CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 GC Motor Grader
    View Product
    120 - 2019 - N Am, Global
    View Product Remove
    150 Motor Grader
    View Product Remove

    Engine
    Engine Power (ISO 14396) 196 HP - -
    Bore 4.1 in 4.1 in 4.5 in
    Derating Altitude 9842 ft 9842.5 ft 10000 ft
    Displacement 427.8 in³ 427.8 in³ 567.5 in³
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat 7.1 Cat 7.1 Cat® C9.3
    Engine RPM 2,200 2,000 -
    Standard Capability 109 °F 122 °F 109 °F
    High - Ambient Capability 122 °F - 122 °F
    Maximum Torque - ISO 9249 616 lb/ft 606 lb/ft -
    Stroke 5.3 in 5.3 in 5.9 in
    Torque Rise - ISO 9294 40% 42% -
    Number of Cylinders 6 6 6
    Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." -
    Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Note (3) Power as declared per ISO 14396 Power as declared per ISO 14396 -
    Engine Power AWD (ISO 14396) 196 HP - -
    All-Wheel Drive Net Power Range (Tier 3) - 130 HP -
    Net Power Range (Tier 3) - 130 HP -
    Maximum Torque - AWD On - 611 lb/ft -
    Derating Altitude (AWD) - 5499 ft -
    Net Power Range (Tier 4) - - 200 HP
    Speed at Rated Power - - 2,000 rpm
    Maximum Torque - VHP Plus - - 920 lb/ft
    High Ambient - Fan Speed - Standard - - 1,400 rpm
    VHP Plus Range - Net - Metric - - 149-188 kW (202-255 hp)
    VHP Plus Range - Net - - 149-188 kW (200-252 hp)
    Torque Rise - - 39%
    VHP Plus - Gear - Net Power - Reverse 1st - - 200 HP
    VHP Plus - Gear - Net Power - Forward 1st - - 200 HP
    VHP Plus - Gear - Net Power - Forward 8th - - 252 HP
    VHP Plus - Gear - Net Power - Forward 6th - - 241 HP
    VHP Plus - Gear - Net Power - Forward 2nd - - 210 HP
    VHP Plus - Gear - Net Power - Forward 7th - - 247 HP
    VHP Plus - Gear - Net Power - Forward 5th - - 236 HP
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 220 HP
    VHP Plus - Gear - Net Power - Forward 4th - - 231 HP
    Base Power (1st Gear) - Net - Metric - - 202 HP
    VHP Plus - Gear - Net Power - Reverse 2nd - - 210 HP
    VHP Plus - Gear - Net Power - Forward 3rd - - 220 HP
    High Ambient - Fan Speed - Maximum - - 1,550 rpm
    High Ambient - Fan Speed - Minimum - - 500 rpm

    Weights
    Operating Weight - Typically Equipped 38912 lb 35067 lb 43950 lb
    Note * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. - -
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb
    Operating Weight - Typically Equipped - Front Axle - - 12549 lb
    Operating Weight - Typically Equipped - Rear Axle - - 31401 lb
    Gross Vehicle Weight - Base - Front Axle - - 9601 lb
    Gross Vehicle Weight - Base - Rear Axle - - 28590 lb
    Gross Vehicle Weight - Maximum - Total - - 55144 lb
    Operating Weight - Typically Equipped - Total - - 43950 lb
    Gross Vehicle Weight - Base - Total - - 38191 lb

    Moldboard
    Blade Width 12 ft 12 ft 12 ft
    Arc Radius 16.3 in 16.3 in 16.3 in
    Blade Height 24 in 24 in -
    Cutting Edge Width 6 in - 6 in
    End Bit 6 in 6 in -
    Throat Clearance 4.4 in 4.1 in 6.5 in
    Cutting Edge - 6 in -
    Moldboard - Height - - 24 in
    Moldboard - Thickness - - 0.87 in
    Cutting Edge Thickness - - 0.6 in
    End Bit - Width - - 6 in
    End Bit - Thickness - - 0.6 in
    Blade Pull - Base GVW - - 25732 lb
    Blade Pull - Maximum GVW - - 34262 lb
    Blade Down Pressure - Base GVW - - 16480 lb
    Blade Down Pressure - Maximum GVW - - 29308 lb
    Moldboard - Blade Width - - 12 ft

    Air Conditioning System
    Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Dimensions
    Width All Wheel Drive (AWD) 99.3 in 2551 mm -
    Length of Machine* 406.7 in 387 in -
    Maximum Height 132.4 in 136.4 in -
    Width 95.6 in 102 in -
    Note *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. -
    Basic Blade Width - 12 ft -
    Height - Top of Cab - - 130 in
    Length - Counterweight to Ripper - - 399 in
    Width - Outside Front Tires - - 98.9 in
    Length - Front Axle to Mid Tandem - - 241 in
    Length - Front Tire to Rear of Machine - - 351 in
    Length - Front Axle to Moldboard - - 100 in
    Length - Between Tandem Axles - - 60 in
    Width - Outside Rear Tires - - 98.9 in
    Width - Tire Center Lines - - 84.3 in
    Height - Front Axle Center - - 23.5 in
    Height - Exhaust Stack - - 128 in
    Height - Top of Cylinders - - 120 in
    Ground Clearance - Rear Axle - - 13.3 in

    Blade Range
    Circle Center Shift Left 29.6 in 26 in -
    Circle Center Shift Right 28.7 in 26 in -
    Maximum Depth of Cut 28.1 in 30.5 in 28.1 in
    Maximum Lift Above Ground 18.7 in 16.1 in 18.9 in
    Maximum Shoulder Reach Left 74.3 in 69.4 in -
    Maximum Shoulder Reach Right 71.3 in 76 in -
    Moldboard Side Shift Left 25.6 in 20.1 in -
    Moldboard Side Shift Right 20.7 in 26.1 in -
    Blade Tip Range Backward 5 5 -
    Blade Tip Range Forward 40 40 -
    Circle Centershift - Right - - 28.7 in
    Circle Centershift - Left - - 27.4 in
    Moldboard Sideshift - Right - - 26 in
    Moldboard Sideshift - Left - - 20.1 in
    Maximum Blade Position Angle - - 90°
    Blade Tip Range - Forward - - 40°
    Blade Tip Range - Backward - - 5°
    Maximum Shoulder Reach Outside of Tires - Right - - 77.9 in
    Maximum Shoulder Reach Outside of Tires - Left - - 70.5 in

    Service Refill Capacities
    Fuel Tank 78 gal (US) 65 gal (US) -
    Circle Drive with Slip Clutch 2 gal (US) - -
    Circle Drive without Slip Clutch 0.5 gal (US) - -
    Cooling System 40 l 14 gal (US) -
    Engine Crankcase 5.5 gal (US) 4.8 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) 4.2 gal (US) 5 gal (US) -
    Hydraulic System 11.9 gal (US) 25.6 gal (US) -
    Transmission 4.8 gal (US) - -
    Transmission and Differential - 9 gal (US) -
    Circle Drive - 1.8 gal (US) -

    Weight
    Weight (Tier 4 Final)** 40488 lb - -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** 42119 lb - -
    All-Wheel Drive Weight (AWD) (Stage V)* 40543 lb - -
    Weight (Stage V)* 38912 lb - -

    Machine Weight
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731 lb -
    Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. -
    Joystick Weight* Tier 4 - 35358 lb -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846 lb -
    Lever/Steering Wheel Weight* Tier 4 - 35067 lb -

