CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    14 Motor Grader
    View Product
    150 Motor Grader
    View Product Remove
    120 - 2019 - N Am, Global
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 238 HP - -
    Engine Model Cat C13 Cat® C9.3 Cat 7.1
    Bore 5.1 in 4.5 in 4.1 in
    Stroke 6.2 in 5.9 in 5.3 in
    Speed at Rated Power 1,850 rpm 2,000 rpm -
    Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - Power as declared per ISO 14396
    Standard Capability 122 °F 109 °F 122 °F
    Note (2) Optimized VHP Plus is standard for the 14M3. - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Torque Rise 41% 39% -
    Maximum Altitude - Full Power 13900 ft - -
    Maximum Torque - VHP Plus 1137 lb/ft 920 lb/ft -
    Emissions Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
    Maximum Altitude - Full Power (Tier 3) 14349 ft - -
    Maximum Altitude - Full Power (Tier 2) 12049 ft - -
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
    Standard - Fan Speed - Minimum 550 rpm - -
    Note (4) Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) - -
    Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - -
    Standard - Fan Speed - Maximum 1,600 rpm - -
    Displacement 763 in³ 567.5 in³ 427.8 in³
    Number of Cylinders 6 6 6
    Net Power Range (Tier 4) - 200 HP -
    High Ambient - Fan Speed - Standard - 1,400 rpm -
    VHP Plus Range - Net - Metric - 149-188 kW (202-255 hp) -
    VHP Plus Range - Net - 149-188 kW (200-252 hp) -
    VHP Plus - Gear - Net Power - Reverse 1st - 200 HP -
    VHP Plus - Gear - Net Power - Forward 1st - 200 HP -
    VHP Plus - Gear - Net Power - Forward 8th - 252 HP -
    VHP Plus - Gear - Net Power - Forward 6th - 241 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - 210 HP -
    VHP Plus - Gear - Net Power - Forward 7th - 247 HP -
    VHP Plus - Gear - Net Power - Forward 5th - 236 HP -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 220 HP -
    VHP Plus - Gear - Net Power - Forward 4th - 231 HP -
    Base Power (1st Gear) - Net - Metric - 202 HP -
    VHP Plus - Gear - Net Power - Reverse 2nd - 210 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - 220 HP -
    Derating Altitude - 10000 ft 9842.5 ft
    High Ambient - Fan Speed - Maximum - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - 500 rpm -
    High - Ambient Capability - 122 °F -
    Maximum Torque - ISO 9249 - - 606 lb/ft
    All-Wheel Drive Net Power Range (Tier 3) - - 130 HP
    Net Power Range (Tier 3) - - 130 HP
    Engine RPM - - 2,000
    Maximum Torque - AWD On - - 611 lb/ft
    Derating Altitude (AWD) - - 5499 ft
    Torque Rise - ISO 9294 - - 42%

    Weights
    Operating Weight - Typically Equipped 57250 lb 43950 lb 35067 lb
    Gross Vehicle Weight - Base* - Total 50980 lb - -
    Gross Vehicle Weight - Base* - Front Axle 13994 lb - -
    Gross Vehicle Weight - Typically Equipped - Total 57250 lb - -
    Gross Vehicle Weight - Typically Equipped - Rear Axle 42005 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle 15245 lb - -
    Gross Vehicle Weight - Base* - Rear Axle 36994 lb - -
    Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. - -
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb -
    Operating Weight - Typically Equipped - Front Axle - 12549 lb -
    Operating Weight - Typically Equipped - Rear Axle - 31401 lb -
    Gross Vehicle Weight - Base - Front Axle - 9601 lb -
    Gross Vehicle Weight - Base - Rear Axle - 28590 lb -
    Gross Vehicle Weight - Maximum - Total - 55144 lb -
    Operating Weight - Typically Equipped - Total - 43950 lb -
    Gross Vehicle Weight - Base - Total - 38191 lb -

    Moldboard
    Blade Width 14 ft 12 ft 12 ft
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 4.6 in 6.5 in 4.1 in
    Blade Width - With End Bits 169 in - -
    Blade Height - With Cutting Edge 24.9 in - -
    Blade Width - Without End Bits 164 in - -
    Blade Height - Without Cutting Edge 23 in - -
    Moldboard - Height - 24 in -
    Moldboard - Thickness - 0.87 in -
    Cutting Edge Width - 6 in -
    Cutting Edge Thickness - 0.6 in -
    End Bit - Width - 6 in -
    End Bit - Thickness - 0.6 in -
    Blade Pull - Base GVW - 25732 lb -
    Blade Pull - Maximum GVW - 34262 lb -
    Blade Down Pressure - Base GVW - 16480 lb -
    Blade Down Pressure - Maximum GVW - 29308 lb -
    Moldboard - Blade Width - 12 ft -
    Blade Height - - 24 in
    End Bit - - 6 in
    Cutting Edge - - 6 in

    Blade Range
    Maximum Depth of Cut 23.3 in 28.1 in 30.5 in
    Circle Centershift - Left 25.6 in 27.4 in -
    Maximum Lift Above Ground 16.5 in 18.9 in 16.1 in
    Circle Centershift - Right 20.5 in 28.7 in -
    Blade Tip Range - Backward 5° 5° -
    Maximum Shoulder Reach Outside of Tires - Right 78.9 in 77.9 in -
    Moldboard Sideshift - Right 31.1 in 26 in -
    Moldboard Sideshift - Left 29.1 in 20.1 in -
    Maximum Shoulder Reach Outside of Tires - Left 73.6 in 70.5 in -
    Blade Tip Range - Forward 40° 40° -
    Maximum Blade Position Angle - 90° -
    Blade Tip Range Forward - - 40
    Maximum Shoulder Reach Right - - 76 in
    Moldboard Side Shift Right - - 26.1 in
    Maximum Shoulder Reach Left - - 69.4 in
    Moldboard Side Shift Left - - 20.1 in
    Circle Center Shift Left - - 26 in
    Blade Tip Range Backward - - 5
    Circle Center Shift Right - - 26 in

    Frame
    Circle - Outer Diameter 71.7 in - -
    Front Axle - Wheel Lean - Left/Right 17.1° 18° -
    Front Axle - Total Oscillation per Side 32° 32° -
    Drawbar - Width - 3 in -
    Circle - Diameter - 60.2 in -
    Circle - Blade Beam Thickness - 1.6 in -
    Drawbar - Height - 6 in -
    Front Frame Structure - Width - 12 in -
    Front Frame Structure - Height - 12.6 in -
    Circle - Height - 5.4 in -
    Drawbar - Thickness - 0.5 in -
    Front-Top/Bottom Plate - Width - 12 in -
    Front-Top/Bottom Plate - Thickness - 0.87 in -
    Front Axle - Height to Center - 23.5 in -

    Service Refill Capacities
    Transmission and Differential 23.5 gal (US) - 9 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) 5.8 gal (US) - 5 gal (US)
    Hydraulic System 33 gal (US) - 25.6 gal (US)
    Circle Drive 1.8 gal (US) - 1.8 gal (US)
    Cooling System 15.9 gal (US) - 14 gal (US)
    Fuel Tank 109.9 gal (US) - 65 gal (US)
    Engine Crankcase - - 4.8 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -
    Note - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes.

    Operating Specifications
    Top Speed - Forward - 29 mile/h -
    Top Speed - Reverse - 23 mile/h -
    Turning Radius - Outside Front Tires - 25.59 ft -
    Steering Range - Left/Right - 50° -
    Articulation Angle - Left/Right - 20° -
    Forward - 1st - 2.5 mile/h -
    Forward - 2nd - 3.4 mile/h -
    Forward - 3rd - 5 mile/h -
    Forward - 4th - 6.9 mile/h -
    Forward - 5th - 10.6 mile/h -
    Forward - 6th - 14.5 mile/h -
    Forward - 7th - 19.9 mile/h -
    Forward - 8th - 29 mile/h -
    Reverse - 1st - 2 mile/h -
    Reverse - 2nd - 3.7 mile/h -
    Reverse - 3rd - 5.4 mile/h -
    Reverse - 4th - 8.4 mile/h -
    Reverse - 5th - 15.7 mile/h -
    Reverse - 6th - 23 mile/h -

    Service Refill
    Fuel Capacity - 104 gal (US) -
    Cooling System - 15 gal (US) -
    Hydraulic System - Total - 26.4 gal (US) -
    Hydraulic System - Tank - 16.9 gal (US) -
    Transmission - Differential - Final Drives - 18.5 gal (US) -
    Diesel Exhaust Fluid - 5.8 gal (US) -
    Engine Oil - 7.9 gal (US) -
    Tandem Housing - Each - 20 gal (US) -
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) -
    Circle Drive Housing - 1.8 gal (US) -

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse -
    Transmission - APECS, Direct Drive, Powershift -
    Brakes - Service - Multiple Oil Disc -
    Brakes - Service - Surface Area - 3565 in² -
    Brakes - Parking - Multiple Oil Disc -
    Brakes - Secondary - Dual Circuit -

    Hydraulic System
    Circuit Type - Parallel -
    Pump Type - Variable Piston -
    Pump Output - 55.7 gal/min -
    Maximum System Pressure - 3500 psi -
    Reservoir Tank Capacity - 16.9 gal (US) -
    Standby Pressure - 885 psi -

    Ripper
    Ripper Shank Holder Spacing - 21 in -
    Ripping Depth - Maximum - 16.8 in -
    Ripper Shank Holders - 5 -
    Penetration Force - 20812 lb -
    Pry-Out Force - 27794 lb -
    Machine Length Increase, Beam Raised - 40.6 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 11-May -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in -
    Rear - Scarifying Depth, Maximum - 16.8 in -
    Mid, V-Type - Working Width - 46.6 in -
    Front, V-Type - Working Width - 47.4 in -
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in -
    Mid, V-Type - Scarifier Shank Holders - 11 -
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in -
    Rear - Working Width - 84 in -
    Rear - Scarifier Shank Holders - 9 -
    Rear - Scarifier Shank Holder Spacing - 10.5 in -

    Standards
    Steering - ISO 5010 -
    ROPS/FOPS - ISO 3471/ISO 3449 -
    Brakes - ISO 3450 -
    Sound - ISO 6394; ISO 6395 -

    Tandems
    Height - 19.9 in -
    Width - 7.9 in -
    Sidewall Thickness - Inner - 0.63 in -
    Sidewall Thickness - Outer - 0.71 in -
    Drive Chain Pitch - 2 in -
    Wheel Axle Spacing - 60 in -
    Tandem Oscillation - Front Up - 15° -
    Tandem Oscillation - Front Down - 25° -

    Dimensions
    Height - Top of Cab - 130 in -
    Length - Counterweight to Ripper - 399 in -
    Width - Outside Front Tires - 98.9 in -
    Length - Front Axle to Mid Tandem - 241 in -
    Length - Front Tire to Rear of Machine - 351 in -
    Length - Front Axle to Moldboard - 100 in -
    Length - Between Tandem Axles - 60 in -
    Width - Outside Rear Tires - 98.9 in -
    Width - Tire Center Lines - 84.3 in -
    Height - Front Axle Center - 23.5 in -
    Height - Exhaust Stack - 128 in -
    Height - Top of Cylinders - 120 in -
    Ground Clearance - Rear Axle - 13.3 in -
    Maximum Height - - 136.4 in
    Length of Machine* - - 387 in
    Width All Wheel Drive (AWD) - - 2551 mm
    Width - - 102 in
    Note - - *Typically equipped with push block and ripper.
    Basic Blade Width - - 12 ft

    Machine Weight
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - 36731 lb
    Note (1) - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
    Joystick Weight* Tier 4 - - 35358 lb
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - 36846 lb
    Lever/Steering Wheel Weight* Tier 4 - - 35067 lb
    Add a Similar Product: