuel Capacity - 104 gal (US) - -
    Cooling System - 15 gal (US) - -
    Hydraulic System - Total - 26.4 gal (US) - -
    Hydraulic System - Tank - 16.9 gal (US) - -
    Transmission - Differential - Final Drives - 18.5 gal (US) - -
    Diesel Exhaust Fluid - 5.8 gal (US) - -
    Engine Oil - 7.9 gal (US) - -
    Tandem Housing - Each - 20 gal (US) - -
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) - -
    Circle Drive Housing - 1.8 gal (US) - -
    Hydraulic System - - - 14.5 gal (US)
    Engine Crankcase - - - 7.9 gal (US)
    Circle Drive - - - 1.8 gal (US)
    Fuel Tank - - - 100 gal (US)
    Front Wheel Spindle Bearing - Each - - - 0.13 gal (US)

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse - -
    Transmission - APECS, Direct Drive, Powershift - -
    Brakes - Service - Multiple Oil Disc - -
    Brakes - Service - Surface Area - 3565 in² - -
    Brakes - Parking - Multiple Oil Disc - -
    Brakes - Secondary - Dual Circuit - -

    Hydraulic System
    Circuit Type - Parallel - -
    Pump Type - Variable Piston - -
    Pump Output - 55.7 gal/min - -
    Maximum System Pressure - 3500 psi - -
    Reservoir Tank Capacity - 16.9 gal (US) - -
    Standby Pressure - 885 psi - -

    Frame
    Drawbar - Width - 3 in - -
    Circle - Diameter - 60.2 in - -
    Circle - Blade Beam Thickness - 1.6 in - -
    Drawbar - Height - 6 in - -
    Front Frame Structure - Width - 12 in - -
    Front Frame Structure - Height - 12.6 in - -
    Circle - Height - 5.4 in - -
    Drawbar - Thickness - 0.5 in - -
    Front-Top/Bottom Plate - Width - 12 in - -
    Front-Top/Bottom Plate - Thickness - 0.87 in - -
    Front Axle - Height to Center - 23.5 in - -
    Front Axle - Wheel Lean - Left/Right - 18° - -
    Front Axle - Total Oscillation per Side - 32° - -

    Ripper
    Ripper Shank Holder Spacing - 21 in - -
    Ripping Depth - Maximum - 16.8 in - -
    Ripper Shank Holders - 5 - -
    Penetration Force - 20812 lb - -
    Pry-Out Force - 27794 lb - -
    Machine Length Increase, Beam Raised - 40.6 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 11-May - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in - -
    Rear - Scarifying Depth, Maximum - 16.8 in - -
    Mid, V-Type - Working Width - 46.6 in - -
    Front, V-Type - Working Width - 47.4 in - -
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in - -
    Mid, V-Type - Scarifier Shank Holders - 11 - -
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in - -
    Rear - Working Width - 84 in - -
    Rear - Scarifier Shank Holders - 9 - -
    Rear - Scarifier Shank Holder Spacing - 10.5 in - -

    Standards
    Steering - ISO 5010 - -
    ROPS/FOPS - ISO 3471/ISO 3449 - -
    Brakes - ISO 3450 - -
    Sound - ISO 6394; ISO 6395 - -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -
    Note - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. -

    Tandems
    Height - 19.9 in - -
    Width - 7.9 in - -
    Sidewall Thickness - Inner - 0.63 in - -
    Sidewall Thickness - Outer - 0.71 in - -
    Drive Chain Pitch - 2 in - -
    Wheel Axle Spacing - 60 in - -
    Tandem Oscillation - Front Up - 15° - -
    Tandem Oscillation - Front Down - 25° - -

    Dimensions
    Height - Top of Cab - 130 in - -
    Length - Counterweight to Ripper - 399 in - -
    Width - Outside Front Tires - 98.9 in - -
    Length - Front Axle to Mid Tandem - 241 in - -
    Length - Front Tire to Rear of Machine - 351 in - -
    Length - Front Axle to Moldboard - 100 in - -
    Length - Between Tandem Axles - 60 in - -
    Width - Outside Rear Tires - 98.9 in - -
    Width - Tire Center Lines - 84.3 in - -
    Height - Front Axle Center - 23.5 in - -
    Height - Exhaust Stack - 128 in - -
    Height - Top of Cylinders - 120 in - -
    Ground Clearance - Rear Axle - 13.3 in - -
    Maximum Height - - 136.4 in 132 in
    Length of Machine* - - 387 in 397.6 in
    Width All Wheel Drive (AWD) - - 2551 mm -
    Width - - 102 in 97.6 in
    Note - - *Typically equipped with push block and ripper. *Typically equipped with push block and ripper.
    Basic Blade Width - - 12 ft 140 in

    Service Refill Capacities
    Transmission and Differential - - 9 gal (US) -
    Circle Drive - - 1.8 gal (US) -
    Fuel Tank - - 65 gal (US) -
    Cooling System - - 14 gal (US) -
    Engine Crankcase - - 4.8 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 5 gal (US) -
    Hydraulic System - - 25.6 gal (US) -
    Add a Similar Product: