CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    16 Motor Grader
    View Product
    120 - 2019 - N Am, Global
    View Product Remove
    160 Motor Grader
    View Product Remove
    24 Motor Grader
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 290 HP - 221 HP -
    Engine Model Cat® C13 Cat 7.1 Cat® C9.3 Cat C27
    Bore 5.1 in 4.1 in 4.5 in 5.4 in
    Stroke 6.2 in 5.3 in 5.9 in 6 in
    Speed at Rated Power 2,000 rpm - 2,000 rpm -
    Optimized VHP Range - Net 216-259 kW (290-348 hp) - - -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 12176 ft - - -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 1270 lb/ft - - -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) 1306 lb/ft - - -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 1270 lb/ft - - -
    Emissions (2) Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country - - -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) 43% - - -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent 39% - - -
    Standard - Ambient Capability 122 °F - - -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 12973 ft - - -
    VHP Range - Net - Metric 216-259 kW (294-353 hp) - - -
    Base Power (1st Gear) - Net - Metric 294 HP - 224 HP -
    Standard - Fan Speed - Minimum 550 rpm - - -
    Standard - Fan Speed - Maximum 1,450 rpm - - -
    Emissions (3) Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country - - -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent 39% - - -
    Emissions (1) U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) - - -
    VHP Range - Net 216-259 kW (290-348 hp) - - -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) 12500 ft - - -
    Displacement 763 in³ 427.8 in³ 567.5 in³ 1648 in³
    Number of Cylinders 6 6 6 12
    Note (2) - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - Optimized VHP Plus is standard for the 24.
    Derating Altitude - 9842.5 ft 10000 ft -
    Maximum Torque - ISO 9249 - 606 lb/ft - -
    All-Wheel Drive Net Power Range (Tier 3) - 130 HP - -
    Net Power Range (Tier 3) - 130 HP - -
    Note (3) - Power as declared per ISO 14396 - Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Engine RPM - 2,000 - -
    Maximum Torque - AWD On - 611 lb/ft - -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Emissions - U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
    Standard Capability - 122 °F 109 °F 122 °F
    Derating Altitude (AWD) - 5499 ft - -
    Torque Rise - ISO 9294 - 42% - -
    VHP Plus - Gear - Net Power - Forward 1st - - 221 HP -
    Torque Rise - - 39% -
    VHP Plus - Gear - Net Power - Forward 8th - - 272 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - - 241 HP -
    VHP Plus - Gear - Net Power - Forward 4th - - 252 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - - 231 HP -
    VHP Plus - Gear - Net Power - Forward 6th - - 262 HP -
    Maximum Torque - VHP Plus - - 1000 lb/ft -
    VHP Plus Range - Net - - 165-203 kW (221-272 hp) -
    VHP Plus - Gear - Net Power - Forward 7th - - 267 HP -
    VHP Plus - Gear - Net Power - Reverse 1st - - 221 HP -
    High Ambient - Fan Speed - Standard - - 1,400 rpm -
    VHP Plus - Gear - Net Power - Forward 5th - - 257 HP -
    VHP Plus - Gear - Net Power - Reverse 2nd - - 231 HP -
    VHP Plus Range - Net - Metric - - 165-203 kW (224-276 hp) -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 241 HP -
    High Ambient - Fan Speed - Maximum - - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - - 500 rpm -
    High - Ambient Capability - - 122 °F -
    Net Power - EEC 80/1269 - - - 535 HP
    Note (4) - - - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)

    Weights
    Operating Weight - Typically Equipped 71454 lb 35067 lb 45547 lb 165314 lb
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb -
    Gross Vehicle Weight - Base - Front Axle - - 9907 lb -
    Gross Vehicle Weight - Base - Rear Axle - - 28812 lb -
    Gross Vehicle Weight - Maximum - Total - - 55144 lb -
    Operating Weight - Typically Equipped - Front Axle - - 13237 lb -
    Gross Vehicle Weight - Base - Total - - 38719 lb -
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb -
    Operating Weight - Typically Equipped - Total - - 45547 lb -
    Operating Weight - Typically Equipped - Rear Axle - - 32310 lb -

    Moldboard
    Blade Width 16 ft 12 ft 14 ft 24 ft
    Arc Radius 16.3 in 16.3 in 16.3 in -
    Throat Clearance 5 in 4.1 in 6.5 in -
    Note *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. - - -
    Thickness 1 in - - -
    End Bit - Width 6 in - 6 in -
    Blade Pull* - Base GVW 41039 lb - - -
    Cutting Edge Width 8 in - 6 in -
    Cutting Edge Thickness 1 in - 0.6 in -
    Down Force - Maximum GVW 43861 lb - - -
    Height 31 in - - -
    Width 16 ft - - -
    Down Force - Base GVW 30743 lb - - -
    Blade Pull* - Maximum GVW 52878 lb - - -
    End Bit - Thickness 0.75 in - 0.6 in -
    Blade Height - 24 in - 40 in
    End Bit - 6 in - -
    Cutting Edge - 6 in - -
    Moldboard - Height - - 24 in -
    Moldboard - Thickness - - 0.87 in -
    Blade Pull - Base GVW - - 25931 lb -
    Blade Pull - Maximum GVW - - 34262 lb -
    Blade Down Pressure - Base GVW - - 17004 lb -
    Blade Down Pressure - Maximum GVW - - 29308 lb -
    Moldboard - Blade Width - - 14 ft -

    Service Refill
    Fuel Capacity 131 gal (US) - 104 gal (US) -
    Cooling System 18.5 gal (US) - 15 gal (US) -
    DEF Tank 4.2 gal (US) - - -
    Hydraulic System - Total 38.6 gal (US) - 26.4 gal (US) -
    Hydraulic System - Tank 18.5 gal (US) - 16.9 gal (US) -
    Engine Oil 9.5 gal (US) - 7.9 gal (US) -
    Transmission - Differential - Final Drives 34 gal (US) - 18.5 gal (US) -
    Tandem Housing - Each 34 gal (US) - 22.9 gal (US) -
    Front Wheel Spindle Bearing Housing 0.24 gal (US) - 0.13 gal (US) -
    Circle Drive Housing 2.6 gal (US) - 1.8 gal (US) -
    Diesel Exhaust Fluid - - 5.8 gal (US) -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - 8 Forward/6 Reverse -
    Transmission Direct drive, power shift, countershaft - APECS, Direct Drive, Powershift -
    Brakes - Dynamic Brake Torque per Wheel 27069.27 lb/ft - - -
    Brakes - Secondary Oil-actuated, oil-disc - Dual Circuit Control -
    Brakes - Service Oil-actuated, oil disc - Multiple Oil Disc -
    Brakes - Parking Spring applied, hydraulically released - Multiple Oil Disc -
    Brakes - Service - Surface Area - - 3565 in² -

    Hydraulic System
    Circuit Type Electro-hydraulic load sensing, closed center - Parallel -
    Pump Type Variable piston - Variable Piston -
    Maximum System Pressure 3590 psi - 3503 psi -
    Standby Pressure 856 psi - 885 psi -
    Pump Output* 74 gal/min - - -
    Note *Pump output measured at 2,150 rpm. - - -
    Pump Output - - 55.5 gal/min -
    Reservoir Tank Capacity - - 16.9 gal (US) -

    Blade Range
    Maximum Blade Position Angle 65° - 90° -
    Maximum Lift Above Ground 15.7 in 16.1 in 17.8 in 16.1 in
    Maximum Depth of Cut 18.5 in 30.5 in 29.5 in 21.7 in
    Maximum Shoulder Reach Outside of Tires - Right 91 in - 89.7 in -
    Moldboard Sideshift - Left 29.1 in - 20.1 in -
    Circle Centershift - Right 22 in - 28.7 in -
    Circle Centershift - Left 27.2 in - 27.4 in -
    Moldboard Sideshift - Right 31.1 in - 26 in -
    Maximum Shoulder Reach Outside of Tires - Left 91 in - 82.3 in -
    Blade Tip Range - Forward 40° - 40° -
    Blade Tip Range - Backward 5° - 5° -
    Blade Tip Range Forward - 40 - -
    Maximum Shoulder Reach Right - 76 in - -
    Moldboard Side Shift Right - 26.1 in - -
    Maximum Shoulder Reach Left - 69.4 in - -
    Moldboard Side Shift Left - 20.1 in - -
    Circle Center Shift Left - 26 in - -
    Blade Tip Range Backward - 5 - -
    Circle Center Shift Right - 26 in - -

    Ripper
    Ripping Depth - Maximum 17.8 in - 16.8 in -
    Shank Holder Spacing - Minimum 17.5 in - - -
    Shank Holder Spacing - Maximum 20 in - - -
    Ripper Shank Holders 7 - 5 -
    Penetration Force 30311 lb - 20812 lb -
    Pry-Out Force 43700 lb - 28493 lb -
    Machine Length Increase, Beam Raised 63.4 in - 40.6 in -
    Ripper Shank Holder Spacing - - 21 in -

    Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Total 84877 lb - - -
    Gross Vehicle Weight - Base** - Total 63528 lb - - -
    Gross Vehicle Weight - Typically Equipped - Rear Axle 52201 lb - - -
    Gross Vehicle Weight - Typically Equipped - Total 71454 lb - - -
    Gross Vehicle Weight - Maximum Tested - Front Axle 26125 lb - - -
    Gross Vehicle Weight - Typically Equipped - Front Axle 19253 lb - - -
    Gross Vehicle Weight - Maximum Tested - Rear Axle 58753 lb - - -
    Gross Vehicle Weight - Base** - Front Axle 17932 lb - - -
    Gross Vehicle Weight - Base** - Rear Axle 45596 lb - - -
    Note (1) *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. - - -
    Note (2) **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. - - -

    Dimensions (Approximate)
    Ground Clearance - Rear Axle 15.6 in - - -
    Length - Counterweight to Ripper 474.4 in - - -
    Length - Front Axle to Moldboard 120.7 in - - -
    Length - Front Axle to Mid Tandem 290 in - - -
    Height - Top of Cylinders 121.6 in - - -
    Width - Tire Center Lines 106.4 in - - -
    Width - Outside Rear Tires 134.3 in - - -
    Length - Between Tandem Axles 72.5 in - - -
    Height - Top of Cab 146.4 in - - -
    Width - Outside Front Tires 134.3 in - - -
    Height - Front Axle Center 28.9 in - - -
    Length - Front Tire to Rear of Machine - Including Tow Hitch 417 in - - -
    Height - Exhaust Stack 140 in - - -

    Standards
    Steering ISO 5010:2007 - ISO 5010 -
    Brakes ISO 3450:2011 - ISO 3450 -
    Sound ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 - ISO 6394; ISO 6395 -
    ROPS/FOPS ISO 3471:2008/ISO 3449:2005 - ISO 3471; ISO 3449 -
    Note (1) The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - - -
    Note (2) The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
    Gear - Reverse 3rd-6th 298 HP - - -
    Gear - Forward 8th 348 HP - - -
    Gear - Forward 3rd 298 HP - - -
    Gear - Forward 6th 320 HP - - -
    Gear - Forward 5th 311 HP - - -
    Gear - Reverse 1st 290 HP - - -
    Gear - Reverse 2nd 290 HP - - -
    Gear - Forward 4th 304 HP - - -
    Gear - Forward 7th 328 HP - - -
    Gear - Forward 1st 290 HP - - -
    Gear - Forward 2nd 290 HP - - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
    Gear - Forward 4th 309 HP - - -
    Gear - Reverse 1st 294 HP - - -
    Gear - Forward 3rd 302 HP - - -
    Gear - Reverse 3rd-6th 302 HP - - -
    Gear - Reverse 2nd 294 HP - - -
    Gear - Forward 7th 332 HP - - -
    Gear - Forward 6th 325 HP - - -
    Gear - Forward 8th 353 HP - - -
    Gear - Forward 1st 294 HP - - -
    Gear - Forward 5th 315 HP - - -
    Gear - Forward 2nd 294 HP - - -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (1) Tires: 23.5R25 Bridgestone VKT 2 Star - - -
    Wheel Group - 19.5×25 MP (2) Tires: 23.5R25 Bridgestone VKT 1 Star - - -
    Wheel Group - 19.5×25 MP (3) Tires: 23.5R25 Bridgestone VJT 1 Star - - -
    Wheel Group - 19.5×25 MP (4) Tires: 23.5R25 Michelin XHA 2 Star - - -
    Wheel Group - 19.5×25 MP (5) Tires: 23.5R25 Michelin XLDD 2 Star L5 - - -

    Operating Specifications
    Note Calculated with no slip and 23.5 R25 L-3 tires. - - -
    Steering Range - Left/Right 47.5° - 50° -
    Forward - 6th 16 mile/h - 14.7 mile/h -
    Forward - 4th 7.6 mile/h - 7 mile/h -
    Forward - 5th 11.8 mile/h - 10.8 mile/h -
    Turning Radius - Outside Front Tires 30.5 ft - 25.59 ft -
    Forward - 7th 22 mile/h - 20.3 mile/h -
    Top Speed - Forward 32.1 mile/h - 29.5 mile/h -
    Forward - 3rd 5.5 mile/h - 5.1 mile/h -
    Reverse - 6th 25.3 mile/h - 23.3 mile/h -
    Reverse - 5th 17.4 mile/h - 16 mile/h -
    Reverse - 2nd 4.1 mile/h - 3.8 mile/h -
    Reverse - 3rd 6 mile/h - 5.5 mile/h -
    Forward - 8th 32.1 mile/h - 29.5 mile/h -
    Reverse - 1st 2.2 mile/h - 2 mile/h -
    Forward - 1st 2.8 mile/h - 2.6 mile/h -
    Top Speed - Reverse 25.4 mile/h - 23.3 mile/h -
    Forward - 2nd 3.8 mile/h - 3.5 mile/h -
    Reverse - 4th 9.3 mile/h - 8.5 mile/h -
    Articulation Angle - Left/Right 20° - 20° -

    Frame
    Front Frame Structure - Height 18.1 in - 12.6 in -
    Front Frame Structure - Width 14 in - 12 in -
    Drawbar - Width 3 in - 3 in -
    Drawbar - Height 8 in - 6 in -
    Front Axle - Total Oscillation per Side 35° - 32° -
    Circle - Diameter 71.7 in - 61.1 in -
    Circle - Blade Beam Thickness 2 in - 1.6 in -
    Front Frame Structure - Thickness 0.6 in - - -
    Front Axle - Wheel Lean 18° Left/17° Right - - -
    Front Axle - Height to Center 26.4 in - 23.5 in -
    Circle - Height - - 6.3 in -
    Drawbar - Thickness - - 0.5 in -
    Front-Top/Bottom Plate - Width - - 12 in -
    Front-Top/Bottom Plate - Thickness - - 0.87 in -
    Front Axle - Wheel Lean - Left/Right - - 18° -

    Tandems
    Tandem Oscillation - Front Up 15° - 15° -
    Sidewall Thickness - Outer 0.9 in - 0.71 in -
    Sidewall Thickness - Inner 0.9 in - 0.69 in -
    Tandem Oscillation - Front Down 25° - 25° -
    Height 25.5 in - 22.5 in -
    Width 9.3 in - 8 in -
    Drive Chain Pitch 2.5 in - 2 in -
    Wheel Axle Spacing 72.5 in - 60 in -

    Service Refill Capacities
    Transmission and Differential - 9 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Fuel Tank - 65 gal (US) - -
    Cooling System - 14 gal (US) - -
    Engine Crankcase - 4.8 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5 gal (US) - -
    Hydraulic System - 25.6 gal (US) - -

    Machine Weight
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731 lb - -
    Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. - -
    Joystick Weight* Tier 4 - 35358 lb - -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846 lb - -
    Lever/Steering Wheel Weight* Tier 4 - 35067 lb - -
    Weight* - - - 161695 lb

    Air Conditioning System
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. - -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Dimensions
    Maximum Height - 136.4 in - -
    Length of Machine* - 387 in - -
    Width All Wheel Drive (AWD) - 2551 mm - -
    Width - 102 in - -
    Note - *Typically equipped with push block and ripper. - -
    Basic Blade Width - 12 ft - -
    Height - Top of Cab - - 130 in -
    Length - Counterweight to Ripper - - 399 in -
    Width - Outside Front Tires - - 98.9 in -
    Length - Front Axle to Mid Tandem - - 241 in -
    Length - Front Tire to Rear of Machine - - 351 in -
    Length - Front Axle to Moldboard - - 100 in -
    Length - Between Tandem Axles - - 60 in -
    Width - Outside Rear Tires - - 98.9 in -
    Width - Tire Center Lines - - 84.3 in -
    Height - Front Axle Center - - 23.5 in -
    Height - Exhaust Stack - - 128 in -
    Height - Top of Cylinders - - 120 in -
    Ground Clearance - Rear Axle - - 13.3 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in -
    Mid, V-Type - Working Width - - 46.6 in -
    Rear - Scarifying Depth, Maximum - - 16.8 in -
    Front, V-Type - Working Width - - 47.4 in -
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 5/11 -
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in -
    Mid, V-Type - Scarifier Shank Holders - - 11 -
    Rear - Working Width - - 84 in -
    Rear - Scarifier Shank Holders - - 9 -
    Rear - Scarifier Shank Holder Spacing - - 10.5 in -
    Add a Similar Product: