CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    16 Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 hp - -
    Net Power - ISO 9249/SAE J1349 250 hp - -
    Standard Capability 109 °F - -
    Engine RPM 2,000 - -
    Engine Model Cat C9.3 Cat® C13 -
    Bore 4.5 in 5.1 in -
    Emissions U.S. EPA Tier 4 Final/EU Stage V - -
    Displacement 567.5 in³ 763 in³ -
    Stroke 5.9 in 6.2 in -
    Number of Cylinders 6 6 -
    Torque Rise - ISO 9294 44% - -
    Base Power (1st Gear) - Net - 290 hp -
    Speed at Rated Power - 2,000 rpm -
    Optimized VHP Range - Net - 216-259 kW (290-348 hp) -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 12176 ft -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 1270 lb/ft -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) - 1306 lb/ft -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 1270 lb/ft -
    Emissions (2) - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) - 43% -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 39% -
    Standard - Ambient Capability - 122 °F -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 12973 ft -
    VHP Range - Net - Metric - 216-259 kW (294-353 hp) -
    Base Power (1st Gear) - Net - Metric - 294 hp -
    Standard - Fan Speed - Minimum - 550 rpm -
    Standard - Fan Speed - Maximum - 1,450 rpm -
    Emissions (3) - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 39% -
    Emissions (1) - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) -
    VHP Range - Net - 216-259 kW (290-348 hp) -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) - 12500 ft -

    Weights
    Operating Weight - Typically Equipped 44613 lb 71454 lb -

    Moldboard
    Blade Width 12 ft 16 ft -
    Cutting Edge 6 in - -
    Arc Radius 16.3 in 16.3 in -
    Throat Clearance 6.5 in 5 in -
    End Bit 6 in - -
    Note - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. -
    Thickness - 1 in -
    End Bit - Width - 6 in -
    Blade Pull* - Base GVW - 41039 lb -
    Cutting Edge Width - 8 in -
    Cutting Edge Thickness - 1 in -
    Down Force - Maximum GVW - 43861 lb -
    Height - 31 in -
    Width - 16 ft -
    Down Force - Base GVW - 30743 lb -
    Blade Pull* - Maximum GVW - 52878 lb -
    End Bit - Thickness - 0.75 in -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con -

    Dimensions
    Basic Blade Width 140 in - -
    Length of Machine* 397.6 in - -
    Width 97.6 in - -
    Note *Typically equipped with push block and ripper. - -
    Maximum Height 132 in - -

    Service Refill
    Hydraulic System 14.5 gal (US) - -
    Engine Crankcase 7.9 gal (US) - -
    Circle Drive 1.8 gal (US) - -
    Fuel Tank 100 gal (US) - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - -
    Fuel Capacity - 131 gal (US) -
    Cooling System - 18.5 gal (US) -
    DEF Tank - 4.2 gal (US) -
    Hydraulic System - Total - 38.6 gal (US) -
    Hydraulic System - Tank - 18.5 gal (US) -
    Engine Oil - 9.5 gal (US) -
    Transmission - Differential - Final Drives - 34 gal (US) -
    Tandem Housing - Each - 34 gal (US) -
    Front Wheel Spindle Bearing Housing - 0.24 gal (US) -
    Circle Drive Housing - 2.6 gal (US) -

    Machine Weight
    Note *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight 44613 lb - -

    Blade Range
    Maximum Lift Above Ground 18.9 in 15.7 in -
    Maximum Depth of Cut 28.9 in 18.5 in -
    Maximum Blade Position Angle - 65° -
    Maximum Shoulder Reach Outside of Tires - Right - 91 in -
    Moldboard Sideshift - Left - 29.1 in -
    Circle Centershift - Right - 22 in -
    Circle Centershift - Left - 27.2 in -
    Moldboard Sideshift - Right - 31.1 in -
    Maximum Shoulder Reach Outside of Tires - Left - 91 in -
    Blade Tip Range - Forward - 40° -
    Blade Tip Range - Backward - 5° -

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse -
    Transmission - Direct drive, power shift, countershaft -
    Brakes - Dynamic Brake Torque per Wheel - 27069.27 lb/ft -
    Brakes - Secondary - Oil-actuated, oil-disc -
    Brakes - Service - Oil-actuated, oil disc -
    Brakes - Parking - Spring applied, hydraulically released -

    Hydraulic System
    Circuit Type - Electro-hydraulic load sensing, closed center -
    Pump Type - Variable piston -
    Maximum System Pressure - 3590 psi -
    Standby Pressure - 856 psi -
    Pump Output* - 74 gal/min -
    Note - *Pump output measured at 2,150 rpm. -

    Ripper
    Ripping Depth - Maximum - 17.8 in -
    Shank Holder Spacing - Minimum - 17.5 in -
    Shank Holder Spacing - Maximum - 20 in -
    Ripper Shank Holders - 7 -
    Penetration Force - 30311 lb -
    Pry-Out Force - 43700 lb -
    Machine Length Increase, Beam Raised - 63.4 in -

    Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Total - 84877 lb -
    Gross Vehicle Weight - Base** - Total - 63528 lb -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 52201 lb -
    Gross Vehicle Weight - Typically Equipped - Total - 71454 lb -
    Gross Vehicle Weight - Maximum Tested - Front Axle - 26125 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 19253 lb -
    Gross Vehicle Weight - Maximum Tested - Rear Axle - 58753 lb -
    Gross Vehicle Weight - Base** - Front Axle - 17932 lb -
    Gross Vehicle Weight - Base** - Rear Axle - 45596 lb -
    Note (1) - *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. -
    Note (2) - **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. -

    Dimensions (Approximate)
    Ground Clearance - Rear Axle - 15.6 in -
    Length - Counterweight to Ripper - 474.4 in -
    Length - Front Axle to Moldboard - 120.7 in -
    Length - Front Axle to Mid Tandem - 290 in -
    Height - Top of Cylinders - 121.6 in -
    Width - Tire Center Lines - 106.4 in -
    Width - Outside Rear Tires - 134.3 in -
    Length - Between Tandem Axles - 72.5 in -
    Height - Top of Cab - 146.4 in -
    Width - Outside Front Tires - 134.3 in -
    Height - Front Axle Center - 28.9 in -
    Length - Front Tire to Rear of Machine - Including Tow Hitch - 417 in -
    Height - Exhaust Stack - 140 in -

    Standards
    Steering - ISO 5010:2007 -
    Brakes - ISO 3450:2011 -
    Sound - ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 -
    ROPS/FOPS - ISO 3471:2008/ISO 3449:2005 -
    Note (1) - The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the -
    Note (2) - The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
    Gear - Reverse 3rd-6th - 298 hp -
    Gear - Forward 8th - 348 hp -
    Gear - Forward 3rd - 298 hp -
    Gear - Forward 6th - 320 hp -
    Gear - Forward 5th - 311 hp -
    Gear - Reverse 1st - 290 hp -
    Gear - Reverse 2nd - 290 hp -
    Gear - Forward 4th - 304 hp -
    Gear - Forward 7th - 328 hp -
    Gear - Forward 1st - 290 hp -
    Gear - Forward 2nd - 290 hp -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
    Gear - Forward 4th - 309 hp -
    Gear - Reverse 1st - 294 hp -
    Gear - Forward 3rd - 302 hp -
    Gear - Reverse 3rd-6th - 302 hp -
    Gear - Reverse 2nd - 294 hp -
    Gear - Forward 7th - 332 hp -
    Gear - Forward 6th - 325 hp -
    Gear - Forward 8th - 353 hp -
    Gear - Forward 1st - 294 hp -
    Gear - Forward 5th - 315 hp -
    Gear - Forward 2nd - 294 hp -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (1) - Tires: 23.5R25 Bridgestone VKT 2 Star -
    Wheel Group - 19.5×25 MP (2) - Tires: 23.5R25 Bridgestone VKT 1 Star -
    Wheel Group - 19.5×25 MP (3) - Tires: 23.5R25 Bridgestone VJT 1 Star -
    Wheel Group - 19.5×25 MP (4) - Tires: 23.5R25 Michelin XHA 2 Star -
    Wheel Group - 19.5×25 MP (5) - Tires: 23.5R25 Michelin XLDD 2 Star L5 -

    Operating Specifications
    Note - Calculated with no slip and 23.5 R25 L-3 tires. -
    Steering Range - Left/Right - 47.5° -
    Forward - 6th - 16 mile/h -
    Forward - 4th - 7.6 mile/h -
    Forward - 5th - 11.8 mile/h -
    Turning Radius - Outside Front Tires - 30.5 ft -
    Forward - 7th - 22 mile/h -
    Top Speed - Forward - 32.1 mile/h -
    Forward - 3rd - 5.5 mile/h -
    Reverse - 6th - 25.3 mile/h -
    Reverse - 5th - 17.4 mile/h -
    Reverse - 2nd - 4.1 mile/h -
    Reverse - 3rd - 6 mile/h -
    Forward - 8th - 32.1 mile/h -
    Reverse - 1st - 2.2 mile/h -
    Forward - 1st - 2.8 mile/h -
    Top Speed - Reverse - 25.4 mile/h -
    Forward - 2nd - 3.8 mile/h -
    Reverse - 4th - 9.3 mile/h -
    Articulation Angle - Left/Right - 20° -

    Frame
    Front Frame Structure - Height - 18.1 in -
    Front Frame Structure - Width - 14 in -
    Drawbar - Width - 3 in -
    Drawbar - Height - 8 in -
    Front Axle - Total Oscillation per Side - 35° -
    Circle - Diameter - 71.7 in -
    Circle - Blade Beam Thickness - 2 in -
    Front Frame Structure - Thickness - 0.6 in -
    Front Axle - Wheel Lean - 18° Left/17° Right -
    Front Axle - Height to Center - 26.4 in -

    Tandems
    Tandem Oscillation - Front Up - 15° -
    Sidewall Thickness - Outer - 0.9 in -
    Sidewall Thickness - Inner - 0.9 in -
    Tandem Oscillation - Front Down - 25° -
    Height - 25.5 in -
    Width - 9.3 in -
    Drive Chain Pitch - 2.5 in -
    Wheel Axle Spacing - 72.5 in -
    Add a Similar Product: