CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    24 Motor Grader
    View Product
    140 Motor Grader LVR
    View Product Remove
    120 - 2019 - N Am, Global
    View Product Remove
    150 Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 535 HP 250 HP - -
    Bore 5.4 in 4.5 in 4.1 in 4.5 in
    Stroke 6 in 5.9 in 5.3 in 5.9 in
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." -
    Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - Power as declared per ISO 14396 -
    Note (2) Optimized VHP Plus is standard for the 24. - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Standard Capability 122 °F 109 °F 122 °F 109 °F
    Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V
    Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - - -
    Engine Model Cat C27 Cat C9.3 Cat 7.1 Cat® C9.3
    Displacement 1648 in³ 567.5 in³ 427.8 in³ 567.5 in³
    Number of Cylinders 12 6 6 6
    Net Power - ISO 9249/SAE J1349 - 250 HP - -
    Engine RPM - 2,000 2,000 -
    Torque Rise - ISO 9294 - 44% 42% -
    Derating Altitude - - 9842.5 ft 10000 ft
    Maximum Torque - ISO 9249 - - 606 lb/ft -
    All-Wheel Drive Net Power Range (Tier 3) - - 130 HP -
    Net Power Range (Tier 3) - - 130 HP -
    Maximum Torque - AWD On - - 611 lb/ft -
    Derating Altitude (AWD) - - 5499 ft -
    Net Power Range (Tier 4) - - - 200 HP
    Speed at Rated Power - - - 2,000 rpm
    Maximum Torque - VHP Plus - - - 920 lb/ft
    High Ambient - Fan Speed - Standard - - - 1,400 rpm
    VHP Plus Range - Net - Metric - - - 149-188 kW (202-255 hp)
    VHP Plus Range - Net - - - 149-188 kW (200-252 hp)
    Torque Rise - - - 39%
    VHP Plus - Gear - Net Power - Reverse 1st - - - 200 HP
    VHP Plus - Gear - Net Power - Forward 1st - - - 200 HP
    VHP Plus - Gear - Net Power - Forward 8th - - - 252 HP
    VHP Plus - Gear - Net Power - Forward 6th - - - 241 HP
    VHP Plus - Gear - Net Power - Forward 2nd - - - 210 HP
    VHP Plus - Gear - Net Power - Forward 7th - - - 247 HP
    VHP Plus - Gear - Net Power - Forward 5th - - - 236 HP
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - - 220 HP
    VHP Plus - Gear - Net Power - Forward 4th - - - 231 HP
    Base Power (1st Gear) - Net - Metric - - - 202 HP
    VHP Plus - Gear - Net Power - Reverse 2nd - - - 210 HP
    VHP Plus - Gear - Net Power - Forward 3rd - - - 220 HP
    High Ambient - Fan Speed - Maximum - - - 1,550 rpm
    High Ambient - Fan Speed - Minimum - - - 500 rpm
    High - Ambient Capability - - - 122 °F

    Weights
    Operating Weight - Typically Equipped 165314 lb 20236 lb 35067 lb 43950 lb
    Gross Vehicle Weight - Maximum - Front Axle - - - 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle - - - 38069 lb
    Operating Weight - Typically Equipped - Front Axle - - - 12549 lb
    Operating Weight - Typically Equipped - Rear Axle - - - 31401 lb
    Gross Vehicle Weight - Base - Front Axle - - - 9601 lb
    Gross Vehicle Weight - Base - Rear Axle - - - 28590 lb
    Gross Vehicle Weight - Maximum - Total - - - 55144 lb
    Operating Weight - Typically Equipped - Total - - - 43950 lb
    Gross Vehicle Weight - Base - Total - - - 38191 lb

    Moldboard
    Blade Width 24 ft 12 ft 12 ft 12 ft
    Blade Height 40 in - 24 in -
    Cutting Edge - 6 in 6 in -
    Arc Radius - 16.3 in 16.3 in 16.3 in
    Throat Clearance - 6.5 in 4.1 in 6.5 in
    End Bit - 6 in 6 in -
    Moldboard - Height - - - 24 in
    Moldboard - Thickness - - - 0.87 in
    Cutting Edge Width - - - 6 in
    Cutting Edge Thickness - - - 0.6 in
    End Bit - Width - - - 6 in
    End Bit - Thickness - - - 0.6 in
    Blade Pull - Base GVW - - - 25732 lb
    Blade Pull - Maximum GVW - - - 34262 lb
    Blade Down Pressure - Base GVW - - - 16480 lb
    Blade Down Pressure - Maximum GVW - - - 29308 lb
    Moldboard - Blade Width - - - 12 ft

    Blade Range
    Maximum Depth of Cut 21.7 in 28.9 in 30.5 in 28.1 in
    Maximum Lift Above Ground 16.1 in 18.9 in 16.1 in 18.9 in
    Blade Tip Range Forward - - 40 -
    Maximum Shoulder Reach Right - - 76 in -
    Moldboard Side Shift Right - - 26.1 in -
    Maximum Shoulder Reach Left - - 69.4 in -
    Moldboard Side Shift Left - - 20.1 in -
    Circle Center Shift Left - - 26 in -
    Blade Tip Range Backward - - 5 -
    Circle Center Shift Right - - 26 in -
    Circle Centershift - Right - - - 28.7 in
    Circle Centershift - Left - - - 27.4 in
    Moldboard Sideshift - Right - - - 26 in
    Moldboard Sideshift - Left - - - 20.1 in
    Maximum Blade Position Angle - - - 90°
    Blade Tip Range - Forward - - - 40°
    Blade Tip Range - Backward - - - 5°
    Maximum Shoulder Reach Outside of Tires - Right - - - 77.9 in
    Maximum Shoulder Reach Outside of Tires - Left - - - 70.5 in

    Machine Weight
    Weight* 161695 lb 42325 lb - -
    Note - *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight - 44613 lb - -
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - 36731 lb -
    Note (1) - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. -
    Joystick Weight* Tier 4 - - 35358 lb -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - 36846 lb -
    Lever/Steering Wheel Weight* Tier 4 - - 35067 lb -

    Dimensions
    Basic Blade Width - 140 in 12 ft -
    Length of Machine* - 397.6 in 387 in -
    Width - 97.6 in 102 in -
    Note - *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. -
    Maximum Height - 132 in 136.4 in -
    Width All Wheel Drive (AWD) - - 2551 mm -
    Height - Top of Cab - - - 130 in
    Length - Counterweight to Ripper - - - 399 in
    Width - Outside Front Tires - - - 98.9 in
    Length - Front Axle to Mid Tandem - - - 241 in
    Length - Front Tire to Rear of Machine - - - 351 in
    Length - Front Axle to Moldboard - - - 100 in
    Length - Between Tandem Axles - - - 60 in
    Width - Outside Rear Tires - - - 98.9 in
    Width - Tire Center Lines - - - 84.3 in
    Height - Front Axle Center - - - 23.5 in
    Height - Exhaust Stack - - - 128 in
    Height - Top of Cylinders - - - 120 in
    Ground Clearance - Rear Axle - - - 13.3 in

    Service Refill
    Hydraulic System - 14.5 gal (US) - -
    Engine Crankcase - 7.9 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Fuel Tank - 100 gal (US) - -
    Front Wheel Spindle Bearing - Each - 0.13 gal (US) - -
    Fuel Capacity - - - 104 gal (US)
    Cooling System - - - 15 gal (US)
    Hydraulic System - Total - - - 26.4 gal (US)
    Hydraulic System - Tank - - - 16.9 gal (US)
    Transmission - Differential - Final Drives - - - 18.5 gal (US)
    Diesel Exhaust Fluid - - - 5.8 gal (US)
    Engine Oil - - - 7.9 gal (US)
    Tandem Housing - Each - - - 20 gal (US)
    Front Wheel Spindle Bearing Housing - - - 0.13 gal (US)
    Circle Drive Housing - - - 1.8 gal (US)

    Service Refill Capacities
    Transmission and Differential - - 9 gal (US) -
    Circle Drive - - 1.8 gal (US) -
    Fuel Tank - - 65 gal (US) -
    Cooling System - - 14 gal (US) -
    Engine Crankcase - - 4.8 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 5 gal (US) -
    Hydraulic System - - 25.6 gal (US) -

    Air Conditioning System
    Note - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. -
    Air Conditioning - - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operating Specifications
    Top Speed - Forward - - - 29 mile/h
    Top Speed - Reverse - - - 23 mile/h
    Turning Radius - Outside Front Tires - - - 25.59 ft
    Steering Range - Left/Right - - - 50°
    Articulation Angle - Left/Right - - - 20°
    Forward - 1st - - - 2.5 mile/h
    Forward - 2nd - - - 3.4 mile/h
    Forward - 3rd - - - 5 mile/h
    Forward - 4th - - - 6.9 mile/h
    Forward - 5th - - - 10.6 mile/h
    Forward - 6th - - - 14.5 mile/h
    Forward - 7th - - - 19.9 mile/h
    Forward - 8th - - - 29 mile/h
    Reverse - 1st - - - 2 mile/h
    Reverse - 2nd - - - 3.7 mile/h
    Reverse - 3rd - - - 5.4 mile/h
    Reverse - 4th - - - 8.4 mile/h
    Reverse - 5th - - - 15.7 mile/h
    Reverse - 6th - - - 23 mile/h

    Power Train
    Forward/Reverse Gears - - - 8 Forward/6 Reverse
    Transmission - - - APECS, Direct Drive, Powershift
    Brakes - Service - - - Multiple Oil Disc
    Brakes - Service - Surface Area - - - 3565 in²
    Brakes - Parking - - - Multiple Oil Disc
    Brakes - Secondary - - - Dual Circuit

    Hydraulic System
    Circuit Type - - - Parallel
    Pump Type - - - Variable Piston
    Pump Output - - - 55.7 gal/min
    Maximum System Pressure - - - 3500 psi
    Reservoir Tank Capacity - - - 16.9 gal (US)
    Standby Pressure - - - 885 psi

    Frame
    Drawbar - Width - - - 3 in
    Circle - Diameter - - - 60.2 in
    Circle - Blade Beam Thickness - - - 1.6 in
    Drawbar - Height - - - 6 in
    Front Frame Structure - Width - - - 12 in
    Front Frame Structure - Height - - - 12.6 in
    Circle - Height - - - 5.4 in
    Drawbar - Thickness - - - 0.5 in
    Front-Top/Bottom Plate - Width - - - 12 in
    Front-Top/Bottom Plate - Thickness - - - 0.87 in
    Front Axle - Height to Center - - - 23.5 in
    Front Axle - Wheel Lean - Left/Right - - - 18°
    Front Axle - Total Oscillation per Side - - - 32°

    Ripper
    Ripper Shank Holder Spacing - - - 21 in
    Ripping Depth - Maximum - - - 16.8 in
    Ripper Shank Holders - - - 5
    Penetration Force - - - 20812 lb
    Pry-Out Force - - - 27794 lb
    Machine Length Increase, Beam Raised - - - 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - - 11-May
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - - 18.4 in
    Rear - Scarifying Depth, Maximum - - - 16.8 in
    Mid, V-Type - Working Width - - - 46.6 in
    Front, V-Type - Working Width - - - 47.4 in
    Front, V-Type, 5 or 11 Tooth - Working Width - - - 40.6 in
    Mid, V-Type - Scarifying Depth, Maximum - - - 11.5 in
    Mid, V-Type - Scarifier Shank Holders - - - 11
    Mid, V-Type - Scarifier Shank Holder Spacing - - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - - 4.6 in
    Rear - Working Width - - - 84 in
    Rear - Scarifier Shank Holders - - - 9
    Rear - Scarifier Shank Holder Spacing - - - 10.5 in

    Standards
    Steering - - - ISO 5010
    ROPS/FOPS - - - ISO 3471/ISO 3449
    Brakes - - - ISO 3450
    Sound - - - ISO 6394; ISO 6395

    Tandems
    Height - - - 19.9 in
    Width - - - 7.9 in
    Sidewall Thickness - Inner - - - 0.63 in
    Sidewall Thickness - Outer - - - 0.71 in
    Drive Chain Pitch - - - 2 in
    Wheel Axle Spacing - - - 60 in
    Tandem Oscillation - Front Up - - - 15°
    Tandem Oscillation - Front Down - - - 25°
    Add a Similar Product: