|
|
120 - 2019 - N Am, Global
|
|
Engine |
Base Power (1st Gear) - Net |
238 HP |
- |
- |
Engine Model |
Cat C13 |
Cat 7.1 |
Cat C9.3 |
Bore |
5.1 in |
4.1 in |
4.5 in |
Stroke |
6.2 in |
5.3 in |
5.9 in |
Speed at Rated Power |
1,850 rpm |
- |
- |
Note (3) |
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Power as declared per ISO 14396 |
- |
Standard Capability |
122 °F |
122 °F |
109 °F |
Note (2) |
Optimized VHP Plus is standard for the 14M3. |
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
Torque Rise |
41% |
- |
- |
Maximum Altitude - Full Power |
13900 ft |
- |
- |
Maximum Torque - VHP Plus |
1137 lb/ft |
- |
- |
Emissions |
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA |
U.S. EPA Tier 4 Final/EU Stage V |
Maximum Altitude - Full Power (Tier 3) |
14349 ft |
- |
- |
Maximum Altitude - Full Power (Tier 2) |
12049 ft |
- |
- |
Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." |
- |
Standard - Fan Speed - Minimum |
550 rpm |
- |
- |
Note (4) |
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) |
- |
- |
Note (5) |
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
- |
- |
Standard - Fan Speed - Maximum |
1,600 rpm |
- |
- |
Displacement |
763 in³ |
427.8 in³ |
567.5 in³ |
Number of Cylinders |
6 |
6 |
6 |
Derating Altitude |
- |
9842.5 ft |
- |
Maximum Torque - ISO 9249 |
- |
606 lb/ft |
- |
All-Wheel Drive Net Power Range (Tier 3) |
- |
130 HP |
- |
Net Power Range (Tier 3) |
- |
130 HP |
- |
Engine RPM |
- |
2,000 |
2,000 |
Maximum Torque - AWD On |
- |
611 lb/ft |
- |
Derating Altitude (AWD) |
- |
5499 ft |
- |
Torque Rise - ISO 9294 |
- |
42% |
44% |
Net Power - EEC 80/1269 |
- |
- |
250 HP |
Net Power - ISO 9249/SAE J1349 |
- |
- |
250 HP |
Weights |
Operating Weight - Typically Equipped |
57250 lb |
35067 lb |
20236 lb |
Gross Vehicle Weight - Base* - Total |
50980 lb |
- |
- |
Gross Vehicle Weight - Base* - Front Axle |
13994 lb |
- |
- |
Gross Vehicle Weight - Typically Equipped - Total |
57250 lb |
- |
- |
Gross Vehicle Weight - Typically Equipped - Rear Axle |
42005 lb |
- |
- |
Gross Vehicle Weight - Typically Equipped - Front Axle |
15245 lb |
- |
- |
Gross Vehicle Weight - Base* - Rear Axle |
36994 lb |
- |
- |
Note |
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
- |
- |
Moldboard |
Blade Width |
14 ft |
12 ft |
12 ft |
Arc Radius |
16.3 in |
16.3 in |
16.3 in |
Throat Clearance |
4.6 in |
4.1 in |
6.5 in |
Blade Width - With End Bits |
169 in |
- |
- |
Blade Height - With Cutting Edge |
24.9 in |
- |
- |
Blade Width - Without End Bits |
164 in |
- |
- |
Blade Height - Without Cutting Edge |
23 in |
- |
- |
Blade Height |
- |
24 in |
- |
End Bit |
- |
6 in |
6 in |
Cutting Edge |
- |
6 in |
6 in |
Blade Range |
Maximum Depth of Cut |
23.3 in |
30.5 in |
28.9 in |
Circle Centershift - Left |
25.6 in |
- |
- |
Maximum Lift Above Ground |
16.5 in |
16.1 in |
18.9 in |
Circle Centershift - Right |
20.5 in |
- |
- |
Blade Tip Range - Backward |
5° |
- |
- |
Maximum Shoulder Reach Outside of Tires - Right |
78.9 in |
- |
- |
Moldboard Sideshift - Right |
31.1 in |
- |
- |
Moldboard Sideshift - Left |
29.1 in |
- |
- |
Maximum Shoulder Reach Outside of Tires - Left |
73.6 in |
- |
- |
Blade Tip Range - Forward |
40° |
- |
- |
Blade Tip Range Forward |
- |
40 |
- |
Maximum Shoulder Reach Right |
- |
76 in |
- |
Moldboard Side Shift Right |
- |
26.1 in |
- |
Maximum Shoulder Reach Left |
- |
69.4 in |
- |
Moldboard Side Shift Left |
- |
20.1 in |
- |
Circle Center Shift Left |
- |
26 in |
- |
Blade Tip Range Backward |
- |
5 |
- |
Circle Center Shift Right |
- |
26 in |
- |
Frame |
Circle - Outer Diameter |
71.7 in |
- |
- |
Front Axle - Wheel Lean - Left/Right |
17.1° |
- |
- |
Front Axle - Total Oscillation per Side |
32° |
- |
- |
Service Refill Capacities |
Transmission and Differential |
23.5 gal (US) |
9 gal (US) |
- |
Diesel Exhaust Fluid Tank (Tier 4 Only) |
5.8 gal (US) |
5 gal (US) |
- |
Hydraulic System |
33 gal (US) |
25.6 gal (US) |
- |
Circle Drive |
1.8 gal (US) |
1.8 gal (US) |
- |
Cooling System |
15.9 gal (US) |
14 gal (US) |
- |
Fuel Tank |
109.9 gal (US) |
65 gal (US) |
- |
Engine Crankcase |
- |
4.8 gal (US) |
- |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
- |
- |
Note |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. |
- |
Machine Weight |
Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 |
- |
36731 lb |
- |
Note (1) |
- |
*Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
- |
Joystick Weight* Tier 4 |
- |
35358 lb |
- |
Joystick All-Wheel Drive (AWD) Weight* Tier 4 |
- |
36846 lb |
- |
Lever/Steering Wheel Weight* Tier 4 |
- |
35067 lb |
- |
Note |
- |
- |
*Typically equipped with push block and ripper. |
All-Wheel Drive (AWD) Weight |
- |
- |
44613 lb |
Weight* |
- |
- |
42325 lb |
Dimensions |
Maximum Height |
- |
136.4 in |
132 in |
Length of Machine* |
- |
387 in |
397.6 in |
Width All Wheel Drive (AWD) |
- |
2551 mm |
- |
Width |
- |
102 in |
97.6 in |
Note |
- |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
Basic Blade Width |
- |
12 ft |
140 in |
Service Refill |
Hydraulic System |
- |
- |
14.5 gal (US) |
Engine Crankcase |
- |
- |
7.9 gal (US) |
Circle Drive |
- |
- |
1.8 gal (US) |
Fuel Tank |
- |
- |
100 gal (US) |
Front Wheel Spindle Bearing - Each |
- |
- |
0.13 gal (US) |