|
|
|
|
Engine |
Net Power - EEC 80/1269 |
250 HP |
535 HP |
- |
Net Power - ISO 9249/SAE J1349 |
250 HP |
- |
- |
Standard Capability |
109 °F |
122 °F |
109 °F |
Engine RPM |
2,000 |
- |
2,200 |
Engine Model |
Cat C9.3 |
Cat C27 |
Cat 7.1 |
Bore |
4.5 in |
5.4 in |
4.1 in |
Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II |
U.S. EPA Tier 4 Final/EU Stage V |
Displacement |
567.5 in³ |
1648 in³ |
427.8 in³ |
Stroke |
5.9 in |
6 in |
5.3 in |
Number of Cylinders |
6 |
12 |
6 |
Torque Rise - ISO 9294 |
44% |
- |
40% |
Note (1) |
- |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
Note (3) |
- |
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Power as declared per ISO 14396 |
Note (2) |
- |
Optimized VHP Plus is standard for the 24. |
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Note (4) |
- |
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) |
- |
Engine Power (ISO 14396) |
- |
- |
196 HP |
Derating Altitude |
- |
- |
9842 ft |
High - Ambient Capability |
- |
- |
122 °F |
Maximum Torque - ISO 9249 |
- |
- |
616 lb/ft |
Engine Power AWD (ISO 14396) |
- |
- |
196 HP |
Weights |
Operating Weight - Typically Equipped |
20236 lb |
165314 lb |
38912 lb |
Note |
- |
- |
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
Moldboard |
Blade Width |
12 ft |
24 ft |
12 ft |
Cutting Edge |
6 in |
- |
- |
Arc Radius |
16.3 in |
- |
16.3 in |
Throat Clearance |
6.5 in |
- |
4.4 in |
End Bit |
6 in |
- |
6 in |
Blade Height |
- |
40 in |
24 in |
Cutting Edge Width |
- |
- |
6 in |
Dimensions |
Basic Blade Width |
140 in |
- |
- |
Length of Machine* |
397.6 in |
- |
406.7 in |
Width |
97.6 in |
- |
95.6 in |
Note |
*Typically equipped with push block and ripper. |
- |
*Typically equipped with push block and ripper. |
Maximum Height |
132 in |
- |
132.4 in |
Width All Wheel Drive (AWD) |
- |
- |
99.3 in |
Service Refill |
Hydraulic System |
14.5 gal (US) |
- |
- |
Engine Crankcase |
7.9 gal (US) |
- |
- |
Circle Drive |
1.8 gal (US) |
- |
- |
Fuel Tank |
100 gal (US) |
- |
- |
Front Wheel Spindle Bearing - Each |
0.13 gal (US) |
- |
- |
Machine Weight |
Note |
*Typically equipped with push block and ripper. |
- |
- |
All-Wheel Drive (AWD) Weight |
44613 lb |
- |
- |
Weight* |
42325 lb |
161695 lb |
- |
Blade Range |
Maximum Lift Above Ground |
18.9 in |
16.1 in |
18.7 in |
Maximum Depth of Cut |
28.9 in |
21.7 in |
28.1 in |
Circle Center Shift Left |
- |
- |
29.6 in |
Circle Center Shift Right |
- |
- |
28.7 in |
Maximum Shoulder Reach Left |
- |
- |
74.3 in |
Maximum Shoulder Reach Right |
- |
- |
71.3 in |
Moldboard Side Shift Left |
- |
- |
25.6 in |
Moldboard Side Shift Right |
- |
- |
20.7 in |
Blade Tip Range Backward |
- |
- |
5 |
Blade Tip Range Forward |
- |
- |
40 |
Air Conditioning System |
Note |
- |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
Service Refill Capacities |
Fuel Tank |
- |
- |
78 gal (US) |
Circle Drive with Slip Clutch |
- |
- |
2 gal (US) |
Circle Drive without Slip Clutch |
- |
- |
0.5 gal (US) |
Cooling System |
- |
- |
40 l |
Engine Crankcase |
- |
- |
5.5 gal (US) |
Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
- |
4.2 gal (US) |
Hydraulic System |
- |
- |
11.9 gal (US) |
Transmission |
- |
- |
4.8 gal (US) |
Weight |
Weight (Tier 4 Final)** |
- |
- |
40488 lb |
All-wheel Drive Weight (AWD) (Tier 4 Final)** |
- |
- |
42119 lb |
All-Wheel Drive Weight (AWD) (Stage V)* |
- |
- |
40543 lb |
Weight (Stage V)* |
- |
- |
38912 lb |