    Operating Specifications
    Top Speed - Forward - - 29 mile/h
    Top Speed - Reverse - - 23 mile/h
    Turning Radius - Outside Front Tires - - 25.59 ft
    Steering Range - Left/Right - - 50°
    Articulation Angle - Left/Right - - 20°
    Forward - 1st - - 2.5 mile/h
    Forward - 2nd - - 3.4 mile/h
    Forward - 3rd - - 5 mile/h
    Forward - 4th - - 6.9 mile/h
    Forward - 5th - - 10.6 mile/h
    Forward - 6th - - 14.5 mile/h
    Forward - 7th - - 19.9 mile/h
    Forward - 8th - - 29 mile/h
    Reverse - 1st - - 2 mile/h
    Reverse - 2nd - - 3.7 mile/h
    Reverse - 3rd - - 5.4 mile/h
    Reverse - 4th - - 8.4 mile/h
    Reverse - 5th - - 15.7 mile/h
    Reverse - 6th - - 23 mile/h

    Service Refill
    Fuel Capacity - - 104 gal (US)
    Cooling System - - 15 gal (US)
    Hydraulic System - Total - - 26.4 gal (US)
    Hydraulic System - Tank - - 16.9 gal (US)
    Transmission - Differential - Final Drives - - 18.5 gal (US)
    Diesel Exhaust Fluid - - 5.8 gal (US)
    Engine Oil - - 7.9 gal (US)
    Tandem Housing - Each - - 20 gal (US)
    Front Wheel Spindle Bearing Housing - - 0.13 gal (US)
    Circle Drive Housing - - 1.8 gal (US)

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse
    Transmission - - APECS, Direct Drive, Powershift
    Brakes - Service - - Multiple Oil Disc
    Brakes - Service - Surface Area - - 3565 in²
    Brakes - Parking - - Multiple Oil Disc
    Brakes - Secondary - - Dual Circuit

    Hydraulic System
    Circuit Type - - Parallel
    Pump Type - - Variable Piston
    Pump Output - - 55.7 gal/min
    Maximum System Pressure - - 3500 psi
    Reservoir Tank Capacity - - 16.9 gal (US)
    Standby Pressure - - 885 psi

    Frame
    Drawbar - Width - - 3 in
    Circle - Diameter - - 60.2 in
    Circle - Blade Beam Thickness - - 1.6 in
    Drawbar - Height - - 6 in
    Front Frame Structure - Width - - 12 in
    Front Frame Structure - Height - - 12.6 in
    Circle - Height - - 5.4 in
    Drawbar - Thickness - - 0.5 in
    Front-Top/Bottom Plate - Width - - 12 in
    Front-Top/Bottom Plate - Thickness - - 0.87 in
    Front Axle - Height to Center - - 23.5 in
    Front Axle - Wheel Lean - Left/Right - - 18°
    Front Axle - Total Oscillation per Side - - 32°

    Ripper
    Ripper Shank Holder Spacing - - 21 in
    Ripping Depth - Maximum - - 16.8 in
    Ripper Shank Holders - - 5
    Penetration Force - - 20812 lb
    Pry-Out Force - - 27794 lb
    Machine Length Increase, Beam Raised - - 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 11-May
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in
    Rear - Scarifying Depth, Maximum - - 16.8 in
    Mid, V-Type - Working Width - - 46.6 in
    Front, V-Type - Working Width - - 47.4 in
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in
    Mid, V-Type - Scarifier Shank Holders - - 11
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in
    Rear - Working Width - - 84 in
    Rear - Scarifier Shank Holders - - 9
    Rear - Scarifier Shank Holder Spacing - - 10.5 in

    Standards
    Steering - - ISO 5010
    ROPS/FOPS - - ISO 3471/ISO 3449
    Brakes - - ISO 3450
    Sound - - ISO 6394; ISO 6395

    Tandems
    Height - - 19.9 in
    Width - - 7.9 in
    Sidewall Thickness - Inner - - 0.63 in
    Sidewall Thickness - Outer - - 0.71 in
    Drive Chain Pitch - - 2 in
    Wheel Axle Spacing - - 60 in
    Tandem Oscillation - Front Up - - 15°
    Tandem Oscillation - Front Down - - 25°
    Add a Similar Product: