|
|
|
120 - 2019 - N Am, Global
|
Engine |
| Net Power - EEC 80/1269 |
250 HP |
- |
- |
| Net Power - ISO 9249/SAE J1349 |
250 HP |
- |
- |
| Standard Capability |
109 °F |
109 °F |
122 °F |
| Engine RPM |
2,000 |
2,200 |
2,000 |
| Engine Model |
Cat C9.3 |
Cat 7.1 |
Cat 7.1 |
| Bore |
4.5 in |
4.1 in |
4.1 in |
| Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
U.S. EPA Tier 4 Final/EU Stage V |
U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA |
| Displacement |
567.5 in³ |
427.8 in³ |
427.8 in³ |
| Stroke |
5.9 in |
5.3 in |
5.3 in |
| Number of Cylinders |
6 |
6 |
6 |
| Torque Rise - ISO 9294 |
44% |
40% |
42% |
| Engine Power (ISO 14396) |
- |
196 HP |
- |
| Derating Altitude |
- |
9842 ft |
9842.5 ft |
| High - Ambient Capability |
- |
122 °F |
- |
| Maximum Torque - ISO 9249 |
- |
616 lb/ft |
606 lb/ft |
| Note (1) |
- |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." |
| Note (2) |
- |
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) |
- |
Power as declared per ISO 14396 |
Power as declared per ISO 14396 |
| Engine Power AWD (ISO 14396) |
- |
196 HP |
- |
| All-Wheel Drive Net Power Range (Tier 3) |
- |
- |
130 HP |
| Net Power Range (Tier 3) |
- |
- |
130 HP |
| Maximum Torque - AWD On |
- |
- |
611 lb/ft |
| Derating Altitude (AWD) |
- |
- |
5499 ft |
Weights |
| Operating Weight - Typically Equipped |
20236 lb |
38912 lb |
35067 lb |
| Note |
- |
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
- |
Moldboard |
| Blade Width |
12 ft |
12 ft |
12 ft |
| Cutting Edge |
6 in |
- |
6 in |
| Arc Radius |
16.3 in |
16.3 in |
16.3 in |
| Throat Clearance |
6.5 in |
4.4 in |
4.1 in |
| End Bit |
6 in |
6 in |
6 in |
| Blade Height |
- |
24 in |
24 in |
| Cutting Edge Width |
- |
6 in |
- |
Dimensions |
| Basic Blade Width |
140 in |
- |
12 ft |
| Length of Machine* |
397.6 in |
406.7 in |
387 in |
| Width |
97.6 in |
95.6 in |
102 in |
| Note |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
| Maximum Height |
132 in |
132.4 in |
136.4 in |
| Width All Wheel Drive (AWD) |
- |
99.3 in |
2551 mm |
Service Refill |
| Hydraulic System |
14.5 gal (US) |
- |
- |
| Engine Crankcase |
7.9 gal (US) |
- |
- |
| Circle Drive |
1.8 gal (US) |
- |
- |
| Fuel Tank |
100 gal (US) |
- |
- |
| Front Wheel Spindle Bearing - Each |
0.13 gal (US) |
- |
- |
Machine Weight |
| Note |
*Typically equipped with push block and ripper. |
- |
- |
| All-Wheel Drive (AWD) Weight |
44613 lb |
- |
- |
| Weight* |
42325 lb |
- |
- |
| Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 |
- |
- |
36731 lb |
| Note (1) |
- |
- |
*Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
| Joystick Weight* Tier 4 |
- |
- |
35358 lb |
| Joystick All-Wheel Drive (AWD) Weight* Tier 4 |
- |
- |
36846 lb |
| Lever/Steering Wheel Weight* Tier 4 |
- |
- |
35067 lb |
Blade Range |
| Maximum Lift Above Ground |
18.9 in |
18.7 in |
16.1 in |
| Maximum Depth of Cut |
28.9 in |
28.1 in |
30.5 in |
| Circle Center Shift Left |
- |
29.6 in |
26 in |
| Circle Center Shift Right |
- |
28.7 in |
26 in |
| Maximum Shoulder Reach Left |
- |
74.3 in |
69.4 in |
| Maximum Shoulder Reach Right |
- |
71.3 in |
76 in |
| Moldboard Side Shift Left |
- |
25.6 in |
20.1 in |
| Moldboard Side Shift Right |
- |
20.7 in |
26.1 in |
| Blade Tip Range Backward |
- |
5 |
5 |
| Blade Tip Range Forward |
- |
40 |
40 |
Air Conditioning System |
| Note |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. |
Service Refill Capacities |
| Fuel Tank |
- |
78 gal (US) |
65 gal (US) |
| Circle Drive with Slip Clutch |
- |
2 gal (US) |
- |
| Circle Drive without Slip Clutch |
- |
0.5 gal (US) |
- |
| Cooling System |
- |
40 l |
14 gal (US) |
| Engine Crankcase |
- |
5.5 gal (US) |
4.8 gal (US) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
4.2 gal (US) |
5 gal (US) |
| Hydraulic System |
- |
11.9 gal (US) |
25.6 gal (US) |
| Transmission |
- |
4.8 gal (US) |
- |
| Transmission and Differential |
- |
- |
9 gal (US) |
| Circle Drive |
- |
- |
1.8 gal (US) |
Weight |
| Weight (Tier 4 Final)** |
- |
40488 lb |
- |
| All-wheel Drive Weight (AWD) (Tier 4 Final)** |
- |
42119 lb |
- |
| All-Wheel Drive Weight (AWD) (Stage V)* |
- |
40543 lb |
- |
| Weight (Stage V)* |
- |
38912 lb |
- |
