CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    16 Motor Grader
    View Product Remove
    140 GC Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP - -
    Net Power - ISO 9249/SAE J1349 250 HP - -
    Standard Capability 109 °F - 109 °F
    Engine RPM 2,000 - 2,200
    Engine Model Cat C9.3 Cat® C13 Cat 7.1
    Bore 4.5 in 5.1 in 4.1 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 4 Final/EU Stage V
    Displacement 567.5 in³ 763 in³ 427.8 in³
    Stroke 5.9 in 6.2 in 5.3 in
    Number of Cylinders 6 6 6
    Torque Rise - ISO 9294 44% - 40%
    Base Power (1st Gear) - Net - 290 HP -
    Speed at Rated Power - 2,000 rpm -
    Optimized VHP Range - Net - 216-259 kW (290-348 hp) -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 12176 ft -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 1270 lb/ft -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) - 1306 lb/ft -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 1270 lb/ft -
    Emissions (2) - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) - 43% -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 39% -
    Standard - Ambient Capability - 122 °F -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 12973 ft -
    VHP Range - Net - Metric - 216-259 kW (294-353 hp) -
    Base Power (1st Gear) - Net - Metric - 294 HP -
    Standard - Fan Speed - Minimum - 550 rpm -
    Standard - Fan Speed - Maximum - 1,450 rpm -
    Emissions (3) - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 39% -
    Emissions (1) - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) -
    VHP Range - Net - 216-259 kW (290-348 hp) -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) - 12500 ft -
    Engine Power (ISO 14396) - - 196 HP
    Derating Altitude - - 9842 ft
    High - Ambient Capability - - 122 °F
    Maximum Torque - ISO 9249 - - 616 lb/ft
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
    Note (2) - - Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (3) - - Power as declared per ISO 14396
    Engine Power AWD (ISO 14396) - - 196 HP

    Weights
    Operating Weight - Typically Equipped 20236 lb 71454 lb 38912 lb
    Note - - * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.

    Moldboard
    Blade Width 12 ft 16 ft 12 ft
    Cutting Edge 6 in - -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 5 in 4.4 in
    End Bit 6 in - 6 in
    Note - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. -
    Thickness - 1 in -
    End Bit - Width - 6 in -
    Blade Pull* - Base GVW - 41039 lb -
    Cutting Edge Width - 8 in 6 in
    Cutting Edge Thickness - 1 in -
    Down Force - Maximum GVW - 43861 lb -
    Height - 31 in -
    Width - 16 ft -
    Down Force - Base GVW - 30743 lb -
    Blade Pull* - Maximum GVW - 52878 lb -
    End Bit - Thickness - 0.75 in -
    Blade Height - - 24 in

    Dimensions
    Basic Blade Width 140 in - -
    Length of Machine* 397.6 in - 406.7 in
    Width 97.6 in - 95.6 in
    Note *Typically equipped with push block and ripper. - *Typically equipped with push block and ripper.
    Maximum Height 132 in - 132.4 in
    Width All Wheel Drive (AWD) - - 99.3 in

    Service Refill
    Hydraulic System 14.5 gal (US) - -
    Engine Crankcase 7.9 gal (US) - -
    Circle Drive 1.8 gal (US) - -
    Fuel Tank 100 gal (US) - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - -
    Fuel Capacity - 131 gal (US) -
    Cooling System - 18.5 gal (US) -
    DEF Tank - 4.2 gal (US) -
    Hydraulic System - Total - 38.6 gal (US) -
    Hydraulic System - Tank - 18.5 gal (US) -
    Engine Oil - 9.5 gal (US) -
    Transmission - Differential - Final Drives - 34 gal (US) -
    Tandem Housing - Each - 34 gal (US) -
    Front Wheel Spindle Bearing Housing - 0.24 gal (US) -
    Circle Drive Housing - 2.6 gal (US) -

    Machine Weight
    Note *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight 44613 lb - -
    Weight* 42325 lb - -

    Blade Range
    Maximum Lift Above Ground 18.9 in 15.7 in 18.7 in
    Maximum Depth of Cut 28.9 in 18.5 in 28.1 in
    Maximum Blade Position Angle - 65° -
    Maximum Shoulder Reach Outside of Tires - Right - 91 in -
    Moldboard Sideshift - Left - 29.1 in -
    Circle Centershift - Right - 22 in -
    Circle Centershift - Left - 27.2 in -
    Moldboard Sideshift - Right - 31.1 in -
    Maximum Shoulder Reach Outside of Tires - Left - 91 in -
    Blade Tip Range - Forward - 40° -
    Blade Tip Range - Backward - 5° -
    Circle Center Shift Left - - 29.6 in
    Circle Center Shift Right - - 28.7 in
    Maximum Shoulder Reach Left - - 74.3 in
    Maximum Shoulder Reach Right - - 71.3 in
    Moldboard Side Shift Left - - 25.6 in
    Moldboard Side Shift Right - - 20.7 in
    Blade Tip Range Backward - - 5
    Blade Tip Range Forward - - 40

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse -
    Transmission - Direct drive, power shift, countershaft -
    Brakes - Dynamic Brake Torque per Wheel - 27069.27 lb/ft -
    Brakes - Secondary - Oil-actuated, oil-disc -
    Brakes - Service - Oil-actuated, oil disc -
    Brakes - Parking - Spring applied, hydraulically released -

    Hydraulic System
    Circuit Type - Electro-hydraulic load sensing, closed center -
    Pump Type - Variable piston -
    Maximum System Pressure - 3590 psi -
    Standby Pressure - 856 psi -
    Pump Output* - 74 gal/min -
    Note - *Pump output measured at 2,150 rpm. -

    Ripper
    Ripping Depth - Maximum - 17.8 in -
    Shank Holder Spacing - Minimum - 17.5 in -
    Shank Holder Spacing - Maximum - 20 in -
    Ripper Shank Holders - 7 -
    Penetration Force - 30311 lb -
    Pry-Out Force - 43700 lb -
    Machine Length Increase, Beam Raised - 63.4 in -

    Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Total - 84877 lb -
    Gross Vehicle Weight - Base** - Total - 63528 lb -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 52201 lb -
    Gross Vehicle Weight - Typically Equipped - Total - 71454 lb -
    Gross Vehicle Weight - Maximum Tested - Front Axle - 26125 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 19253 lb -
    Gross Vehicle Weight - Maximum Tested - Rear Axle - 58753 lb -
    Gross Vehicle Weight - Base** - Front Axle - 17932 lb -
    Gross Vehicle Weight - Base** - Rear Axle - 45596 lb -
    Note (1) - *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. -
    Note (2) - **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. -

    Dimensions (Approximate)
    Ground Clearance - Rear Axle - 15.6 in -
    Length - Counterweight to Ripper - 474.4 in -
    Length - Front Axle to Moldboard - 120.7 in -
    Length - Front Axle to Mid Tandem - 290 in -
    Height - Top of Cylinders - 121.6 in -
    Width - Tire Center Lines - 106.4 in -
    Width - Outside Rear Tires - 134.3 in -
    Length - Between Tandem Axles - 72.5 in -
    Height - Top of Cab - 146.4 in -
    Width - Outside Front Tires - 134.3 in -
    Height - Front Axle Center - 28.9 in -
    Length - Front Tire to Rear of Machine - Including Tow Hitch - 417 in -
    Height - Exhaust Stack - 140 in -

    Standards
    Steering - ISO 5010:2007 -
    Brakes - ISO 3450:2011 -
    Sound - ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 -
    ROPS/FOPS - ISO 3471:2008/ISO 3449:2005 -
    Note (1) - The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the -
    Note (2) - The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
    Gear - Reverse 3rd-6th - 298 HP -
    Gear - Forward 8th - 348 HP -
    Gear - Forward 3rd - 298 HP -
    Gear - Forward 6th - 320 HP -
    Gear - Forward 5th - 311 HP -
    Gear - Reverse 1st - 290 HP -
    Gear - Reverse 2nd - 290 HP -
    Gear - Forward 4th - 304 HP -
    Gear - Forward 7th - 328 HP -
    Gear - Forward 1st - 290 HP -
    Gear - Forward 2nd - 290 HP -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
    Gear - Forward 4th - 309 HP -
    Gear - Reverse 1st - 294 HP -
    Gear - Forward 3rd - 302 HP -
    Gear - Reverse 3rd-6th - 302 HP -
    Gear - Reverse 2nd - 294 HP -
    Gear - Forward 7th - 332 HP -
    Gear - Forward 6th - 325 HP -
    Gear - Forward 8th - 353 HP -
    Gear - Forward 1st - 294 HP -
    Gear - Forward 5th - 315 HP -
    Gear - Forward 2nd - 294 HP -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (1) - Tires: 23.5R25 Bridgestone VKT 2 Star -
    Wheel Group - 19.5×25 MP (2) - Tires: 23.5R25 Bridgestone VKT 1 Star -
    Wheel Group - 19.5×25 MP (3) - Tires: 23.5R25 Bridgestone VJT 1 Star -
    Wheel Group - 19.5×25 MP (4) - Tires: 23.5R25 Michelin XHA 2 Star -
    Wheel Group - 19.5×25 MP (5) - Tires: 23.5R25 Michelin XLDD 2 Star L5 -

    Operating Specifications
    Note - Calculated with no slip and 23.5 R25 L-3 tires. -
    Steering Range - Left/Right - 47.5° -
    Forward - 6th - 16 mile/h -
    Forward - 4th - 7.6 mile/h -
    Forward - 5th - 11.8 mile/h -
    Turning Radius - Outside Front Tires - 30.5 ft -
    Forward - 7th - 22 mile/h -
    Top Speed - Forward - 32.1 mile/h -
    Forward - 3rd - 5.5 mile/h -
    Reverse - 6th - 25.3 mile/h -
    Reverse - 5th - 17.4 mile/h -
    Reverse - 2nd - 4.1 mile/h -
    Reverse - 3rd - 6 mile/h -
    Forward - 8th - 32.1 mile/h -
    Reverse - 1st - 2.2 mile/h -
    Forward - 1st - 2.8 mile/h -
    Top Speed - Reverse - 25.4 mile/h -
    Forward - 2nd - 3.8 mile/h -
    Reverse - 4th - 9.3 mile/h -
    Articulation Angle - Left/Right - 20° -

    Frame
    Front Frame Structure - Height - 18.1 in -
    Front Frame Structure - Width - 14 in -
    Drawbar - Width - 3 in -
    Drawbar - Height - 8 in -
    Front Axle - Total Oscillation per Side - 35° -
    Circle - Diameter - 71.7 in -
    Circle - Blade Beam Thickness - 2 in -
    Front Frame Structure - Thickness - 0.6 in -
    Front Axle - Wheel Lean - 18° Left/17° Right -
    Front Axle - Height to Center - 26.4 in -

    Tandems
    Tandem Oscillation - Front Up - 15° -
    Sidewall Thickness - Outer - 0.9 in -
    Sidewall Thickness - Inner - 0.9 in -
    Tandem Oscillation - Front Down - 25° -
    Height - 25.5 in -
    Width - 9.3 in -
    Drive Chain Pitch - 2.5 in -
    Wheel Axle Spacing - 72.5 in -

    Air Conditioning System
    Note - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

    Service Refill Capacities
    Fuel Tank - - 78 gal (US)
    Circle Drive with Slip Clutch - - 2 gal (US)
    Circle Drive without Slip Clutch - - 0.5 gal (US)
    Cooling System - - 40 l
    Engine Crankcase - - 5.5 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 4.2 gal (US)
    Hydraulic System - - 11.9 gal (US)
    Transmission - - 4.8 gal (US)

    Weight
    Weight (Tier 4 Final)** - - 40488 lb
    All-wheel Drive Weight (AWD) (Tier 4 Final)** - - 42119 lb
    All-Wheel Drive Weight (AWD) (Stage V)* - - 40543 lb
    Weight (Stage V)* - - 38912 lb
    Add a Similar Product: