|
|
|
|
|
Engine |
Net Power - EEC 80/1269 |
250 HP |
535 HP |
- |
- |
Net Power - ISO 9249/SAE J1349 |
250 HP |
- |
- |
171 HP |
Standard Capability |
109 °F |
122 °F |
109 °F |
- |
Engine RPM |
2,000 |
- |
2,200 |
- |
Engine Model |
Cat C9.3 |
Cat C27 |
Cat 7.1 |
Cat® C4.4 |
Bore |
4.5 in |
5.4 in |
4.1 in |
4.1 in |
Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II |
U.S. EPA Tier 4 Final/EU Stage V |
Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards |
Displacement |
567.5 in³ |
1648 in³ |
427.8 in³ |
268.5 in³ |
Stroke |
5.9 in |
6 in |
5.3 in |
5 in |
Number of Cylinders |
6 |
12 |
6 |
- |
Torque Rise - ISO 9294 |
44% |
- |
40% |
21% |
Note (1) |
- |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, |
Note (3) |
- |
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Power as declared per ISO 14396 |
- |
Note (2) |
- |
Optimized VHP Plus is standard for the 24. |
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
Note (4) |
- |
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) |
- |
- |
Engine Power (ISO 14396) |
- |
- |
196 HP |
- |
Derating Altitude |
- |
- |
9842 ft |
9842 ft |
High - Ambient Capability |
- |
- |
122 °F |
- |
Maximum Torque - ISO 9249 |
- |
- |
616 lb/ft |
- |
Engine Power AWD (ISO 14396) |
- |
- |
196 HP |
128 kW |
Maximum Torque |
- |
- |
- |
544 lb/ft |
Weights |
Operating Weight - Typically Equipped |
20236 lb |
165314 lb |
38912 lb |
14496 lb |
Note |
- |
- |
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
- |
Moldboard |
Blade Width |
12 ft |
24 ft |
12 ft |
12 ft |
Cutting Edge |
6 in |
- |
- |
- |
Arc Radius |
16.3 in |
- |
16.3 in |
16.3 in |
Throat Clearance |
6.5 in |
- |
4.4 in |
4.7 in |
End Bit |
6 in |
- |
6 in |
- |
Blade Height |
- |
40 in |
24 in |
20 in |
Cutting Edge Width |
- |
- |
6 in |
6 in |
End Bit - Width |
- |
- |
- |
152 in |
Dimensions |
Basic Blade Width |
140 in |
- |
- |
- |
Length of Machine* |
397.6 in |
- |
406.7 in |
391.4 in |
Width |
97.6 in |
- |
95.6 in |
94.6 in |
Note |
*Typically equipped with push block and ripper. |
- |
*Typically equipped with push block and ripper. |
*Typically equipped with push block and ripper. |
Maximum Height |
132 in |
- |
132.4 in |
149.1 in |
Width All Wheel Drive (AWD) |
- |
- |
99.3 in |
- |
Service Refill |
Hydraulic System |
14.5 gal (US) |
- |
- |
- |
Engine Crankcase |
7.9 gal (US) |
- |
- |
- |
Circle Drive |
1.8 gal (US) |
- |
- |
- |
Fuel Tank |
100 gal (US) |
- |
- |
- |
Front Wheel Spindle Bearing - Each |
0.13 gal (US) |
- |
- |
- |
Machine Weight |
Note |
*Typically equipped with push block and ripper. |
- |
- |
- |
All-Wheel Drive (AWD) Weight |
44613 lb |
- |
- |
36376 lb |
Weight* |
42325 lb |
161695 lb |
- |
- |
Blade Range |
Maximum Lift Above Ground |
18.9 in |
16.1 in |
18.7 in |
16.1 in |
Maximum Depth of Cut |
28.9 in |
21.7 in |
28.1 in |
30.5 in |
Circle Center Shift Left |
- |
- |
29.6 in |
- |
Circle Center Shift Right |
- |
- |
28.7 in |
- |
Maximum Shoulder Reach Left |
- |
- |
74.3 in |
- |
Maximum Shoulder Reach Right |
- |
- |
71.3 in |
- |
Moldboard Side Shift Left |
- |
- |
25.6 in |
- |
Moldboard Side Shift Right |
- |
- |
20.7 in |
- |
Blade Tip Range Backward |
- |
- |
5 |
- |
Blade Tip Range Forward |
- |
- |
40 |
- |
Blade Tip Range - Backward |
- |
- |
- |
5° |
Moldboard Sideshift - Right |
- |
- |
- |
26.1 in |
Moldboard Sideshift - Left |
- |
- |
- |
20.2 in |
Circle Centershift - Left |
- |
- |
- |
25.8 in |
Blade Tip Range - Forward |
- |
- |
- |
40° |
Circle Centershift - Right |
- |
- |
- |
25.8 in |
Air Conditioning System |
Note |
- |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
- |
Service Refill Capacities |
Fuel Tank |
- |
- |
78 gal (US) |
71 gal (US) |
Circle Drive with Slip Clutch |
- |
- |
2 gal (US) |
1.8 gal (US) |
Circle Drive without Slip Clutch |
- |
- |
0.5 gal (US) |
0.4 gal (US) |
Cooling System |
- |
- |
40 l |
10.3 gal (US) |
Engine Crankcase |
- |
- |
5.5 gal (US) |
2 gal (US) |
Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
- |
4.2 gal (US) |
3.2 gal (US) |
Hydraulic System |
- |
- |
11.9 gal (US) |
14.5 gal (US) |
Transmission |
- |
- |
4.8 gal (US) |
4.5 gal (US) |
Weight |
Weight (Tier 4 Final)** |
- |
- |
40488 lb |
- |
All-wheel Drive Weight (AWD) (Tier 4 Final)** |
- |
- |
42119 lb |
- |
All-Wheel Drive Weight (AWD) (Stage V)* |
- |
- |
40543 lb |
- |
Weight (Stage V)* |
- |
- |
38912 lb |
- |
Sustainability |
Recyclability |
- |
- |
- |
92% |