CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    140/140 AWD Motor Grader
    View Product Remove
    120 GC
    View Product Remove
    14 Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP - - -
    Net Power - ISO 9249/SAE J1349 250 HP - 171 HP -
    Standard Capability 109 °F 109 °F - 122 °F
    Engine RPM 2,000 - - -
    Engine Model Cat C9.3 Cat® C9.3 Cat® C4.4 Cat C13
    Bore 4.5 in 4.5 in 4.1 in 5.1 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V Meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
    Displacement 567.5 in³ 567.5 in³ 268.5 in³ 763 in³
    Stroke 5.9 in 5.9 in 5 in 6.2 in
    Number of Cylinders 6 6 - 6
    Torque Rise - ISO 9294 44% - 21% -
    Net Power Range (Tier 4) - 179 HP - -
    Speed at Rated Power - 2,000 rpm - 1,850 rpm
    Maximum Torque - VHP Plus - 840 lb/ft - 1137 lb/ft
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - 200 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd - 189 HP - -
    VHP Plus - Gear - Net Power - Forward 5th - 215 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd - 200 HP - -
    VHP Plus - Gear - Net Power - Forward 8th - 231 HP - -
    Torque Rise - 38% - 41%
    VHP Plus - Gear - Net Power - Reverse 2nd - 189 HP - -
    VHP Plus - Gear - Net Power - Forward 1st - 179 HP - -
    VHP Plus - Gear - Net Power - Forward 6th - 220 HP - -
    VHP Plus - Gear - Net Power - Reverse 1st - 179 HP - -
    VHP Plus Range - Net - 133-172 kW (179-231 hp) - -
    VHP Plus - Gear - Net Power - Forward 7th - 225 HP - -
    VHP Plus Range - Net - Metric - 133-172 kW (181-234 hp) - -
    VHP Plus - Gear - Net Power - Forward 4th - 210 HP - -
    Base Power (1st Gear) - Net - Metric - 181 HP - -
    High Ambient - Fan Speed - Standard - 1,400 rpm - -
    Derating Altitude - 10000 ft 9842 ft -
    High Ambient - Fan Speed - Maximum - 1,550 rpm - -
    High Ambient - Fan Speed - Minimum - 500 rpm - -
    High - Ambient Capability - 122 °F - -
    Maximum Torque - - 544 lb/ft -
    Engine Power AWD (ISO 14396) - - 128 kW -
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Base Power (1st Gear) - Net - - - 238 HP
    Note (3) - - - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (2) - - - Optimized VHP Plus is standard for the 14M3.
    Maximum Altitude - Full Power - - - 13900 ft
    Maximum Altitude - Full Power (Tier 3) - - - 14349 ft
    Maximum Altitude - Full Power (Tier 2) - - - 12049 ft
    Standard - Fan Speed - Minimum - - - 550 rpm
    Note (4) - - - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
    Note (5) - - - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
    Standard - Fan Speed - Maximum - - - 1,600 rpm

    Weights
    Operating Weight - Typically Equipped 20236 lb 42647 lb 14496 lb 57250 lb
    Gross Vehicle Weight - Maximum - Front Axle - 17075 lb - -
    Gross Vehicle Weight - Maximum - Rear Axle - 38069 lb - -
    Operating Weight - Typically Equipped - Front Axle - 12055 lb - -
    Operating Weight - Typically Equipped - Rear Axle - 30592 lb - -
    Gross Vehicle Weight - Base - Front Axle - 9343 lb - -
    Gross Vehicle Weight - Base - Rear Axle - 28077 lb - -
    Gross Vehicle Weight - Maximum - Total - 55144 lb - -
    Gross Vehicle Weight - Base - Total - 37420 lb - -
    Operating Weight - Typically Equipped - Total - 42647 lb - -
    Gross Vehicle Weight - Base* - Total - - - 50980 lb
    Gross Vehicle Weight - Base* - Front Axle - - - 13994 lb
    Gross Vehicle Weight - Typically Equipped - Total - - - 57250 lb
    Gross Vehicle Weight - Typically Equipped - Rear Axle - - - 42005 lb
    Gross Vehicle Weight - Typically Equipped - Front Axle - - - 15245 lb
    Gross Vehicle Weight - Base* - Rear Axle - - - 36994 lb
    Note - - - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.

    Moldboard
    Blade Width 12 ft 12 ft 12 ft 14 ft
    Cutting Edge 6 in - - -
    Arc Radius 16.3 in 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 6.5 in 4.7 in 4.6 in
    End Bit 6 in - - -
    Moldboard - Height - 24 in - -
    Moldboard - Thickness - 0.87 in - -
    Cutting Edge Width - 6 in 6 in -
    Cutting Edge Thickness - 0.6 in - -
    End Bit - Width - 6 in 152 in -
    End Bit - Thickness - 0.6 in - -
    Blade Pull - Base GVW - 25269 lb - -
    Blade Pull - Maximum GVW - 34262 lb - -
    Blade Down Pressure - Base GVW - 16038 lb - -
    Blade Down Pressure - Maximum GVW - 29309 lb - -
    Moldboard - Blade Width - 12 ft - -
    Blade Height - - 20 in -
    Blade Width - With End Bits - - - 169 in
    Blade Height - With Cutting Edge - - - 24.9 in
    Blade Width - Without End Bits - - - 164 in
    Blade Height - Without Cutting Edge - - - 23 in

    Dimensions
    Basic Blade Width 140 in - - -
    Length of Machine* 397.6 in - 391.4 in -
    Width 97.6 in - 94.6 in -
    Note *Typically equipped with push block and ripper. - *Typically equipped with push block and ripper. -
    Maximum Height 132 in - 149.1 in -
    Height - Top of Cab - 130 in - -
    Length - Counterweight to Ripper - 399 in - -
    Width - Outside Front Tires - 98.9 in - -
    Length - Front Axle to Mid Tandem - 241 in - -
    Length - Front Tire to Rear of Machine - 351 in - -
    Length - Front Axle to Moldboard - 100 in - -
    Length - Between Tandem Axles - 60 in - -
    Width - Outside Rear Tires - 98.9 in - -
    Width - Tire Center Lines - 84.3 in - -
    Height - Front Axle Center - 23.5 in - -
    Height - Exhaust Stack - 128 in - -
    Height - Top of Cylinders - 120 in - -
    Ground Clearance - Rear Axle - 13.3 in - -

    Service Refill
    Hydraulic System 14.5 gal (US) - - -
    Engine Crankcase 7.9 gal (US) - - -
    Circle Drive 1.8 gal (US) - - -
    Fuel Tank 100 gal (US) - - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - - -
    Fuel Capacity - 104 gal (US) - -
    Cooling System - 15 gal (US) - -
    Hydraulic System - Total - 26.4 gal (US) - -
    Hydraulic System - Tank - 16.9 gal (US) - -
    Diesel Exhaust Fluid - 5.8 gal (US) - -
    Transmission - Differential - Final Drives - 18.5 gal (US) - -
    Engine Oil - 7.9 gal (US) - -
    Tandem Housing - Each - 20 gal (US) - -
    Front Wheel Spindle Bearing Housing - 0.13 gal (US) - -
    Circle Drive Housing - 1.8 gal (US) - -

    Machine Weight
    Note *Typically equipped with push block and ripper. - - -
    All-Wheel Drive (AWD) Weight 44613 lb - 36376 lb -
    Weight* 42325 lb - - -

    Blade Range
    Maximum Lift Above Ground 18.9 in 18.9 in 16.1 in 16.5 in
    Maximum Depth of Cut 28.9 in 28.1 in 30.5 in 23.3 in
    Circle Centershift - Right - 28.7 in 25.8 in 20.5 in
    Circle Centershift - Left - 27.4 in 25.8 in 25.6 in
    Moldboard Sideshift - Right - 26 in 26.1 in 31.1 in
    Moldboard Sideshift - Left - 20.1 in 20.2 in 29.1 in
    Maximum Blade Position Angle - 90° - -
    Blade Tip Range - Forward - 40° 40° 40°
    Blade Tip Range - Backward - 5° 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right - 77.9 in - 78.9 in
    Maximum Shoulder Reach Outside of Tires - Left - 70.5 in - 73.6 in

    Operating Specifications
    Top Speed - Forward - 29 mile/h - -
    Top Speed - Reverse - 23 mile/h - -
    Turning Radius - Outside Front Tires - 25.59 ft - -
    Steering Range - Left/Right - 50° - -
    Articulation Angle - Left/Right - 20° - -
    Forward - 1st - 2.5 mile/h - -
    Forward - 2nd - 3.4 mile/h - -
    Forward - 3rd - 5 mile/h - -
    Forward - 4th - 6.9 mile/h - -
    Forward - 5th - 10.6 mile/h - -
    Forward - 6th - 14.5 mile/h - -
    Forward - 7th - 19.9 mile/h - -
    Forward - 8th - 29 mile/h - -
    Reverse - 1st - 2 mile/h - -
    Reverse - 2nd - 3.7 mile/h - -
    Reverse - 3rd - 5.4 mile/h - -
    Reverse - 4th - 8.4 mile/h - -
    Reverse - 5th - 15.7 mile/h - -
    Reverse - 6th - 23 mile/h - -

    Power Train
    Forward/Reverse Gears - 8 Forward/6 Reverse - -
    Transmission - APECS, Direct Drive, Powershift - -
    Brakes - Service - Multiple Oil Disc - -
    Brakes - Service - Surface Area - 3565 in² - -
    Brakes - Parking - Multiple Oil Disc - -
    Brakes - Secondary - Dual Circuit - -

    Hydraulic System
    Circuit Type - Parallel - -
    Pump Type - Variable Piston - -
    Pump Output - 55.7 gal/min - -
    Maximum System Pressure - 3500 psi - -
    Reservoir Tank Capacity - 16.9 gal (US) - -
    Standby Pressure - 885 psi - -

    Frame
    Drawbar - Width - 3 in - -
    Circle - Diameter - 60.2 in - -
    Circle - Blade Beam Thickness - 1.6 in - -
    Drawbar - Height - 6 in - -
    Front Frame Structure - Height - 12.6 in - -
    Circle - Height - 5.4 in - -
    Front Frame Structure - Width - 12 in - -
    Drawbar - Thickness - 0.5 in - -
    Front-Top/Bottom Plate - Width - 12 in - -
    Front-Top/Bottom Plate - Thickness - 0.87 in - -
    Front Axle - Height to Center - 23.5 in - -
    Front Axle - Wheel Lean - Left/Right - 18° - 17.1°
    Front Axle - Total Oscillation per Side - 32° - 32°
    Circle - Outer Diameter - - - 71.7 in

    Ripper
    Ripping Depth - Maximum - 16.8 in - -
    Ripper Shank Holder Spacing - 21 in - -
    Ripper Shank Holders - 5 - -
    Penetration Force - 20812 lb - -
    Pry-Out Force - 27794 lb - -
    Machine Length Increase, Beam Raised - 40.6 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - 18.4 in - -
    Mid, V-Type - Scarifier Shank Holders - 11 - -
    Rear - Scarifying Depth, Maximum - 16.8 in - -
    Front, V-Type, 5 or 11 Tooth - Working Width - 40.6 in - -
    Front, V-Type - Working Width - 47.4 in - -
    Mid, V-Type - Working Width - 46.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum - 11.5 in - -
    Mid, V-Type - Scarifier Shank Holder Spacing - 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - 11-May - -
    Rear - Working Width - 84 in - -
    Rear - Scarifier Shank Holders - 9 - -
    Rear - Scarifier Shank Holder Spacing - 10.5 in - -

    Standards
    Brakes - ISO 3450 - -
    Sound - ISO 6394; ISO 6395 - -
    Steering - ISO 5010 - -
    ROPS/FOPS - ISO 3471/ISO 3449 - -

    Tandems
    Height - 19.9 in - -
    Width - 7.9 in - -
    Sidewall Thickness - Inner - 0.63 in - -
    Sidewall Thickness - Outer - 0.71 in - -
    Drive Chain Pitch - 2 in - -
    Wheel Axle Spacing - 60 in - -
    Tandem Oscillation - Front Up - 15° - -
    Tandem Oscillation - Front Down - 25° - -

    Service Refill Capacities
    Cooling System - - 10.3 gal (US) 15.9 gal (US)
    Circle Drive without Slip Clutch - - 0.4 gal (US) -
    Hydraulic System - - 14.5 gal (US) 33 gal (US)
    Circle Drive with Slip Clutch - - 1.8 gal (US) -
    Transmission - - 4.5 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 3.2 gal (US) 5.8 gal (US)
    Fuel Tank - - 71 gal (US) 109.9 gal (US)
    Engine Crankcase - - 2 gal (US) -
    Transmission and Differential - - - 23.5 gal (US)
    Circle Drive - - - 1.8 gal (US)

    Sustainability
    Recyclability - - 92% -

    Air Conditioning System
    Air Conditioning - - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
    Add a Similar Product: