CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    14 Motor Grader
    View Product
    16 Motor Grader
    View Product Remove
    150 Motor Grader
    View Product Remove
    140 Motor Grader LVR
    View Product Remove

    Engine
    Base Power (1st Gear) - Net 238 HP 290 HP - -
    Engine Model Cat C13 Cat® C13 Cat® C9.3 Cat C9.3
    Bore 5.1 in 5.1 in 4.5 in 4.5 in
    Stroke 6.2 in 6.2 in 5.9 in 5.9 in
    Speed at Rated Power 1,850 rpm 2,000 rpm 2,000 rpm -
    Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - - -
    Standard Capability 122 °F - 109 °F 109 °F
    Note (2) Optimized VHP Plus is standard for the 14M3. - - -
    Torque Rise 41% - 39% -
    Maximum Altitude - Full Power 13900 ft - - -
    Maximum Torque - VHP Plus 1137 lb/ft - 920 lb/ft -
    Emissions Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent - U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    Maximum Altitude - Full Power (Tier 3) 14349 ft - - -
    Maximum Altitude - Full Power (Tier 2) 12049 ft - - -
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - - -
    Standard - Fan Speed - Minimum 550 rpm 550 rpm - -
    Note (4) Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) - - -
    Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. - - -
    Standard - Fan Speed - Maximum 1,600 rpm 1,450 rpm - -
    Displacement 763 in³ 763 in³ 567.5 in³ 567.5 in³
    Number of Cylinders 6 6 6 6
    Optimized VHP Range - Net - 216-259 kW (290-348 hp) - -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 12176 ft - -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 1270 lb/ft - -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) - 1306 lb/ft - -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 1270 lb/ft - -
    Emissions (2) - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country - -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) - 43% - -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 39% - -
    Standard - Ambient Capability - 122 °F - -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 12973 ft - -
    VHP Range - Net - Metric - 216-259 kW (294-353 hp) - -
    Base Power (1st Gear) - Net - Metric - 294 HP 202 HP -
    Emissions (3) - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country - -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 39% - -
    Emissions (1) - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) - -
    VHP Range - Net - 216-259 kW (290-348 hp) - -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) - 12500 ft - -
    Net Power Range (Tier 4) - - 200 HP -
    High Ambient - Fan Speed - Standard - - 1,400 rpm -
    VHP Plus Range - Net - Metric - - 149-188 kW (202-255 hp) -
    VHP Plus Range - Net - - 149-188 kW (200-252 hp) -
    VHP Plus - Gear - Net Power - Reverse 1st - - 200 HP -
    VHP Plus - Gear - Net Power - Forward 1st - - 200 HP -
    VHP Plus - Gear - Net Power - Forward 8th - - 252 HP -
    VHP Plus - Gear - Net Power - Forward 6th - - 241 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - - 210 HP -
    VHP Plus - Gear - Net Power - Forward 7th - - 247 HP -
    VHP Plus - Gear - Net Power - Forward 5th - - 236 HP -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 220 HP -
    VHP Plus - Gear - Net Power - Forward 4th - - 231 HP -
    VHP Plus - Gear - Net Power - Reverse 2nd - - 210 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - - 220 HP -
    Derating Altitude - - 10000 ft -
    High Ambient - Fan Speed - Maximum - - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - - 500 rpm -
    High - Ambient Capability - - 122 °F -
    Net Power - EEC 80/1269 - - - 250 HP
    Net Power - ISO 9249/SAE J1349 - - - 250 HP
    Engine RPM - - - 2,000
    Torque Rise - ISO 9294 - - - 44%

    Weights
    Operating Weight - Typically Equipped 57250 lb 71454 lb 43950 lb 20236 lb
    Gross Vehicle Weight - Base* - Total 50980 lb - - -
    Gross Vehicle Weight - Base* - Front Axle 13994 lb - - -
    Gross Vehicle Weight - Typically Equipped - Total 57250 lb - - -
    Gross Vehicle Weight - Typically Equipped - Rear Axle 42005 lb - - -
    Gross Vehicle Weight - Typically Equipped - Front Axle 15245 lb - - -
    Gross Vehicle Weight - Base* - Rear Axle 36994 lb - - -
    Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. - - -
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb -
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb -
    Operating Weight - Typically Equipped - Front Axle - - 12549 lb -
    Operating Weight - Typically Equipped - Rear Axle - - 31401 lb -
    Gross Vehicle Weight - Base - Front Axle - - 9601 lb -
    Gross Vehicle Weight - Base - Rear Axle - - 28590 lb -
    Gross Vehicle Weight - Maximum - Total - - 55144 lb -
    Operating Weight - Typically Equipped - Total - - 43950 lb -
    Gross Vehicle Weight - Base - Total - - 38191 lb -

    Moldboard
    Blade Width 14 ft 16 ft 12 ft 12 ft
    Arc Radius 16.3 in 16.3 in 16.3 in 16.3 in
    Throat Clearance 4.6 in 5 in 6.5 in 6.5 in
    Blade Width - With End Bits 169 in - - -
    Blade Height - With Cutting Edge 24.9 in - - -
    Blade Width - Without End Bits 164 in - - -
    Blade Height - Without Cutting Edge 23 in - - -
    Note - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. - -
    Thickness - 1 in - -
    End Bit - Width - 6 in 6 in -
    Blade Pull* - Base GVW - 41039 lb - -
    Cutting Edge Width - 8 in 6 in -
    Cutting Edge Thickness - 1 in 0.6 in -
    Down Force - Maximum GVW - 43861 lb - -
    Height - 31 in - -
    Width - 16 ft - -
    Down Force - Base GVW - 30743 lb - -
    Blade Pull* - Maximum GVW - 52878 lb - -
    End Bit - Thickness - 0.75 in 0.6 in -
    Moldboard - Height - - 24 in -
    Moldboard - Thickness - - 0.87 in -
    Blade Pull - Base GVW - - 25732 lb -
    Blade Pull - Maximum GVW - - 34262 lb -
    Blade Down Pressure - Base GVW - - 16480 lb -
    Blade Down Pressure - Maximum GVW - - 29308 lb -
    Moldboard - Blade Width - - 12 ft -
    Cutting Edge - - - 6 in
    End Bit - - - 6 in

    Blade Range
    Maximum Depth of Cut 23.3 in 18.5 in 28.1 in 28.9 in
    Circle Centershift - Left 25.6 in 27.2 in 27.4 in -
    Maximum Lift Above Ground 16.5 in 15.7 in 18.9 in 18.9 in
    Circle Centershift - Right 20.5 in 22 in 28.7 in -
    Blade Tip Range - Backward 5° 5° 5° -
    Maximum Shoulder Reach Outside of Tires - Right 78.9 in 91 in 77.9 in -
    Moldboard Sideshift - Right 31.1 in 31.1 in 26 in -
    Moldboard Sideshift - Left 29.1 in 29.1 in 20.1 in -
    Maximum Shoulder Reach Outside of Tires - Left 73.6 in 91 in 70.5 in -
    Blade Tip Range - Forward 40° 40° 40° -
    Maximum Blade Position Angle - 65° 90° -

    Frame
    Circle - Outer Diameter 71.7 in - - -
    Front Axle - Wheel Lean - Left/Right 17.1° - 18° -
    Front Axle - Total Oscillation per Side 32° 35° 32° -
    Front Frame Structure - Height - 18.1 in 12.6 in -
    Front Frame Structure - Width - 14 in 12 in -
    Drawbar - Width - 3 in 3 in -
    Drawbar - Height - 8 in 6 in -
    Circle - Diameter - 71.7 in 60.2 in -
    Circle - Blade Beam Thickness - 2 in 1.6 in -
    Front Frame Structure - Thickness - 0.6 in - -
    Front Axle - Wheel Lean - 18° Left/17° Right - -
    Front Axle - Height to Center - 26.4 in 23.5 in -
    Circle - Height - - 5.4 in -
    Drawbar - Thickness - - 0.5 in -
    Front-Top/Bottom Plate - Width - - 12 in -
    Front-Top/Bottom Plate - Thickness - - 0.87 in -

    Service Refill Capacities
    Transmission and Differential 23.5 gal (US) - - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) 5.8 gal (US) - - -
    Hydraulic System 33 gal (US) - - -
    Circle Drive 1.8 gal (US) - - -
    Cooling System 15.9 gal (US) - - -
    Fuel Tank 109.9 gal (US) - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

    Service Refill
    Fuel Capacity - 131 gal (US) 104 gal (US) -
    Cooling System - 18.5 gal (US) 15 gal (US) -
    DEF Tank - 4.2 gal (US) - -
    Hydraulic System - Total - 38.6 gal (US) 26.4 gal (US) -
    Hydraulic System - Tank - 18.5 gal (US) 16.9 gal (US) -
    Engine Oil - 9.5 gal (US) 7.9 gal (US) -
    Transmission - Differential - Final Drives - 34 gal (US) 18.5 gal (US) -
    Tandem Housing - Each - 34 gal (US) 20 gal (US) -
    Front Wheel Spindle Bearing Housing - 0.24 gal (US) 0.13 gal (US) -
    Circle Drive Housing - 2.6 gal (US) 1.8 gal (US) -
    Diesel Exhaust Fluid - - 5.8 gal (US) -
    Hydraulic System - - - 14.5 gal (US)
    Engine Crankcase - - - 7.9 gal (US)
    Circle Drive - - - 1.8 gal (US)
    Fuel Tank - - - 100 gal (US)
    Front Wheel Spindle Bearing - Each - - - 0.13 gal (US)

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse 8 Forward/6 Reverse -
    Transmission - Direct drive, power shift, countershaft APECS, Direct Drive, Powershift -
    Brakes - Dynamic Brake Torque per Wheel - 27069.27 lb/ft - -
    Brakes - Secondary - Oil-actuated, oil-disc Dual Circuit -
    Brakes - Service - Oil-actuated, oil disc Multiple Oil Disc -
    Brakes - Parking - Spring applied, hydraulically released Multiple Oil Disc -
    Brakes - Service - Surface Area - - 3565 in² -

    Hydraulic System
    Circuit Type - Electro-hydraulic load sensing, closed center Parallel -
    Pump Type - Variable piston Variable Piston -
    Maximum System Pressure - 3590 psi 3500 psi -
    Standby Pressure - 856 psi 885 psi -
    Pump Output* - 74 gal/min - -
    Note - *Pump output measured at 2,150 rpm. - -
    Pump Output - - 55.7 gal/min -
    Reservoir Tank Capacity - - 16.9 gal (US) -

    Ripper
    Ripping Depth - Maximum - 17.8 in 16.8 in -
    Shank Holder Spacing - Minimum - 17.5 in - -
    Shank Holder Spacing - Maximum - 20 in - -
    Ripper Shank Holders - 7 5 -
    Penetration Force - 30311 lb 20812 lb -
    Pry-Out Force - 43700 lb 27794 lb -
    Machine Length Increase, Beam Raised - 63.4 in 40.6 in -
    Ripper Shank Holder Spacing - - 21 in -

    Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Total - 84877 lb - -
    Gross Vehicle Weight - Base** - Total - 63528 lb - -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 52201 lb - -
    Gross Vehicle Weight - Typically Equipped - Total - 71454 lb - -
    Gross Vehicle Weight - Maximum Tested - Front Axle - 26125 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 19253 lb - -
    Gross Vehicle Weight - Maximum Tested - Rear Axle - 58753 lb - -
    Gross Vehicle Weight - Base** - Front Axle - 17932 lb - -
    Gross Vehicle Weight - Base** - Rear Axle - 45596 lb - -
    Note (1) - *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. - -
    Note (2) - **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. - -

    Dimensions (Approximate)
    Ground Clearance - Rear Axle - 15.6 in - -
    Length - Counterweight to Ripper - 474.4 in - -
    Length - Front Axle to Moldboard - 120.7 in - -
    Length - Front Axle to Mid Tandem - 290 in - -
    Height - Top of Cylinders - 121.6 in - -
    Width - Tire Center Lines - 106.4 in - -
    Width - Outside Rear Tires - 134.3 in - -
    Length - Between Tandem Axles - 72.5 in - -
    Height - Top of Cab - 146.4 in - -
    Width - Outside Front Tires - 134.3 in - -
    Height - Front Axle Center - 28.9 in - -
    Length - Front Tire to Rear of Machine - Including Tow Hitch - 417 in - -
    Height - Exhaust Stack - 140 in - -

    Standards
    Steering - ISO 5010:2007 ISO 5010 -
    Brakes - ISO 3450:2011 ISO 3450 -
    Sound - ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 ISO 6394; ISO 6395 -
    ROPS/FOPS - ISO 3471:2008/ISO 3449:2005 ISO 3471/ISO 3449 -
    Note (1) - The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - -
    Note (2) - The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
    Gear - Reverse 3rd-6th - 298 HP - -
    Gear - Forward 8th - 348 HP - -
    Gear - Forward 3rd - 298 HP - -
    Gear - Forward 6th - 320 HP - -
    Gear - Forward 5th - 311 HP - -
    Gear - Reverse 1st - 290 HP - -
    Gear - Reverse 2nd - 290 HP - -
    Gear - Forward 4th - 304 HP - -
    Gear - Forward 7th - 328 HP - -
    Gear - Forward 1st - 290 HP - -
    Gear - Forward 2nd - 290 HP - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
    Gear - Forward 4th - 309 HP - -
    Gear - Reverse 1st - 294 HP - -
    Gear - Forward 3rd - 302 HP - -
    Gear - Reverse 3rd-6th - 302 HP - -
    Gear - Reverse 2nd - 294 HP - -
    Gear - Forward 7th - 332 HP - -
    Gear - Forward 6th - 325 HP - -
    Gear - Forward 8th - 353 HP - -
    Gear - Forward 1st - 294 HP - -
    Gear - Forward 5th - 315 HP - -
    Gear - Forward 2nd - 294 HP - -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (1) - Tires: 23.5R25 Bridgestone VKT 2 Star - -
    Wheel Group - 19.5×25 MP (2) - Tires: 23.5R25 Bridgestone VKT 1 Star - -
    Wheel Group - 19.5×25 MP (3) - Tires: 23.5R25 Bridgestone VJT 1 Star - -
    Wheel Group - 19.5×25 MP (4) - Tires: 23.5R25 Michelin XHA 2 Star - -
    Wheel Group - 19.5×25 MP (5) - Tires: 23.5R25 Michelin XLDD 2 Star L5 - -

    Operating Specifications
    Note - Calculated with no slip and 23.5 R25 L-3 tires. - -
    Steering Range - Left/Right - 47.5° 50° -
    Forward - 6th - 16 mile/h 14.5 mile/h -
    Forward - 4th - 7.6 mile/h 6.9 mile/h -
    Forward - 5th - 11.8 mile/h 10.6 mile/h -
    Turning Radius - Outside Front Tires - 30.5 ft 25.59 ft -
    Forward - 7th - 22 mile/h 19.9 mile/h -
    Top Speed - Forward - 32.1 mile/h 29 mile/h -
    Forward - 3rd - 5.5 mile/h 5 mile/h -
    Reverse - 6th - 25.3 mile/h 23 mile/h -
    Reverse - 5th - 17.4 mile/h 15.7 mile/h -
    Reverse - 2nd - 4.1 mile/h 3.7 mile/h -
    Reverse - 3rd - 6 mile/h 5.4 mile/h -
    Forward - 8th - 32.1 mile/h 29 mile/h -
    Reverse - 1st - 2.2 mile/h 2 mile/h -
    Forward - 1st - 2.8 mile/h 2.5 mile/h -
    Top Speed - Reverse - 25.4 mile/h 23 mile/h -
    Forward - 2nd - 3.8 mile/h 3.4 mile/h -
    Reverse - 4th - 9.3 mile/h 8.4 mile/h -
    Articulation Angle - Left/Right - 20° 20° -

    Tandems
    Tandem Oscillation - Front Up - 15° 15° -
    Sidewall Thickness - Outer - 0.9 in 0.71 in -
    Sidewall Thickness - Inner - 0.9 in 0.63 in -
    Tandem Oscillation - Front Down - 25° 25° -
    Height - 25.5 in 19.9 in -
    Width - 9.3 in 7.9 in -
    Drive Chain Pitch - 2.5 in 2 in -
    Wheel Axle Spacing - 72.5 in 60 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 11-May -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in -
    Rear - Scarifying Depth, Maximum - - 16.8 in -
    Mid, V-Type - Working Width - - 46.6 in -
    Front, V-Type - Working Width - - 47.4 in -
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in -
    Mid, V-Type - Scarifier Shank Holders - - 11 -
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in -
    Rear - Working Width - - 84 in -
    Rear - Scarifier Shank Holders - - 9 -
    Rear - Scarifier Shank Holder Spacing - - 10.5 in -

    Dimensions
    Height - Top of Cab - - 130 in -
    Length - Counterweight to Ripper - - 399 in -
    Width - Outside Front Tires - - 98.9 in -
    Length - Front Axle to Mid Tandem - - 241 in -
    Length - Front Tire to Rear of Machine - - 351 in -
    Length - Front Axle to Moldboard - - 100 in -
    Length - Between Tandem Axles - - 60 in -
    Width - Outside Rear Tires - - 98.9 in -
    Width - Tire Center Lines - - 84.3 in -
    Height - Front Axle Center - - 23.5 in -
    Height - Exhaust Stack - - 128 in -
    Height - Top of Cylinders - - 120 in -
    Ground Clearance - Rear Axle - - 13.3 in -
    Basic Blade Width - - - 140 in
    Length of Machine* - - - 397.6 in
    Width - - - 97.6 in
    Note - - - *Typically equipped with push block and ripper.
    Maximum Height - - - 132 in

    Machine Weight
    Note - - - *Typically equipped with push block and ripper.
    All-Wheel Drive (AWD) Weight - - - 44613 lb
    Weight* - - - 42325 lb
    Add a Similar Product: