Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
-
-
Note (2)
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.
-
-
Moldboard
Blade Width
12 ft
16 ft
-
Arc Radius
16.3 in
16.3 in
-
Blade Height
24 in
-
-
Cutting Edge Width
6 in
8 in
-
End Bit
6 in
-
-
Throat Clearance
4.4 in
5 in
-
Note
-
*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
-
Thickness
-
1 in
-
End Bit - Width
-
6 in
-
Blade Pull* - Base GVW
-
41039 lb
-
Cutting Edge Thickness
-
1 in
-
Down Force - Maximum GVW
-
43861 lb
-
Height
-
31 in
-
Width
-
16 ft
-
Down Force - Base GVW
-
30743 lb
-
Blade Pull* - Maximum GVW
-
52878 lb
-
End Bit - Thickness
-
0.75 in
-
Air Conditioning System
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
Gross Vehicle Weight - Typically Equipped - Rear Axle
-
52201 lb
-
Gross Vehicle Weight - Typically Equipped - Total
-
71454 lb
-
Gross Vehicle Weight - Maximum Tested - Front Axle
-
26125 lb
-
Gross Vehicle Weight - Typically Equipped - Front Axle
-
19253 lb
-
Gross Vehicle Weight - Maximum Tested - Rear Axle
-
58753 lb
-
Gross Vehicle Weight - Base** - Front Axle
-
17932 lb
-
Gross Vehicle Weight - Base** - Rear Axle
-
45596 lb
-
Note (1)
-
*For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
-
Note (2)
-
**Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.
-
Dimensions (Approximate)
Ground Clearance - Rear Axle
-
15.6 in
-
Length - Counterweight to Ripper
-
474.4 in
-
Length - Front Axle to Moldboard
-
120.7 in
-
Length - Front Axle to Mid Tandem
-
290 in
-
Height - Top of Cylinders
-
121.6 in
-
Width - Tire Center Lines
-
106.4 in
-
Width - Outside Rear Tires
-
134.3 in
-
Length - Between Tandem Axles
-
72.5 in
-
Height - Top of Cab
-
146.4 in
-
Width - Outside Front Tires
-
134.3 in
-
Height - Front Axle Center
-
28.9 in
-
Length - Front Tire to Rear of Machine - Including Tow Hitch
-
417 in
-
Height - Exhaust Stack
-
140 in
-
Standards
Steering
-
ISO 5010:2007
-
Brakes
-
ISO 3450:2011
-
Sound
-
ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
-
ROPS/FOPS
-
ISO 3471:2008/ISO 3449:2005
-
Note (1)
-
The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
-
Note (2)
-
The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the
-
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net