|
|
|
120 - 2019 - N Am, Global
|
|
Engine |
Base Power (1st Gear) - Net |
238 HP |
221 HP |
- |
- |
Engine Model |
Cat C13 |
Cat® C9.3 |
Cat 7.1 |
Cat® C4.4 |
Bore |
5.1 in |
4.5 in |
4.1 in |
4.1 in |
Stroke |
6.2 in |
5.9 in |
5.3 in |
5 in |
Speed at Rated Power |
1,850 rpm |
2,000 rpm |
- |
- |
Note (3) |
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
Power as declared per ISO 14396 |
- |
Standard Capability |
122 °F |
109 °F |
122 °F |
- |
Note (2) |
Optimized VHP Plus is standard for the 14M3. |
- |
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
Torque Rise |
41% |
39% |
- |
- |
Maximum Altitude - Full Power |
13900 ft |
- |
- |
- |
Maximum Torque - VHP Plus |
1137 lb/ft |
1000 lb/ft |
- |
- |
Emissions |
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
U.S. EPA Tier 4 Final/EU Stage V |
U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA |
Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards |
Maximum Altitude - Full Power (Tier 3) |
14349 ft |
- |
- |
- |
Maximum Altitude - Full Power (Tier 2) |
12049 ft |
- |
- |
- |
Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
- |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, |
Standard - Fan Speed - Minimum |
550 rpm |
- |
- |
- |
Note (4) |
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) |
- |
- |
- |
Note (5) |
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
- |
- |
- |
Standard - Fan Speed - Maximum |
1,600 rpm |
- |
- |
- |
Displacement |
763 in³ |
567.5 in³ |
427.8 in³ |
268.5 in³ |
Number of Cylinders |
6 |
6 |
6 |
- |
VHP Plus - Gear - Net Power - Forward 1st |
- |
221 HP |
- |
- |
VHP Plus - Gear - Net Power - Forward 8th |
- |
272 HP |
- |
- |
VHP Plus - Gear - Net Power - Forward 3rd |
- |
241 HP |
- |
- |
VHP Plus - Gear - Net Power - Forward 4th |
- |
252 HP |
- |
- |
VHP Plus - Gear - Net Power - Forward 2nd |
- |
231 HP |
- |
- |
VHP Plus - Gear - Net Power - Forward 6th |
- |
262 HP |
- |
- |
VHP Plus Range - Net |
- |
165-203 kW (221-272 hp) |
- |
- |
VHP Plus - Gear - Net Power - Forward 7th |
- |
267 HP |
- |
- |
VHP Plus - Gear - Net Power - Reverse 1st |
- |
221 HP |
- |
- |
Base Power (1st Gear) - Net - Metric |
- |
224 HP |
- |
- |
High Ambient - Fan Speed - Standard |
- |
1,400 rpm |
- |
- |
VHP Plus - Gear - Net Power - Forward 5th |
- |
257 HP |
- |
- |
VHP Plus - Gear - Net Power - Reverse 2nd |
- |
231 HP |
- |
- |
VHP Plus Range - Net - Metric |
- |
165-203 kW (224-276 hp) |
- |
- |
VHP Plus - Gear - Net Power - Reverse 3rd-6th |
- |
241 HP |
- |
- |
Derating Altitude |
- |
10000 ft |
9842.5 ft |
9842 ft |
High Ambient - Fan Speed - Maximum |
- |
1,550 rpm |
- |
- |
High Ambient - Fan Speed - Minimum |
- |
500 rpm |
- |
- |
High - Ambient Capability |
- |
122 °F |
- |
- |
Maximum Torque - ISO 9249 |
- |
- |
606 lb/ft |
- |
All-Wheel Drive Net Power Range (Tier 3) |
- |
- |
130 HP |
- |
Net Power Range (Tier 3) |
- |
- |
130 HP |
- |
Engine RPM |
- |
- |
2,000 |
- |
Maximum Torque - AWD On |
- |
- |
611 lb/ft |
- |
Derating Altitude (AWD) |
- |
- |
5499 ft |
- |
Torque Rise - ISO 9294 |
- |
- |
42% |
21% |
Net Power - ISO 9249/SAE J1349 |
- |
- |
- |
171 HP |
Maximum Torque |
- |
- |
- |
544 lb/ft |
Engine Power AWD (ISO 14396) |
- |
- |
- |
128 kW |
Weights |
Operating Weight - Typically Equipped |
57250 lb |
45547 lb |
35067 lb |
31958 lb |
Gross Vehicle Weight - Base* - Total |
50980 lb |
- |
- |
- |
Gross Vehicle Weight - Base* - Front Axle |
13994 lb |
- |
- |
- |
Gross Vehicle Weight - Typically Equipped - Total |
57250 lb |
- |
- |
- |
Gross Vehicle Weight - Typically Equipped - Rear Axle |
42005 lb |
- |
- |
- |
Gross Vehicle Weight - Typically Equipped - Front Axle |
15245 lb |
- |
- |
- |
Gross Vehicle Weight - Base* - Rear Axle |
36994 lb |
- |
- |
- |
Note |
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
- |
- |
- |
Gross Vehicle Weight - Maximum - Rear Axle |
- |
38069 lb |
- |
- |
Gross Vehicle Weight - Base - Front Axle |
- |
9907 lb |
- |
- |
Gross Vehicle Weight - Base - Rear Axle |
- |
28812 lb |
- |
- |
Gross Vehicle Weight - Maximum - Total |
- |
55144 lb |
- |
- |
Operating Weight - Typically Equipped - Front Axle |
- |
13237 lb |
- |
- |
Gross Vehicle Weight - Base - Total |
- |
38719 lb |
- |
- |
Gross Vehicle Weight - Maximum - Front Axle |
- |
17075 lb |
- |
- |
Operating Weight - Typically Equipped - Total |
- |
45547 lb |
- |
- |
Operating Weight - Typically Equipped - Rear Axle |
- |
32310 lb |
- |
- |
Moldboard |
Blade Width |
14 ft |
14 ft |
12 ft |
12 ft |
Arc Radius |
16.3 in |
16.3 in |
16.3 in |
16.3 in |
Throat Clearance |
4.6 in |
6.5 in |
4.1 in |
4.7 in |
Blade Width - With End Bits |
169 in |
- |
- |
- |
Blade Height - With Cutting Edge |
24.9 in |
- |
- |
- |
Blade Width - Without End Bits |
164 in |
- |
- |
- |
Blade Height - Without Cutting Edge |
23 in |
- |
- |
- |
Moldboard - Height |
- |
24 in |
- |
- |
Moldboard - Thickness |
- |
0.87 in |
- |
- |
Cutting Edge Width |
- |
6 in |
- |
6 in |
Cutting Edge Thickness |
- |
0.6 in |
- |
- |
End Bit - Width |
- |
6 in |
- |
152 in |
End Bit - Thickness |
- |
0.6 in |
- |
- |
Blade Pull - Base GVW |
- |
25931 lb |
- |
- |
Blade Pull - Maximum GVW |
- |
34262 lb |
- |
- |
Blade Down Pressure - Base GVW |
- |
17004 lb |
- |
- |
Blade Down Pressure - Maximum GVW |
- |
29308 lb |
- |
- |
Moldboard - Blade Width |
- |
14 ft |
- |
- |
Blade Height |
- |
- |
24 in |
20 in |
End Bit |
- |
- |
6 in |
- |
Cutting Edge |
- |
- |
6 in |
- |
Blade Range |
Maximum Depth of Cut |
23.3 in |
29.5 in |
30.5 in |
30.5 in |
Circle Centershift - Left |
25.6 in |
27.4 in |
- |
25.8 in |
Maximum Lift Above Ground |
16.5 in |
17.8 in |
16.1 in |
16.1 in |
Circle Centershift - Right |
20.5 in |
28.7 in |
- |
25.8 in |
Blade Tip Range - Backward |
5° |
5° |
- |
5° |
Maximum Shoulder Reach Outside of Tires - Right |
78.9 in |
89.7 in |
- |
- |
Moldboard Sideshift - Right |
31.1 in |
26 in |
- |
26.1 in |
Moldboard Sideshift - Left |
29.1 in |
20.1 in |
- |
20.2 in |
Maximum Shoulder Reach Outside of Tires - Left |
73.6 in |
82.3 in |
- |
- |
Blade Tip Range - Forward |
40° |
40° |
- |
40° |
Maximum Blade Position Angle |
- |
90° |
- |
- |
Blade Tip Range Forward |
- |
- |
40 |
- |
Maximum Shoulder Reach Right |
- |
- |
76 in |
- |
Moldboard Side Shift Right |
- |
- |
26.1 in |
- |
Maximum Shoulder Reach Left |
- |
- |
69.4 in |
- |
Moldboard Side Shift Left |
- |
- |
20.1 in |
- |
Circle Center Shift Left |
- |
- |
26 in |
- |
Blade Tip Range Backward |
- |
- |
5 |
- |
Circle Center Shift Right |
- |
- |
26 in |
- |
Frame |
Circle - Outer Diameter |
71.7 in |
- |
- |
- |
Front Axle - Wheel Lean - Left/Right |
17.1° |
18° |
- |
- |
Front Axle - Total Oscillation per Side |
32° |
32° |
- |
- |
Drawbar - Width |
- |
3 in |
- |
- |
Circle - Diameter |
- |
61.1 in |
- |
- |
Circle - Blade Beam Thickness |
- |
1.6 in |
- |
- |
Drawbar - Height |
- |
6 in |
- |
- |
Front Frame Structure - Width |
- |
12 in |
- |
- |
Circle - Height |
- |
6.3 in |
- |
- |
Front Frame Structure - Height |
- |
12.6 in |
- |
- |
Drawbar - Thickness |
- |
0.5 in |
- |
- |
Front-Top/Bottom Plate - Width |
- |
12 in |
- |
- |
Front-Top/Bottom Plate - Thickness |
- |
0.87 in |
- |
- |
Front Axle - Height to Center |
- |
23.5 in |
- |
- |
Service Refill Capacities |
Transmission and Differential |
23.5 gal (US) |
- |
9 gal (US) |
- |
Diesel Exhaust Fluid Tank (Tier 4 Only) |
5.8 gal (US) |
- |
5 gal (US) |
3.2 gal (US) |
Hydraulic System |
33 gal (US) |
- |
25.6 gal (US) |
14.5 gal (US) |
Circle Drive |
1.8 gal (US) |
- |
1.8 gal (US) |
- |
Cooling System |
15.9 gal (US) |
- |
14 gal (US) |
10.3 gal (US) |
Fuel Tank |
109.9 gal (US) |
- |
65 gal (US) |
71 gal (US) |
Engine Crankcase |
- |
- |
4.8 gal (US) |
2 gal (US) |
Circle Drive without Slip Clutch |
- |
- |
- |
0.4 gal (US) |
Circle Drive with Slip Clutch |
- |
- |
- |
1.8 gal (US) |
Transmission |
- |
- |
- |
4.5 gal (US) |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
- |
- |
Note |
- |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. |
- |
Operating Specifications |
Top Speed - Forward |
- |
29.5 mile/h |
- |
- |
Top Speed - Reverse |
- |
23.3 mile/h |
- |
- |
Turning Radius - Outside Front Tires |
- |
25.59 ft |
- |
- |
Steering Range - Left/Right |
- |
50° |
- |
- |
Articulation Angle - Left/Right |
- |
20° |
- |
- |
Forward - 1st |
- |
2.6 mile/h |
- |
- |
Forward - 2nd |
- |
3.5 mile/h |
- |
- |
Forward - 3rd |
- |
5.1 mile/h |
- |
- |
Forward - 4th |
- |
7 mile/h |
- |
- |
Forward - 5th |
- |
10.8 mile/h |
- |
- |
Forward - 6th |
- |
14.7 mile/h |
- |
- |
Forward - 7th |
- |
20.3 mile/h |
- |
- |
Forward - 8th |
- |
29.5 mile/h |
- |
- |
Reverse - 1st |
- |
2 mile/h |
- |
- |
Reverse - 2nd |
- |
3.8 mile/h |
- |
- |
Reverse - 3rd |
- |
5.5 mile/h |
- |
- |
Reverse - 4th |
- |
8.5 mile/h |
- |
- |
Reverse - 5th |
- |
16 mile/h |
- |
- |
Reverse - 6th |
- |
23.3 mile/h |
- |
- |
Service Refill |
Fuel Capacity |
- |
104 gal (US) |
- |
- |
Cooling System |
- |
15 gal (US) |
- |
- |
Hydraulic System - Total |
- |
26.4 gal (US) |
- |
- |
Hydraulic System - Tank |
- |
16.9 gal (US) |
- |
- |
Transmission - Differential - Final Drives |
- |
18.5 gal (US) |
- |
- |
Diesel Exhaust Fluid |
- |
5.8 gal (US) |
- |
- |
Engine Oil |
- |
7.9 gal (US) |
- |
- |
Tandem Housing - Each |
- |
22.9 gal (US) |
- |
- |
Front Wheel Spindle Bearing Housing |
- |
0.13 gal (US) |
- |
- |
Circle Drive Housing |
- |
1.8 gal (US) |
- |
- |
Power Train |
Forward/Reverse Gears |
- |
8 Forward/6 Reverse |
- |
- |
Transmission |
- |
APECS, Direct Drive, Powershift |
- |
- |
Brakes - Service |
- |
Multiple Oil Disc |
- |
- |
Brakes - Service - Surface Area |
- |
3565 in² |
- |
- |
Brakes - Parking |
- |
Multiple Oil Disc |
- |
- |
Brakes - Secondary |
- |
Dual Circuit Control |
- |
- |
Hydraulic System |
Circuit Type |
- |
Parallel |
- |
- |
Pump Type |
- |
Variable Piston |
- |
- |
Pump Output |
- |
55.5 gal/min |
- |
- |
Maximum System Pressure |
- |
3503 psi |
- |
- |
Reservoir Tank Capacity |
- |
16.9 gal (US) |
- |
- |
Standby Pressure |
- |
885 psi |
- |
- |
Ripper |
Ripping Depth - Maximum |
- |
16.8 in |
- |
- |
Ripper Shank Holder Spacing |
- |
21 in |
- |
- |
Ripper Shank Holders |
- |
5 |
- |
- |
Penetration Force |
- |
20812 lb |
- |
- |
Pry-Out Force |
- |
28493 lb |
- |
- |
Machine Length Increase, Beam Raised |
- |
40.6 in |
- |
- |
Scarifier |
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing |
- |
4.6 in |
- |
- |
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum |
- |
18.4 in |
- |
- |
Mid, V-Type - Working Width |
- |
46.6 in |
- |
- |
Rear - Scarifying Depth, Maximum |
- |
16.8 in |
- |
- |
Front, V-Type - Working Width |
- |
47.4 in |
- |
- |
Mid, V-Type - Scarifier Shank Holder Spacing |
- |
4.6 in |
- |
- |
Mid, V-Type - Scarifying Depth, Maximum |
- |
11.5 in |
- |
- |
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders |
- |
5/11 |
- |
- |
Front, V-Type, 5 or 11 Tooth - Working Width |
- |
40.6 in |
- |
- |
Mid, V-Type - Scarifier Shank Holders |
- |
11 |
- |
- |
Rear - Working Width |
- |
84 in |
- |
- |
Rear - Scarifier Shank Holders |
- |
9 |
- |
- |
Rear - Scarifier Shank Holder Spacing |
- |
10.5 in |
- |
- |
Standards |
Brakes |
- |
ISO 3450 |
- |
- |
ROPS/FOPS |
- |
ISO 3471; ISO 3449 |
- |
- |
Steering |
- |
ISO 5010 |
- |
- |
Sound |
- |
ISO 6394; ISO 6395 |
- |
- |
Tandems |
Height |
- |
22.5 in |
- |
- |
Width |
- |
8 in |
- |
- |
Sidewall Thickness - Inner |
- |
0.69 in |
- |
- |
Sidewall Thickness - Outer |
- |
0.71 in |
- |
- |
Drive Chain Pitch |
- |
2 in |
- |
- |
Wheel Axle Spacing |
- |
60 in |
- |
- |
Tandem Oscillation - Front Up |
- |
15° |
- |
- |
Tandem Oscillation - Front Down |
- |
25° |
- |
- |
Dimensions |
Height - Top of Cab |
- |
130 in |
- |
- |
Length - Counterweight to Ripper |
- |
399 in |
- |
- |
Width - Outside Front Tires |
- |
98.9 in |
- |
- |
Length - Front Axle to Mid Tandem |
- |
241 in |
- |
- |
Length - Front Tire to Rear of Machine |
- |
351 in |
- |
- |
Length - Front Axle to Moldboard |
- |
100 in |
- |
- |
Length - Between Tandem Axles |
- |
60 in |
- |
- |
Width - Outside Rear Tires |
- |
98.9 in |
- |
- |
Width - Tire Center Lines |
- |
84.3 in |
- |
- |
Height - Front Axle Center |
- |
23.5 in |
- |
- |
Height - Exhaust Stack |
- |
128 in |
- |
- |
Height - Top of Cylinders |
- |
120 in |
- |
- |
Ground Clearance - Rear Axle |
- |
13.3 in |
- |
- |
Maximum Height |
- |
- |
136.4 in |
149.1 in |
Length of Machine* |
- |
- |
387 in |
391.4 in |
Width All Wheel Drive (AWD) |
- |
- |
2551 mm |
- |
Width |
- |
- |
102 in |
94.6 in |
Note |
- |
- |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
Basic Blade Width |
- |
- |
12 ft |
- |
Machine Weight |
Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 |
- |
- |
36731 lb |
- |
Note (1) |
- |
- |
*Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
- |
Joystick Weight* Tier 4 |
- |
- |
35358 lb |
- |
Joystick All-Wheel Drive (AWD) Weight* Tier 4 |
- |
- |
36846 lb |
- |
Lever/Steering Wheel Weight* Tier 4 |
- |
- |
35067 lb |
- |
All-Wheel Drive (AWD) Weight |
- |
- |
- |
36376 lb |
Sustainability |
Recyclability |
- |
- |
- |
92% |