|
|
|
|
Engine |
Net Power - EEC 80/1269 |
250 HP |
535 HP |
- |
Net Power - ISO 9249/SAE J1349 |
250 HP |
- |
171 HP |
Standard Capability |
109 °F |
122 °F |
- |
Engine RPM |
2,000 |
- |
- |
Engine Model |
Cat C9.3 |
Cat C27 |
Cat® C4.4 |
Bore |
4.5 in |
5.4 in |
4.1 in |
Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II |
Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards |
Displacement |
567.5 in³ |
1648 in³ |
268.5 in³ |
Stroke |
5.9 in |
6 in |
5 in |
Number of Cylinders |
6 |
12 |
- |
Torque Rise - ISO 9294 |
44% |
- |
21% |
Note (1) |
- |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, |
Note (3) |
- |
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
- |
Note (2) |
- |
Optimized VHP Plus is standard for the 24. |
- |
Note (4) |
- |
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) |
- |
Derating Altitude |
- |
- |
9842 ft |
Maximum Torque |
- |
- |
544 lb/ft |
Engine Power AWD (ISO 14396) |
- |
- |
128 kW |
Weights |
Operating Weight - Typically Equipped |
20236 lb |
165314 lb |
14496 lb |
Moldboard |
Blade Width |
12 ft |
24 ft |
12 ft |
Cutting Edge |
6 in |
- |
- |
Arc Radius |
16.3 in |
- |
16.3 in |
Throat Clearance |
6.5 in |
- |
4.7 in |
End Bit |
6 in |
- |
- |
Blade Height |
- |
40 in |
20 in |
Cutting Edge Width |
- |
- |
6 in |
End Bit - Width |
- |
- |
152 in |
Dimensions |
Basic Blade Width |
140 in |
- |
- |
Length of Machine* |
397.6 in |
- |
391.4 in |
Width |
97.6 in |
- |
94.6 in |
Note |
*Typically equipped with push block and ripper. |
- |
*Typically equipped with push block and ripper. |
Maximum Height |
132 in |
- |
149.1 in |
Service Refill |
Hydraulic System |
14.5 gal (US) |
- |
- |
Engine Crankcase |
7.9 gal (US) |
- |
- |
Circle Drive |
1.8 gal (US) |
- |
- |
Fuel Tank |
100 gal (US) |
- |
- |
Front Wheel Spindle Bearing - Each |
0.13 gal (US) |
- |
- |
Machine Weight |
Note |
*Typically equipped with push block and ripper. |
- |
- |
All-Wheel Drive (AWD) Weight |
44613 lb |
- |
36376 lb |
Weight* |
42325 lb |
161695 lb |
- |
Blade Range |
Maximum Lift Above Ground |
18.9 in |
16.1 in |
16.1 in |
Maximum Depth of Cut |
28.9 in |
21.7 in |
30.5 in |
Blade Tip Range - Backward |
- |
- |
5° |
Moldboard Sideshift - Right |
- |
- |
26.1 in |
Moldboard Sideshift - Left |
- |
- |
20.2 in |
Circle Centershift - Left |
- |
- |
25.8 in |
Blade Tip Range - Forward |
- |
- |
40° |
Circle Centershift - Right |
- |
- |
25.8 in |
Service Refill Capacities |
Cooling System |
- |
- |
10.3 gal (US) |
Circle Drive without Slip Clutch |
- |
- |
0.4 gal (US) |
Hydraulic System |
- |
- |
14.5 gal (US) |
Circle Drive with Slip Clutch |
- |
- |
1.8 gal (US) |
Transmission |
- |
- |
4.5 gal (US) |
Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
- |
3.2 gal (US) |
Fuel Tank |
- |
- |
71 gal (US) |
Engine Crankcase |
- |
- |
2 gal (US) |
Sustainability |
Recyclability |
- |
- |
92% |