Compare Equipment Go Back

140 GC Motor Grader
120 - 2019 - N Am, Global

Engine

Engine Power (ISO 14396) 196 HP - -
Bore 4.1 in 4.1 in -
Derating Altitude 9842 ft 9842.5 ft -
Displacement 427.8 in³ 427.8 in³ -
Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA -
Engine Model Cat 7.1 Cat 7.1 -
Engine RPM 2,200 2,000 -
Standard Capability 109 °F 122 °F -
High - Ambient Capability 122 °F - -
Maximum Torque - ISO 9249 616 lb/ft 606 lb/ft -
Stroke 5.3 in 5.3 in -
Torque Rise - ISO 9294 40% 42% -
Number of Cylinders 6 6 -
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." -
Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
Note (3) Power as declared per ISO 14396 Power as declared per ISO 14396 -
Engine Power AWD (ISO 14396) 196 HP - -
All-Wheel Drive Net Power Range (Tier 3) - 130 HP -
Net Power Range (Tier 3) - 130 HP -
Maximum Torque - AWD On - 611 lb/ft -
Derating Altitude (AWD) - 5499 ft -

Weights

Operating Weight - Typically Equipped 38912 lb 16271 lb -
Note * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. - -

Moldboard

Blade Width 12 ft 12 ft -
Arc Radius 16.3 in 16.3 in -
Blade Height 24 in 24 in -
Cutting Edge Width 6 in - -
End Bit 6 in 6 in -
Throat Clearance 4.4 in 4.1 in -
Cutting Edge - 6 in -

Air Conditioning System

Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. -

Dimensions

Width All Wheel Drive (AWD) 99.3 in 2551 mm -
Length of Machine* 406.7 in 387 in -
Maximum Height 132.4 in 136.4 in -
Width 95.6 in 102 in -
Note *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. -
Basic Blade Width - 12 ft -

Blade Range

Circle Center Shift Left 29.6 in 26 in -
Circle Center Shift Right 28.7 in 26 in -
Maximum Depth of Cut 28.1 in 30.5 in -
Maximum Lift Above Ground 18.7 in 16.1 in -
Maximum Shoulder Reach Left 74.3 in 69.4 in -
Maximum Shoulder Reach Right 71.3 in 76 in -
Moldboard Side Shift Left 25.6 in 20.1 in -
Moldboard Side Shift Right 20.7 in 26.1 in -
Blade Tip Range Backward 5 5 -
Blade Tip Range Forward 40 40 -

Service Refill Capacities

Fuel Tank 78 gal (US) 65 gal (US) -
Circle Drive with Slip Clutch 2 gal (US) - -
Circle Drive without Slip Clutch 0.5 gal (US) - -
Cooling System 40 l 14 gal (US) -
Engine Crankcase 5.5 gal (US) 4.8 gal (US) -
Diesel Exhaust Fluid Tank (Tier 4 Only) 4.2 gal (US) 5 gal (US) -
Hydraulic System 11.9 gal (US) 25.6 gal (US) -
Transmission 4.8 gal (US) - -
Transmission and Differential - 9 gal (US) -
Circle Drive - 1.8 gal (US) -

Weight

Weight (Tier 4 Final)** 40488 lb - -
All-wheel Drive Weight (AWD) (Tier 4 Final)** 42119 lb - -
All-Wheel Drive Weight (AWD) (Stage V)* 40543 lb - -
Weight (Stage V)* 38912 lb - -

Machine Weight

Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731 lb -
Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. -
Joystick Weight* Tier 4 - 35358 lb -
Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846 lb -
Lever/Steering Wheel Weight* Tier 4 - 35067 lb -
Add a Similar Product: