CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    14 Motor Grader
    View Product Remove
    150 Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP - -
    Net Power - ISO 9249/SAE J1349 250 HP - -
    Standard Capability 109 °F 122 °F 109 °F
    Engine RPM 2,000 - -
    Engine Model Cat C9.3 Cat C13 Cat® C9.3
    Bore 4.5 in 5.1 in 4.5 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent U.S. EPA Tier 4 Final/EU Stage V
    Displacement 567.5 in³ 763 in³ 567.5 in³
    Stroke 5.9 in 6.2 in 5.9 in
    Number of Cylinders 6 6 6
    Torque Rise - ISO 9294 44% - -
    Base Power (1st Gear) - Net - 238 HP -
    Speed at Rated Power - 1,850 rpm 2,000 rpm
    Note (3) - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Note (2) - Optimized VHP Plus is standard for the 14M3. -
    Torque Rise - 41% 39%
    Maximum Altitude - Full Power - 13900 ft -
    Maximum Torque - VHP Plus - 1137 lb/ft 920 lb/ft
    Maximum Altitude - Full Power (Tier 3) - 14349 ft -
    Maximum Altitude - Full Power (Tier 2) - 12049 ft -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. -
    Standard - Fan Speed - Minimum - 550 rpm -
    Note (4) - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) -
    Note (5) - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. -
    Standard - Fan Speed - Maximum - 1,600 rpm -
    Net Power Range (Tier 4) - - 200 HP
    High Ambient - Fan Speed - Standard - - 1,400 rpm
    VHP Plus Range - Net - Metric - - 149-188 kW (202-255 hp)
    VHP Plus Range - Net - - 149-188 kW (200-252 hp)
    VHP Plus - Gear - Net Power - Reverse 1st - - 200 HP
    VHP Plus - Gear - Net Power - Forward 1st - - 200 HP
    VHP Plus - Gear - Net Power - Forward 8th - - 252 HP
    VHP Plus - Gear - Net Power - Forward 6th - - 241 HP
    VHP Plus - Gear - Net Power - Forward 2nd - - 210 HP
    VHP Plus - Gear - Net Power - Forward 7th - - 247 HP
    VHP Plus - Gear - Net Power - Forward 5th - - 236 HP
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 220 HP
    VHP Plus - Gear - Net Power - Forward 4th - - 231 HP
    Base Power (1st Gear) - Net - Metric - - 202 HP
    VHP Plus - Gear - Net Power - Reverse 2nd - - 210 HP
    VHP Plus - Gear - Net Power - Forward 3rd - - 220 HP
    Derating Altitude - - 10000 ft
    High Ambient - Fan Speed - Maximum - - 1,550 rpm
    High Ambient - Fan Speed - Minimum - - 500 rpm
    High - Ambient Capability - - 122 °F

    Weights
    Operating Weight - Typically Equipped 20236 lb 57250 lb 43950 lb
    Gross Vehicle Weight - Base* - Total - 50980 lb -
    Gross Vehicle Weight - Base* - Front Axle - 13994 lb -
    Gross Vehicle Weight - Typically Equipped - Total - 57250 lb -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 42005 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 15245 lb -
    Gross Vehicle Weight - Base* - Rear Axle - 36994 lb -
    Note - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. -
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb
    Operating Weight - Typically Equipped - Front Axle - - 12549 lb
    Operating Weight - Typically Equipped - Rear Axle - - 31401 lb
    Gross Vehicle Weight - Base - Front Axle - - 9601 lb
    Gross Vehicle Weight - Base - Rear Axle - - 28590 lb
    Gross Vehicle Weight - Maximum - Total - - 55144 lb
    Operating Weight - Typically Equipped - Total - - 43950 lb
    Gross Vehicle Weight - Base - Total - - 38191 lb

    Moldboard
    Blade Width 12 ft 14 ft 12 ft
    Cutting Edge 6 in - -
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 4.6 in 6.5 in
    End Bit 6 in - -
    Blade Width - With End Bits - 169 in -
    Blade Height - With Cutting Edge - 24.9 in -
    Blade Width - Without End Bits - 164 in -
    Blade Height - Without Cutting Edge - 23 in -
    Moldboard - Height - - 24 in
    Moldboard - Thickness - - 0.87 in
    Cutting Edge Width - - 6 in
    Cutting Edge Thickness - - 0.6 in
    End Bit - Width - - 6 in
    End Bit - Thickness - - 0.6 in
    Blade Pull - Base GVW - - 25732 lb
    Blade Pull - Maximum GVW - - 34262 lb
    Blade Down Pressure - Base GVW - - 16480 lb
    Blade Down Pressure - Maximum GVW - - 29308 lb
    Moldboard - Blade Width - - 12 ft

    Dimensions
    Basic Blade Width 140 in - -
    Length of Machine* 397.6 in - -
    Width 97.6 in - -
    Note *Typically equipped with push block and ripper. - -
    Maximum Height 132 in - -
    Height - Top of Cab - - 130 in
    Length - Counterweight to Ripper - - 399 in
    Width - Outside Front Tires - - 98.9 in
    Length - Front Axle to Mid Tandem - - 241 in
    Length - Front Tire to Rear of Machine - - 351 in
    Length - Front Axle to Moldboard - - 100 in
    Length - Between Tandem Axles - - 60 in
    Width - Outside Rear Tires - - 98.9 in
    Width - Tire Center Lines - - 84.3 in
    Height - Front Axle Center - - 23.5 in
    Height - Exhaust Stack - - 128 in
    Height - Top of Cylinders - - 120 in
    Ground Clearance - Rear Axle - - 13.3 in

    Service Refill
    Hydraulic System 14.5 gal (US) - -
    Engine Crankcase 7.9 gal (US) - -
    Circle Drive 1.8 gal (US) - -
    Fuel Tank 100 gal (US) - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - -
    Fuel Capacity - - 104 gal (US)
    Cooling System - - 15 gal (US)
    Hydraulic System - Total - - 26.4 gal (US)
    Hydraulic System - Tank - - 16.9 gal (US)
    Transmission - Differential - Final Drives - - 18.5 gal (US)
    Diesel Exhaust Fluid - - 5.8 gal (US)
    Engine Oil - - 7.9 gal (US)
    Tandem Housing - Each - - 20 gal (US)
    Front Wheel Spindle Bearing Housing - - 0.13 gal (US)
    Circle Drive Housing - - 1.8 gal (US)

    Machine Weight
    Note *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight 44613 lb - -
    Weight* 42325 lb - -

    Blade Range
    Maximum Lift Above Ground 18.9 in 16.5 in 18.9 in
    Maximum Depth of Cut 28.9 in 23.3 in 28.1 in
    Circle Centershift - Left - 25.6 in 27.4 in
    Circle Centershift - Right - 20.5 in 28.7 in
    Blade Tip Range - Backward - 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right - 78.9 in 77.9 in
    Moldboard Sideshift - Right - 31.1 in 26 in
    Moldboard Sideshift - Left - 29.1 in 20.1 in
    Maximum Shoulder Reach Outside of Tires - Left - 73.6 in 70.5 in
    Blade Tip Range - Forward - 40° 40°
    Maximum Blade Position Angle - - 90°

    Frame
    Circle - Outer Diameter - 71.7 in -
    Front Axle - Wheel Lean - Left/Right - 17.1° 18°
    Front Axle - Total Oscillation per Side - 32° 32°
    Drawbar - Width - - 3 in
    Circle - Diameter - - 60.2 in
    Circle - Blade Beam Thickness - - 1.6 in
    Drawbar - Height - - 6 in
    Front Frame Structure - Width - - 12 in
    Front Frame Structure - Height - - 12.6 in
    Circle - Height - - 5.4 in
    Drawbar - Thickness - - 0.5 in
    Front-Top/Bottom Plate - Width - - 12 in
    Front-Top/Bottom Plate - Thickness - - 0.87 in
    Front Axle - Height to Center - - 23.5 in

    Service Refill Capacities
    Transmission and Differential - 23.5 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5.8 gal (US) -
    Hydraulic System - 33 gal (US) -
    Circle Drive - 1.8 gal (US) -
    Cooling System - 15.9 gal (US) -
    Fuel Tank - 109.9 gal (US) -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operating Specifications
    Top Speed - Forward - - 29 mile/h
    Top Speed - Reverse - - 23 mile/h
    Turning Radius - Outside Front Tires - - 25.59 ft
    Steering Range - Left/Right - - 50°
    Articulation Angle - Left/Right - - 20°
    Forward - 1st - - 2.5 mile/h
    Forward - 2nd - - 3.4 mile/h
    Forward - 3rd - - 5 mile/h
    Forward - 4th - - 6.9 mile/h
    Forward - 5th - - 10.6 mile/h
    Forward - 6th - - 14.5 mile/h
    Forward - 7th - - 19.9 mile/h
    Forward - 8th - - 29 mile/h
    Reverse - 1st - - 2 mile/h
    Reverse - 2nd - - 3.7 mile/h
    Reverse - 3rd - - 5.4 mile/h
    Reverse - 4th - - 8.4 mile/h
    Reverse - 5th - - 15.7 mile/h
    Reverse - 6th - - 23 mile/h

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse
    Transmission - - APECS, Direct Drive, Powershift
    Brakes - Service - - Multiple Oil Disc
    Brakes - Service - Surface Area - - 3565 in²
    Brakes - Parking - - Multiple Oil Disc
    Brakes - Secondary - - Dual Circuit

    Hydraulic System
    Circuit Type - - Parallel
    Pump Type - - Variable Piston
    Pump Output - - 55.7 gal/min
    Maximum System Pressure - - 3500 psi
    Reservoir Tank Capacity - - 16.9 gal (US)
    Standby Pressure - - 885 psi

    Ripper
    Ripper Shank Holder Spacing - - 21 in
    Ripping Depth - Maximum - - 16.8 in
    Ripper Shank Holders - - 5
    Penetration Force - - 20812 lb
    Pry-Out Force - - 27794 lb
    Machine Length Increase, Beam Raised - - 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 11-May
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in
    Rear - Scarifying Depth, Maximum - - 16.8 in
    Mid, V-Type - Working Width - - 46.6 in
    Front, V-Type - Working Width - - 47.4 in
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in
    Mid, V-Type - Scarifier Shank Holders - - 11
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in
    Rear - Working Width - - 84 in
    Rear - Scarifier Shank Holders - - 9
    Rear - Scarifier Shank Holder Spacing - - 10.5 in

    Standards
    Steering - - ISO 5010
    ROPS/FOPS - - ISO 3471/ISO 3449
    Brakes - - ISO 3450
    Sound - - ISO 6394; ISO 6395

    Tandems
    Height - - 19.9 in
    Width - - 7.9 in
    Sidewall Thickness - Inner - - 0.63 in
    Sidewall Thickness - Outer - - 0.71 in
    Drive Chain Pitch - - 2 in
    Wheel Axle Spacing - - 60 in
    Tandem Oscillation - Front Up - - 15°
    Tandem Oscillation - Front Down - - 25°
    Add a Similar Product: