CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    120 - 2019 - N Am, Global
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP - -
    Net Power - ISO 9249/SAE J1349 250 HP - -
    Standard Capability 109 °F 122 °F -
    Engine RPM 2,000 2,000 -
    Engine Model Cat C9.3 Cat 7.1 -
    Bore 4.5 in 4.1 in -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA -
    Displacement 567.5 in³ 427.8 in³ -
    Stroke 5.9 in 5.3 in -
    Number of Cylinders 6 6 -
    Torque Rise - ISO 9294 44% 42% -
    Note (2) - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Derating Altitude - 9842.5 ft -
    Maximum Torque - ISO 9249 - 606 lb/ft -
    All-Wheel Drive Net Power Range (Tier 3) - 130 HP -
    Net Power Range (Tier 3) - 130 HP -
    Note (3) - Power as declared per ISO 14396 -
    Maximum Torque - AWD On - 611 lb/ft -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." -
    Derating Altitude (AWD) - 5499 ft -

    Weights
    Operating Weight - Typically Equipped 20236 lb 35067 lb -

    Moldboard
    Blade Width 12 ft 12 ft -
    Cutting Edge 6 in 6 in -
    Arc Radius 16.3 in 16.3 in -
    Throat Clearance 6.5 in 4.1 in -
    End Bit 6 in 6 in -
    Blade Height - 24 in -

    Dimensions
    Basic Blade Width 140 in 12 ft -
    Length of Machine* 397.6 in 387 in -
    Width 97.6 in 102 in -
    Note *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. -
    Maximum Height 132 in 136.4 in -
    Width All Wheel Drive (AWD) - 2551 mm -

    Service Refill
    Hydraulic System 14.5 gal (US) - -
    Engine Crankcase 7.9 gal (US) - -
    Circle Drive 1.8 gal (US) - -
    Fuel Tank 100 gal (US) - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - -

    Machine Weight
    Note *Typically equipped with push block and ripper. - -
    All-Wheel Drive (AWD) Weight 44613 lb - -
    Weight* 42325 lb - -
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731 lb -
    Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. -
    Joystick Weight* Tier 4 - 35358 lb -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846 lb -
    Lever/Steering Wheel Weight* Tier 4 - 35067 lb -

    Blade Range
    Maximum Lift Above Ground 18.9 in 16.1 in -
    Maximum Depth of Cut 28.9 in 30.5 in -
    Blade Tip Range Forward - 40 -
    Maximum Shoulder Reach Right - 76 in -
    Moldboard Side Shift Right - 26.1 in -
    Maximum Shoulder Reach Left - 69.4 in -
    Moldboard Side Shift Left - 20.1 in -
    Circle Center Shift Left - 26 in -
    Blade Tip Range Backward - 5 -
    Circle Center Shift Right - 26 in -

    Service Refill Capacities
    Transmission and Differential - 9 gal (US) -
    Circle Drive - 1.8 gal (US) -
    Fuel Tank - 65 gal (US) -
    Cooling System - 14 gal (US) -
    Engine Crankcase - 4.8 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5 gal (US) -
    Hydraulic System - 25.6 gal (US) -

    Air Conditioning System
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. -
    Add a Similar Product: