CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    24 Motor Grader
    View Product
    120 - 2019 - N Am, Global
    View Product Remove
    140/140 AWD Motor Grader
    View Product Remove
    140 Motor Grader LVR
    View Product Remove

    Engine
    Net Power - EEC 80/1269 535 HP - - 250 HP
    Bore 5.4 in 4.1 in 4.5 in 4.5 in
    Stroke 6 in 5.3 in 5.9 in 5.9 in
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." - -
    Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Power as declared per ISO 14396 - -
    Note (2) Optimized VHP Plus is standard for the 24. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - -
    Standard Capability 122 °F 122 °F 109 °F 109 °F
    Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - - -
    Engine Model Cat C27 Cat 7.1 Cat® C9.3 Cat C9.3
    Displacement 1648 in³ 427.8 in³ 567.5 in³ 567.5 in³
    Number of Cylinders 12 6 6 6
    Derating Altitude - 9842.5 ft 10000 ft -
    Maximum Torque - ISO 9249 - 606 lb/ft - -
    All-Wheel Drive Net Power Range (Tier 3) - 130 HP - -
    Net Power Range (Tier 3) - 130 HP - -
    Engine RPM - 2,000 - 2,000
    Maximum Torque - AWD On - 611 lb/ft - -
    Derating Altitude (AWD) - 5499 ft - -
    Torque Rise - ISO 9294 - 42% - 44%
    Net Power Range (Tier 4) - - 179 HP -
    Speed at Rated Power - - 2,000 rpm -
    Maximum Torque - VHP Plus - - 840 lb/ft -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 200 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - - 189 HP -
    VHP Plus - Gear - Net Power - Forward 5th - - 215 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - - 200 HP -
    VHP Plus - Gear - Net Power - Forward 8th - - 231 HP -
    Torque Rise - - 38% -
    VHP Plus - Gear - Net Power - Reverse 2nd - - 189 HP -
    VHP Plus - Gear - Net Power - Forward 1st - - 179 HP -
    VHP Plus - Gear - Net Power - Forward 6th - - 220 HP -
    VHP Plus - Gear - Net Power - Reverse 1st - - 179 HP -
    VHP Plus Range - Net - - 133-172 kW (179-231 hp) -
    VHP Plus - Gear - Net Power - Forward 7th - - 225 HP -
    VHP Plus Range - Net - Metric - - 133-172 kW (181-234 hp) -
    VHP Plus - Gear - Net Power - Forward 4th - - 210 HP -
    Base Power (1st Gear) - Net - Metric - - 181 HP -
    High Ambient - Fan Speed - Standard - - 1,400 rpm -
    High Ambient - Fan Speed - Maximum - - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - - 500 rpm -
    High - Ambient Capability - - 122 °F -
    Net Power - ISO 9249/SAE J1349 - - - 250 HP

    Weights
    Operating Weight - Typically Equipped 165314 lb 35067 lb 42647 lb 20236 lb
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb -
    Operating Weight - Typically Equipped - Front Axle - - 12055 lb -
    Operating Weight - Typically Equipped - Rear Axle - - 30592 lb -
    Gross Vehicle Weight - Base - Front Axle - - 9343 lb -
    Gross Vehicle Weight - Base - Rear Axle - - 28077 lb -
    Gross Vehicle Weight - Maximum - Total - - 55144 lb -
    Gross Vehicle Weight - Base - Total - - 37420 lb -
    Operating Weight - Typically Equipped - Total - - 42647 lb -

    Moldboard
    Blade Width 24 ft 12 ft 12 ft 12 ft
    Blade Height 40 in 24 in - -
    Throat Clearance - 4.1 in 6.5 in 6.5 in
    End Bit - 6 in - 6 in
    Cutting Edge - 6 in - 6 in
    Arc Radius - 16.3 in 16.3 in 16.3 in
    Moldboard - Height - - 24 in -
    Moldboard - Thickness - - 0.87 in -
    Cutting Edge Width - - 6 in -
    Cutting Edge Thickness - - 0.6 in -
    End Bit - Width - - 6 in -
    End Bit - Thickness - - 0.6 in -
    Blade Pull - Base GVW - - 25269 lb -
    Blade Pull - Maximum GVW - - 34262 lb -
    Blade Down Pressure - Base GVW - - 16038 lb -
    Blade Down Pressure - Maximum GVW - - 29309 lb -
    Moldboard - Blade Width - - 12 ft -

    Blade Range
    Maximum Depth of Cut 21.7 in 30.5 in 28.1 in 28.9 in
    Maximum Lift Above Ground 16.1 in 16.1 in 18.9 in 18.9 in
    Blade Tip Range Forward - 40 - -
    Maximum Shoulder Reach Right - 76 in - -
    Moldboard Side Shift Right - 26.1 in - -
    Maximum Shoulder Reach Left - 69.4 in - -
    Moldboard Side Shift Left - 20.1 in - -
    Circle Center Shift Left - 26 in - -
    Blade Tip Range Backward - 5 - -
    Circle Center Shift Right - 26 in - -
    Circle Centershift - Right - - 28.7 in -
    Circle Centershift - Left - - 27.4 in -
    Moldboard Sideshift - Right - - 26 in -
    Moldboard Sideshift - Left - - 20.1 in -
    Maximum Blade Position Angle - - 90° -
    Blade Tip Range - Forward - - 40° -
    Blade Tip Range - Backward - - 5° -
    Maximum Shoulder Reach Outside of Tires - Right - - 77.9 in -
    Maximum Shoulder Reach Outside of Tires - Left - - 70.5 in -

    Machine Weight
    Weight* 161695 lb - - 42325 lb
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731 lb - -
    Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. - -
    Joystick Weight* Tier 4 - 35358 lb - -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846 lb - -
    Lever/Steering Wheel Weight* Tier 4 - 35067 lb - -
    Note - - - *Typically equipped with push block and ripper.
    All-Wheel Drive (AWD) Weight - - - 44613 lb

    Service Refill Capacities
    Transmission and Differential - 9 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Fuel Tank - 65 gal (US) - -
    Cooling System - 14 gal (US) - -
    Engine Crankcase - 4.8 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5 gal (US) - -
    Hydraulic System - 25.6 gal (US) - -

    Air Conditioning System
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. - -

    Dimensions
    Maximum Height - 136.4 in - 132 in
    Length of Machine* - 387 in - 397.6 in
    Width All Wheel Drive (AWD) - 2551 mm - -
    Width - 102 in - 97.6 in
    Note - *Typically equipped with push block and ripper. - *Typically equipped with push block and ripper.
    Basic Blade Width - 12 ft - 140 in
    Height - Top of Cab - - 130 in -
    Length - Counterweight to Ripper - - 399 in -
    Width - Outside Front Tires - - 98.9 in -
    Length - Front Axle to Mid Tandem - - 241 in -
    Length - Front Tire to Rear of Machine - - 351 in -
    Length - Front Axle to Moldboard - - 100 in -
    Length - Between Tandem Axles - - 60 in -
    Width - Outside Rear Tires - - 98.9 in -
    Width - Tire Center Lines - - 84.3 in -
    Height - Front Axle Center - - 23.5 in -
    Height - Exhaust Stack - - 128 in -
    Height - Top of Cylinders - - 120 in -
    Ground Clearance - Rear Axle - - 13.3 in -

    Operating Specifications
    Top Speed - Forward - - 29 mile/h -
    Top Speed - Reverse - - 23 mile/h -
    Turning Radius - Outside Front Tires - - 25.59 ft -
    Steering Range - Left/Right - - 50° -
    Articulation Angle - Left/Right - - 20° -
    Forward - 1st - - 2.5 mile/h -
    Forward - 2nd - - 3.4 mile/h -
    Forward - 3rd - - 5 mile/h -
    Forward - 4th - - 6.9 mile/h -
    Forward - 5th - - 10.6 mile/h -
    Forward - 6th - - 14.5 mile/h -
    Forward - 7th - - 19.9 mile/h -
    Forward - 8th - - 29 mile/h -
    Reverse - 1st - - 2 mile/h -
    Reverse - 2nd - - 3.7 mile/h -
    Reverse - 3rd - - 5.4 mile/h -
    Reverse - 4th - - 8.4 mile/h -
    Reverse - 5th - - 15.7 mile/h -
    Reverse - 6th - - 23 mile/h -

    Service Refill
    Fuel Capacity - - 104 gal (US) -
    Cooling System - - 15 gal (US) -
    Hydraulic System - Total - - 26.4 gal (US) -
    Hydraulic System - Tank - - 16.9 gal (US) -
    Diesel Exhaust Fluid - - 5.8 gal (US) -
    Transmission - Differential - Final Drives - - 18.5 gal (US) -
    Engine Oil - - 7.9 gal (US) -
    Tandem Housing - Each - - 20 gal (US) -
    Front Wheel Spindle Bearing Housing - - 0.13 gal (US) -
    Circle Drive Housing - - 1.8 gal (US) -
    Hydraulic System - - - 14.5 gal (US)
    Engine Crankcase - - - 7.9 gal (US)
    Circle Drive - - - 1.8 gal (US)
    Fuel Tank - - - 100 gal (US)
    Front Wheel Spindle Bearing - Each - - - 0.13 gal (US)

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse -
    Transmission - - APECS, Direct Drive, Powershift -
    Brakes - Service - - Multiple Oil Disc -
    Brakes - Service - Surface Area - - 3565 in² -
    Brakes - Parking - - Multiple Oil Disc -
    Brakes - Secondary - - Dual Circuit -

    Hydraulic System
    Circuit Type - - Parallel -
    Pump Type - - Variable Piston -
    Pump Output - - 55.7 gal/min -
    Maximum System Pressure - - 3500 psi -
    Reservoir Tank Capacity - - 16.9 gal (US) -
    Standby Pressure - - 885 psi -

    Frame
    Drawbar - Width - - 3 in -
    Circle - Diameter - - 60.2 in -
    Circle - Blade Beam Thickness - - 1.6 in -
    Drawbar - Height - - 6 in -
    Front Frame Structure - Height - - 12.6 in -
    Circle - Height - - 5.4 in -
    Front Frame Structure - Width - - 12 in -
    Drawbar - Thickness - - 0.5 in -
    Front-Top/Bottom Plate - Width - - 12 in -
    Front-Top/Bottom Plate - Thickness - - 0.87 in -
    Front Axle - Height to Center - - 23.5 in -
    Front Axle - Wheel Lean - Left/Right - - 18° -
    Front Axle - Total Oscillation per Side - - 32° -

    Ripper
    Ripping Depth - Maximum - - 16.8 in -
    Ripper Shank Holder Spacing - - 21 in -
    Ripper Shank Holders - - 5 -
    Penetration Force - - 20812 lb -
    Pry-Out Force - - 27794 lb -
    Machine Length Increase, Beam Raised - - 40.6 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in -
    Mid, V-Type - Scarifier Shank Holders - - 11 -
    Rear - Scarifying Depth, Maximum - - 16.8 in -
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in -
    Front, V-Type - Working Width - - 47.4 in -
    Mid, V-Type - Working Width - - 46.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in -
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 11-May -
    Rear - Working Width - - 84 in -
    Rear - Scarifier Shank Holders - - 9 -
    Rear - Scarifier Shank Holder Spacing - - 10.5 in -

    Standards
    Brakes - - ISO 3450 -
    Sound - - ISO 6394; ISO 6395 -
    Steering - - ISO 5010 -
    ROPS/FOPS - - ISO 3471/ISO 3449 -

    Tandems
    Height - - 19.9 in -
    Width - - 7.9 in -
    Sidewall Thickness - Inner - - 0.63 in -
    Sidewall Thickness - Outer - - 0.71 in -
    Drive Chain Pitch - - 2 in -
    Wheel Axle Spacing - - 60 in -
    Tandem Oscillation - Front Up - - 15° -
    Tandem Oscillation - Front Down - - 25° -
    Add a Similar Product: