|
|
|
|
Engine |
| Net Power - EEC 80/1269 |
250 HP |
- |
- |
| Net Power - ISO 9249/SAE J1349 |
250 HP |
- |
171 HP |
| Standard Capability |
109 °F |
122 °F |
- |
| Engine RPM |
2,000 |
- |
- |
| Engine Model |
Cat C9.3 |
Cat C13 |
Cat® C4.4 |
| Bore |
4.5 in |
5.1 in |
4.1 in |
| Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards |
| Displacement |
567.5 in³ |
763 in³ |
268.5 in³ |
| Stroke |
5.9 in |
6.2 in |
5 in |
| Number of Cylinders |
6 |
6 |
- |
| Torque Rise - ISO 9294 |
44% |
- |
21% |
| Base Power (1st Gear) - Net |
- |
238 HP |
- |
| Speed at Rated Power |
- |
1,850 rpm |
- |
| Note (3) |
- |
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
| Note (2) |
- |
Optimized VHP Plus is standard for the 14M3. |
- |
| Torque Rise |
- |
41% |
- |
| Maximum Altitude - Full Power |
- |
13900 ft |
- |
| Maximum Torque - VHP Plus |
- |
1137 lb/ft |
- |
| Maximum Altitude - Full Power (Tier 3) |
- |
14349 ft |
- |
| Maximum Altitude - Full Power (Tier 2) |
- |
12049 ft |
- |
| Note (1) |
- |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, |
| Standard - Fan Speed - Minimum |
- |
550 rpm |
- |
| Note (4) |
- |
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) |
- |
| Note (5) |
- |
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
- |
| Standard - Fan Speed - Maximum |
- |
1,600 rpm |
- |
| Derating Altitude |
- |
- |
9842 ft |
| Maximum Torque |
- |
- |
544 lb/ft |
| Engine Power AWD (ISO 14396) |
- |
- |
128 kW |
Weights |
| Operating Weight - Typically Equipped |
20236 lb |
57250 lb |
14496 lb |
| Gross Vehicle Weight - Base* - Total |
- |
50980 lb |
- |
| Gross Vehicle Weight - Base* - Front Axle |
- |
13994 lb |
- |
| Gross Vehicle Weight - Typically Equipped - Total |
- |
57250 lb |
- |
| Gross Vehicle Weight - Typically Equipped - Rear Axle |
- |
42005 lb |
- |
| Gross Vehicle Weight - Typically Equipped - Front Axle |
- |
15245 lb |
- |
| Gross Vehicle Weight - Base* - Rear Axle |
- |
36994 lb |
- |
| Note |
- |
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
- |
Moldboard |
| Blade Width |
12 ft |
14 ft |
12 ft |
| Cutting Edge |
6 in |
- |
- |
| Arc Radius |
16.3 in |
16.3 in |
16.3 in |
| Throat Clearance |
6.5 in |
4.6 in |
4.7 in |
| End Bit |
6 in |
- |
- |
| Blade Width - With End Bits |
- |
169 in |
- |
| Blade Height - With Cutting Edge |
- |
24.9 in |
- |
| Blade Width - Without End Bits |
- |
164 in |
- |
| Blade Height - Without Cutting Edge |
- |
23 in |
- |
| Cutting Edge Width |
- |
- |
6 in |
| End Bit - Width |
- |
- |
152 in |
| Blade Height |
- |
- |
20 in |
Dimensions |
| Basic Blade Width |
140 in |
- |
- |
| Length of Machine* |
397.6 in |
- |
391.4 in |
| Width |
97.6 in |
- |
94.6 in |
| Note |
*Typically equipped with push block and ripper. |
- |
*Typically equipped with push block and ripper. |
| Maximum Height |
132 in |
- |
149.1 in |
Service Refill |
| Hydraulic System |
14.5 gal (US) |
- |
- |
| Engine Crankcase |
7.9 gal (US) |
- |
- |
| Circle Drive |
1.8 gal (US) |
- |
- |
| Fuel Tank |
100 gal (US) |
- |
- |
| Front Wheel Spindle Bearing - Each |
0.13 gal (US) |
- |
- |
Machine Weight |
| Note |
*Typically equipped with push block and ripper. |
- |
- |
| All-Wheel Drive (AWD) Weight |
44613 lb |
- |
36376 lb |
| Weight* |
42325 lb |
- |
- |
Blade Range |
| Maximum Lift Above Ground |
18.9 in |
16.5 in |
16.1 in |
| Maximum Depth of Cut |
28.9 in |
23.3 in |
30.5 in |
| Circle Centershift - Left |
- |
25.6 in |
25.8 in |
| Circle Centershift - Right |
- |
20.5 in |
25.8 in |
| Blade Tip Range - Backward |
- |
5° |
5° |
| Maximum Shoulder Reach Outside of Tires - Right |
- |
78.9 in |
- |
| Moldboard Sideshift - Right |
- |
31.1 in |
26.1 in |
| Moldboard Sideshift - Left |
- |
29.1 in |
20.2 in |
| Maximum Shoulder Reach Outside of Tires - Left |
- |
73.6 in |
- |
| Blade Tip Range - Forward |
- |
40° |
40° |
Frame |
| Circle - Outer Diameter |
- |
71.7 in |
- |
| Front Axle - Wheel Lean - Left/Right |
- |
17.1° |
- |
| Front Axle - Total Oscillation per Side |
- |
32° |
- |
Service Refill Capacities |
| Transmission and Differential |
- |
23.5 gal (US) |
- |
| Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
5.8 gal (US) |
3.2 gal (US) |
| Hydraulic System |
- |
33 gal (US) |
14.5 gal (US) |
| Circle Drive |
- |
1.8 gal (US) |
- |
| Cooling System |
- |
15.9 gal (US) |
10.3 gal (US) |
| Fuel Tank |
- |
109.9 gal (US) |
71 gal (US) |
| Circle Drive without Slip Clutch |
- |
- |
0.4 gal (US) |
| Circle Drive with Slip Clutch |
- |
- |
1.8 gal (US) |
| Transmission |
- |
- |
4.5 gal (US) |
| Engine Crankcase |
- |
- |
2 gal (US) |
Air Conditioning System |
| Air Conditioning |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
- |
Sustainability |
| Recyclability |
- |
- |
92% |
