CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    150 Motor Grader
    View Product
    140 GC Motor Grader
    View Product Remove
    120 - 2019 - N Am, Global
    View Product Remove

    Engine
    Net Power Range (Tier 4) 200 HP - -
    Engine Model Cat® C9.3 Cat 7.1 Cat 7.1
    Bore 4.5 in 4.1 in 4.1 in
    Stroke 5.9 in 5.3 in 5.3 in
    Speed at Rated Power 2,000 rpm - -
    Maximum Torque - VHP Plus 920 lb/ft - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA
    High Ambient - Fan Speed - Standard 1,400 rpm - -
    VHP Plus Range - Net - Metric 149-188 kW (202-255 hp) - -
    Standard Capability 109 °F 109 °F 122 °F
    VHP Plus Range - Net 149-188 kW (200-252 hp) - -
    Torque Rise 39% - -
    VHP Plus - Gear - Net Power - Reverse 1st 200 HP - -
    VHP Plus - Gear - Net Power - Forward 1st 200 HP - -
    VHP Plus - Gear - Net Power - Forward 8th 252 HP - -
    VHP Plus - Gear - Net Power - Forward 6th 241 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd 210 HP - -
    VHP Plus - Gear - Net Power - Forward 7th 247 HP - -
    VHP Plus - Gear - Net Power - Forward 5th 236 HP - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 220 HP - -
    VHP Plus - Gear - Net Power - Forward 4th 231 HP - -
    Base Power (1st Gear) - Net - Metric 202 HP - -
    VHP Plus - Gear - Net Power - Reverse 2nd 210 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd 220 HP - -
    Displacement 567.5 in³ 427.8 in³ 427.8 in³
    Number of Cylinders 6 6 6
    Derating Altitude 10000 ft 9842 ft 9842.5 ft
    High Ambient - Fan Speed - Maximum 1,550 rpm - -
    High Ambient - Fan Speed - Minimum 500 rpm - -
    High - Ambient Capability 122 °F 122 °F -
    Engine Power (ISO 14396) - 196 HP -
    Engine RPM - 2,200 2,000
    Maximum Torque - ISO 9249 - 616 lb/ft 606 lb/ft
    Torque Rise - ISO 9294 - 40% 42%
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture."
    Note (2) - Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (3) - Power as declared per ISO 14396 Power as declared per ISO 14396
    Engine Power AWD (ISO 14396) - 196 HP -
    All-Wheel Drive Net Power Range (Tier 3) - - 130 HP
    Net Power Range (Tier 3) - - 130 HP
    Maximum Torque - AWD On - - 611 lb/ft
    Derating Altitude (AWD) - - 5499 ft

    Weights
    Operating Weight - Typically Equipped 43950 lb 38912 lb 35067 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - -
    Operating Weight - Typically Equipped - Front Axle 12549 lb - -
    Operating Weight - Typically Equipped - Rear Axle 31401 lb - -
    Gross Vehicle Weight - Base - Front Axle 9601 lb - -
    Gross Vehicle Weight - Base - Rear Axle 28590 lb - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - -
    Operating Weight - Typically Equipped - Total 43950 lb - -
    Gross Vehicle Weight - Base - Total 38191 lb - -
    Note - * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. -

    Moldboard
    Blade Width 12 ft 12 ft 12 ft
    Moldboard - Height 24 in - -
    Moldboard - Thickness 0.87 in - -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 4.4 in 4.1 in
    Cutting Edge Width 6 in 6 in -
    Cutting Edge Thickness 0.6 in - -
    End Bit - Width 6 in - -
    End Bit - Thickness 0.6 in - -
    Blade Pull - Base GVW 25732 lb - -
    Blade Pull - Maximum GVW 34262 lb - -
    Blade Down Pressure - Base GVW 16480 lb - -
    Blade Down Pressure - Maximum GVW 29308 lb - -
    Moldboard - Blade Width 12 ft - -
    Blade Height - 24 in 24 in
    End Bit - 6 in 6 in
    Cutting Edge - - 6 in

    Operating Specifications
    Top Speed - Forward 29 mile/h - -
    Top Speed - Reverse 23 mile/h - -
    Turning Radius - Outside Front Tires 25.59 ft - -
    Steering Range - Left/Right 50° - -
    Articulation Angle - Left/Right 20° - -
    Forward - 1st 2.5 mile/h - -
    Forward - 2nd 3.4 mile/h - -
    Forward - 3rd 5 mile/h - -
    Forward - 4th 6.9 mile/h - -
    Forward - 5th 10.6 mile/h - -
    Forward - 6th 14.5 mile/h - -
    Forward - 7th 19.9 mile/h - -
    Forward - 8th 29 mile/h - -
    Reverse - 1st 2 mile/h - -
    Reverse - 2nd 3.7 mile/h - -
    Reverse - 3rd 5.4 mile/h - -
    Reverse - 4th 8.4 mile/h - -
    Reverse - 5th 15.7 mile/h - -
    Reverse - 6th 23 mile/h - -

    Service Refill
    Fuel Capacity 104 gal (US) - -
    Cooling System 15 gal (US) - -
    Hydraulic System - Total 26.4 gal (US) - -
    Hydraulic System - Tank 16.9 gal (US) - -
    Transmission - Differential - Final Drives 18.5 gal (US) - -
    Diesel Exhaust Fluid 5.8 gal (US) - -
    Engine Oil 7.9 gal (US) - -
    Tandem Housing - Each 20 gal (US) - -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - -
    Circle Drive Housing 1.8 gal (US) - -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - -
    Transmission APECS, Direct Drive, Powershift - -
    Brakes - Service Multiple Oil Disc - -
    Brakes - Service - Surface Area 3565 in² - -
    Brakes - Parking Multiple Oil Disc - -
    Brakes - Secondary Dual Circuit - -

    Hydraulic System
    Circuit Type Parallel - -
    Pump Type Variable Piston - -
    Pump Output 55.7 gal/min - -
    Maximum System Pressure 3500 psi - -
    Reservoir Tank Capacity 16.9 gal (US) - -
    Standby Pressure 885 psi - -

    Frame
    Drawbar - Width 3 in - -
    Circle - Diameter 60.2 in - -
    Circle - Blade Beam Thickness 1.6 in - -
    Drawbar - Height 6 in - -
    Front Frame Structure - Width 12 in - -
    Front Frame Structure - Height 12.6 in - -
    Circle - Height 5.4 in - -
    Drawbar - Thickness 0.5 in - -
    Front-Top/Bottom Plate - Width 12 in - -
    Front-Top/Bottom Plate - Thickness 0.87 in - -
    Front Axle - Height to Center 23.5 in - -
    Front Axle - Wheel Lean - Left/Right 18° - -
    Front Axle - Total Oscillation per Side 32° - -

    Blade Range
    Circle Centershift - Right 28.7 in - -
    Circle Centershift - Left 27.4 in - -
    Moldboard Sideshift - Right 26 in - -
    Moldboard Sideshift - Left 20.1 in - -
    Maximum Blade Position Angle 90° - -
    Blade Tip Range - Forward 40° - -
    Blade Tip Range - Backward 5° - -
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in - -
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in - -
    Maximum Lift Above Ground 18.9 in 18.7 in 16.1 in
    Maximum Depth of Cut 28.1 in 28.1 in 30.5 in
    Circle Center Shift Left - 29.6 in 26 in
    Circle Center Shift Right - 28.7 in 26 in
    Maximum Shoulder Reach Left - 74.3 in 69.4 in
    Maximum Shoulder Reach Right - 71.3 in 76 in
    Moldboard Side Shift Left - 25.6 in 20.1 in
    Moldboard Side Shift Right - 20.7 in 26.1 in
    Blade Tip Range Backward - 5 5
    Blade Tip Range Forward - 40 40

    Ripper
    Ripper Shank Holder Spacing 21 in - -
    Ripping Depth - Maximum 16.8 in - -
    Ripper Shank Holders 5 - -
    Penetration Force 20812 lb - -
    Pry-Out Force 27794 lb - -
    Machine Length Increase, Beam Raised 40.6 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - -
    Rear - Scarifying Depth, Maximum 16.8 in - -
    Mid, V-Type - Working Width 46.6 in - -
    Front, V-Type - Working Width 47.4 in - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - -
    Mid, V-Type - Scarifier Shank Holders 11 - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - -
    Rear - Working Width 84 in - -
    Rear - Scarifier Shank Holders 9 - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - -

    Standards
    Steering ISO 5010 - -
    ROPS/FOPS ISO 3471/ISO 3449 - -
    Brakes ISO 3450 - -
    Sound ISO 6394; ISO 6395 - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - -
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes.

    Tandems
    Height 19.9 in - -
    Width 7.9 in - -
    Sidewall Thickness - Inner 0.63 in - -
    Sidewall Thickness - Outer 0.71 in - -
    Drive Chain Pitch 2 in - -
    Wheel Axle Spacing 60 in - -
    Tandem Oscillation - Front Up 15° - -
    Tandem Oscillation - Front Down 25° - -

    Dimensions
    Height - Top of Cab 130 in - -
    Length - Counterweight to Ripper 399 in - -
    Width - Outside Front Tires 98.9 in - -
    Length - Front Axle to Mid Tandem 241 in - -
    Length - Front Tire to Rear of Machine 351 in - -
    Length - Front Axle to Moldboard 100 in - -
    Length - Between Tandem Axles 60 in - -
    Width - Outside Rear Tires 98.9 in - -
    Width - Tire Center Lines 84.3 in - -
    Height - Front Axle Center 23.5 in - -
    Height - Exhaust Stack 128 in - -
    Height - Top of Cylinders 120 in - -
    Ground Clearance - Rear Axle 13.3 in - -
    Width All Wheel Drive (AWD) - 99.3 in 2551 mm
    Length of Machine* - 406.7 in 387 in
    Maximum Height - 132.4 in 136.4 in
    Width - 95.6 in 102 in
    Note - *Typically equipped with push block and ripper. *Typically equipped with push block and ripper.
    Basic Blade Width - - 12 ft

    Service Refill Capacities
    Fuel Tank - 78 gal (US) 65 gal (US)
    Circle Drive with Slip Clutch - 2 gal (US) -
    Circle Drive without Slip Clutch - 0.5 gal (US) -
    Cooling System - 40 l 14 gal (US)
    Engine Crankcase - 5.5 gal (US) 4.8 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 4.2 gal (US) 5 gal (US)
    Hydraulic System - 11.9 gal (US) 25.6 gal (US)
    Transmission - 4.8 gal (US) -
    Transmission and Differential - - 9 gal (US)
    Circle Drive - - 1.8 gal (US)

    Weight
    Weight (Tier 4 Final)** - 40488 lb -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** - 42119 lb -
    All-Wheel Drive Weight (AWD) (Stage V)* - 40543 lb -
    Weight (Stage V)* - 38912 lb -

    Machine Weight
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - 36731 lb
    Note (1) - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids.
    Joystick Weight* Tier 4 - - 35358 lb
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - 36846 lb
    Lever/Steering Wheel Weight* Tier 4 - - 35067 lb
    Add a Similar Product: