CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140/140 AWD Motor Grader
    View Product
    16 Motor Grader
    View Product Remove
    120 - 2019 - N Am, Global
    View Product Remove
    140 Motor Grader LVR
    View Product Remove

    Engine
    Net Power Range (Tier 4) 179 HP - - -
    Engine Model Cat® C9.3 Cat® C13 Cat 7.1 Cat C9.3
    Bore 4.5 in 5.1 in 4.1 in 4.5 in
    Stroke 5.9 in 6.2 in 5.3 in 5.9 in
    Speed at Rated Power 2,000 rpm 2,000 rpm - -
    Standard Capability 109 °F - 122 °F 109 °F
    Maximum Torque - VHP Plus 840 lb/ft - - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 HP - - -
    VHP Plus - Gear - Net Power - Forward 2nd 189 HP - - -
    VHP Plus - Gear - Net Power - Forward 5th 215 HP - - -
    VHP Plus - Gear - Net Power - Forward 3rd 200 HP - - -
    VHP Plus - Gear - Net Power - Forward 8th 231 HP - - -
    Torque Rise 38% - - -
    VHP Plus - Gear - Net Power - Reverse 2nd 189 HP - - -
    VHP Plus - Gear - Net Power - Forward 1st 179 HP - - -
    VHP Plus - Gear - Net Power - Forward 6th 220 HP - - -
    VHP Plus - Gear - Net Power - Reverse 1st 179 HP - - -
    VHP Plus Range - Net 133-172 kW (179-231 hp) - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V
    VHP Plus - Gear - Net Power - Forward 7th 225 HP - - -
    VHP Plus Range - Net - Metric 133-172 kW (181-234 hp) - - -
    VHP Plus - Gear - Net Power - Forward 4th 210 HP - - -
    Base Power (1st Gear) - Net - Metric 181 HP 294 HP - -
    High Ambient - Fan Speed - Standard 1,400 rpm - - -
    Displacement 567.5 in³ 763 in³ 427.8 in³ 567.5 in³
    Number of Cylinders 6 6 6 6
    Derating Altitude 10000 ft - 9842.5 ft -
    High Ambient - Fan Speed - Maximum 1,550 rpm - - -
    High Ambient - Fan Speed - Minimum 500 rpm - - -
    High - Ambient Capability 122 °F - - -
    Base Power (1st Gear) - Net - 290 HP - -
    Optimized VHP Range - Net - 216-259 kW (290-348 hp) - -
    Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 12176 ft - -
    Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 1270 lb/ft - -
    Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4) - 1306 lb/ft - -
    Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 1270 lb/ft - -
    Emissions (2) - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country - -
    Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4) - 43% - -
    Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent - 39% - -
    Standard - Ambient Capability - 122 °F - -
    Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 12973 ft - -
    VHP Range - Net - Metric - 216-259 kW (294-353 hp) - -
    Standard - Fan Speed - Minimum - 550 rpm - -
    Standard - Fan Speed - Maximum - 1,450 rpm - -
    Emissions (3) - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country - -
    Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent - 39% - -
    Emissions (1) - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) - -
    VHP Range - Net - 216-259 kW (290-348 hp) - -
    Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4) - 12500 ft - -
    Note (2) - - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Maximum Torque - ISO 9249 - - 606 lb/ft -
    All-Wheel Drive Net Power Range (Tier 3) - - 130 HP -
    Net Power Range (Tier 3) - - 130 HP -
    Note (3) - - Power as declared per ISO 14396 -
    Engine RPM - - 2,000 2,000
    Maximum Torque - AWD On - - 611 lb/ft -
    Note (1) - - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." -
    Derating Altitude (AWD) - - 5499 ft -
    Torque Rise - ISO 9294 - - 42% 44%
    Net Power - EEC 80/1269 - - - 250 HP
    Net Power - ISO 9249/SAE J1349 - - - 250 HP

    Weights
    Operating Weight - Typically Equipped 42647 lb 71454 lb 35067 lb 20236 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - - -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - - -
    Operating Weight - Typically Equipped - Front Axle 12055 lb - - -
    Operating Weight - Typically Equipped - Rear Axle 30592 lb - - -
    Gross Vehicle Weight - Base - Front Axle 9343 lb - - -
    Gross Vehicle Weight - Base - Rear Axle 28077 lb - - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - - -
    Gross Vehicle Weight - Base - Total 37420 lb - - -
    Operating Weight - Typically Equipped - Total 42647 lb - - -

    Moldboard
    Blade Width 12 ft 16 ft 12 ft 12 ft
    Moldboard - Height 24 in - - -
    Moldboard - Thickness 0.87 in - - -
    Arc Radius 16.3 in 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 5 in 4.1 in 6.5 in
    Cutting Edge Width 6 in 8 in - -
    Cutting Edge Thickness 0.6 in 1 in - -
    End Bit - Width 6 in 6 in - -
    End Bit - Thickness 0.6 in 0.75 in - -
    Blade Pull - Base GVW 25269 lb - - -
    Blade Pull - Maximum GVW 34262 lb - - -
    Blade Down Pressure - Base GVW 16038 lb - - -
    Blade Down Pressure - Maximum GVW 29309 lb - - -
    Moldboard - Blade Width 12 ft - - -
    Note - *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight. - -
    Thickness - 1 in - -
    Blade Pull* - Base GVW - 41039 lb - -
    Down Force - Maximum GVW - 43861 lb - -
    Height - 31 in - -
    Width - 16 ft - -
    Down Force - Base GVW - 30743 lb - -
    Blade Pull* - Maximum GVW - 52878 lb - -
    Blade Height - - 24 in -
    End Bit - - 6 in 6 in
    Cutting Edge - - 6 in 6 in

    Operating Specifications
    Top Speed - Forward 29 mile/h 32.1 mile/h - -
    Top Speed - Reverse 23 mile/h 25.4 mile/h - -
    Turning Radius - Outside Front Tires 25.59 ft 30.5 ft - -
    Steering Range - Left/Right 50° 47.5° - -
    Articulation Angle - Left/Right 20° 20° - -
    Forward - 1st 2.5 mile/h 2.8 mile/h - -
    Forward - 2nd 3.4 mile/h 3.8 mile/h - -
    Forward - 3rd 5 mile/h 5.5 mile/h - -
    Forward - 4th 6.9 mile/h 7.6 mile/h - -
    Forward - 5th 10.6 mile/h 11.8 mile/h - -
    Forward - 6th 14.5 mile/h 16 mile/h - -
    Forward - 7th 19.9 mile/h 22 mile/h - -
    Forward - 8th 29 mile/h 32.1 mile/h - -
    Reverse - 1st 2 mile/h 2.2 mile/h - -
    Reverse - 2nd 3.7 mile/h 4.1 mile/h - -
    Reverse - 3rd 5.4 mile/h 6 mile/h - -
    Reverse - 4th 8.4 mile/h 9.3 mile/h - -
    Reverse - 5th 15.7 mile/h 17.4 mile/h - -
    Reverse - 6th 23 mile/h 25.3 mile/h - -
    Note - Calculated with no slip and 23.5 R25 L-3 tires. - -

    Service Refill
    Fuel Capacity 104 gal (US) 131 gal (US) - -
    Cooling System 15 gal (US) 18.5 gal (US) - -
    Hydraulic System - Total 26.4 gal (US) 38.6 gal (US) - -
    Hydraulic System - Tank 16.9 gal (US) 18.5 gal (US) - -
    Diesel Exhaust Fluid 5.8 gal (US) - - -
    Transmission - Differential - Final Drives 18.5 gal (US) 34 gal (US) - -
    Engine Oil 7.9 gal (US) 9.5 gal (US) - -
    Tandem Housing - Each 20 gal (US) 34 gal (US) - -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) 0.24 gal (US) - -
    Circle Drive Housing 1.8 gal (US) 2.6 gal (US) - -
    DEF Tank - 4.2 gal (US) - -
    Hydraulic System - - - 14.5 gal (US)
    Engine Crankcase - - - 7.9 gal (US)
    Circle Drive - - - 1.8 gal (US)
    Fuel Tank - - - 100 gal (US)
    Front Wheel Spindle Bearing - Each - - - 0.13 gal (US)

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse 8 Forward/6 Reverse - -
    Transmission APECS, Direct Drive, Powershift Direct drive, power shift, countershaft - -
    Brakes - Service Multiple Oil Disc Oil-actuated, oil disc - -
    Brakes - Service - Surface Area 3565 in² - - -
    Brakes - Parking Multiple Oil Disc Spring applied, hydraulically released - -
    Brakes - Secondary Dual Circuit Oil-actuated, oil-disc - -
    Brakes - Dynamic Brake Torque per Wheel - 27069.27 lb/ft - -

    Hydraulic System
    Circuit Type Parallel Electro-hydraulic load sensing, closed center - -
    Pump Type Variable Piston Variable piston - -
    Pump Output 55.7 gal/min - - -
    Maximum System Pressure 3500 psi 3590 psi - -
    Reservoir Tank Capacity 16.9 gal (US) - - -
    Standby Pressure 885 psi 856 psi - -
    Pump Output* - 74 gal/min - -
    Note - *Pump output measured at 2,150 rpm. - -

    Frame
    Drawbar - Width 3 in 3 in - -
    Circle - Diameter 60.2 in 71.7 in - -
    Circle - Blade Beam Thickness 1.6 in 2 in - -
    Drawbar - Height 6 in 8 in - -
    Front Frame Structure - Height 12.6 in 18.1 in - -
    Circle - Height 5.4 in - - -
    Front Frame Structure - Width 12 in 14 in - -
    Drawbar - Thickness 0.5 in - - -
    Front-Top/Bottom Plate - Width 12 in - - -
    Front-Top/Bottom Plate - Thickness 0.87 in - - -
    Front Axle - Height to Center 23.5 in 26.4 in - -
    Front Axle - Wheel Lean - Left/Right 18° - - -
    Front Axle - Total Oscillation per Side 32° 35° - -
    Front Frame Structure - Thickness - 0.6 in - -
    Front Axle - Wheel Lean - 18° Left/17° Right - -

    Blade Range
    Circle Centershift - Right 28.7 in 22 in - -
    Circle Centershift - Left 27.4 in 27.2 in - -
    Moldboard Sideshift - Right 26 in 31.1 in - -
    Moldboard Sideshift - Left 20.1 in 29.1 in - -
    Maximum Blade Position Angle 90° 65° - -
    Blade Tip Range - Forward 40° 40° - -
    Blade Tip Range - Backward 5° 5° - -
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in 91 in - -
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in 91 in - -
    Maximum Lift Above Ground 18.9 in 15.7 in 16.1 in 18.9 in
    Maximum Depth of Cut 28.1 in 18.5 in 30.5 in 28.9 in
    Blade Tip Range Forward - - 40 -
    Maximum Shoulder Reach Right - - 76 in -
    Moldboard Side Shift Right - - 26.1 in -
    Maximum Shoulder Reach Left - - 69.4 in -
    Moldboard Side Shift Left - - 20.1 in -
    Circle Center Shift Left - - 26 in -
    Blade Tip Range Backward - - 5 -
    Circle Center Shift Right - - 26 in -

    Ripper
    Ripping Depth - Maximum 16.8 in 17.8 in - -
    Ripper Shank Holder Spacing 21 in - - -
    Ripper Shank Holders 5 7 - -
    Penetration Force 20812 lb 30311 lb - -
    Pry-Out Force 27794 lb 43700 lb - -
    Machine Length Increase, Beam Raised 40.6 in 63.4 in - -
    Shank Holder Spacing - Minimum - 17.5 in - -
    Shank Holder Spacing - Maximum - 20 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - - -
    Mid, V-Type - Scarifier Shank Holders 11 - - -
    Rear - Scarifying Depth, Maximum 16.8 in - - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - - -
    Front, V-Type - Working Width 47.4 in - - -
    Mid, V-Type - Working Width 46.6 in - - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - - -
    Rear - Working Width 84 in - - -
    Rear - Scarifier Shank Holders 9 - - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - - -

    Standards
    Brakes ISO 3450 ISO 3450:2011 - -
    Sound ISO 6394; ISO 6395 ISO 6394:2008/ISO 6395:2008/ISO 6396:2008 - -
    Steering ISO 5010 ISO 5010:2007 - -
    ROPS/FOPS ISO 3471/ISO 3449 ISO 3471:2008/ISO 3449:2005 - -
    Note (1) - The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - -
    Note (2) - The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the - -

    Tandems
    Height 19.9 in 25.5 in - -
    Width 7.9 in 9.3 in - -
    Sidewall Thickness - Inner 0.63 in 0.9 in - -
    Sidewall Thickness - Outer 0.71 in 0.9 in - -
    Drive Chain Pitch 2 in 2.5 in - -
    Wheel Axle Spacing 60 in 72.5 in - -
    Tandem Oscillation - Front Up 15° 15° - -
    Tandem Oscillation - Front Down 25° 25° - -

    Dimensions
    Height - Top of Cab 130 in - - -
    Length - Counterweight to Ripper 399 in - - -
    Width - Outside Front Tires 98.9 in - - -
    Length - Front Axle to Mid Tandem 241 in - - -
    Length - Front Tire to Rear of Machine 351 in - - -
    Length - Front Axle to Moldboard 100 in - - -
    Length - Between Tandem Axles 60 in - - -
    Width - Outside Rear Tires 98.9 in - - -
    Width - Tire Center Lines 84.3 in - - -
    Height - Front Axle Center 23.5 in - - -
    Height - Exhaust Stack 128 in - - -
    Height - Top of Cylinders 120 in - - -
    Ground Clearance - Rear Axle 13.3 in - - -
    Maximum Height - - 136.4 in 132 in
    Length of Machine* - - 387 in 397.6 in
    Width All Wheel Drive (AWD) - - 2551 mm -
    Width - - 102 in 97.6 in
    Note - - *Typically equipped with push block and ripper. *Typically equipped with push block and ripper.
    Basic Blade Width - - 12 ft 140 in

    Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
    Gross Vehicle Weight - Maximum Tested - Total - 84877 lb - -
    Gross Vehicle Weight - Base** - Total - 63528 lb - -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 52201 lb - -
    Gross Vehicle Weight - Typically Equipped - Total - 71454 lb - -
    Gross Vehicle Weight - Maximum Tested - Front Axle - 26125 lb - -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 19253 lb - -
    Gross Vehicle Weight - Maximum Tested - Rear Axle - 58753 lb - -
    Gross Vehicle Weight - Base** - Front Axle - 17932 lb - -
    Gross Vehicle Weight - Base** - Rear Axle - 45596 lb - -
    Note (1) - *For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight. - -
    Note (2) - **Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab. - -

    Dimensions (Approximate)
    Ground Clearance - Rear Axle - 15.6 in - -
    Length - Counterweight to Ripper - 474.4 in - -
    Length - Front Axle to Moldboard - 120.7 in - -
    Length - Front Axle to Mid Tandem - 290 in - -
    Height - Top of Cylinders - 121.6 in - -
    Width - Tire Center Lines - 106.4 in - -
    Width - Outside Rear Tires - 134.3 in - -
    Length - Between Tandem Axles - 72.5 in - -
    Height - Top of Cab - 146.4 in - -
    Width - Outside Front Tires - 134.3 in - -
    Height - Front Axle Center - 28.9 in - -
    Length - Front Tire to Rear of Machine - Including Tow Hitch - 417 in - -
    Height - Exhaust Stack - 140 in - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
    Gear - Reverse 3rd-6th - 298 HP - -
    Gear - Forward 8th - 348 HP - -
    Gear - Forward 3rd - 298 HP - -
    Gear - Forward 6th - 320 HP - -
    Gear - Forward 5th - 311 HP - -
    Gear - Reverse 1st - 290 HP - -
    Gear - Reverse 2nd - 290 HP - -
    Gear - Forward 4th - 304 HP - -
    Gear - Forward 7th - 328 HP - -
    Gear - Forward 1st - 290 HP - -
    Gear - Forward 2nd - 290 HP - -

    Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
    Gear - Forward 4th - 309 HP - -
    Gear - Reverse 1st - 294 HP - -
    Gear - Forward 3rd - 302 HP - -
    Gear - Reverse 3rd-6th - 302 HP - -
    Gear - Reverse 2nd - 294 HP - -
    Gear - Forward 7th - 332 HP - -
    Gear - Forward 6th - 325 HP - -
    Gear - Forward 8th - 353 HP - -
    Gear - Forward 1st - 294 HP - -
    Gear - Forward 5th - 315 HP - -
    Gear - Forward 2nd - 294 HP - -

    Optional Tire Arrangements
    Wheel Group - 19.5×25 MP (1) - Tires: 23.5R25 Bridgestone VKT 2 Star - -
    Wheel Group - 19.5×25 MP (2) - Tires: 23.5R25 Bridgestone VKT 1 Star - -
    Wheel Group - 19.5×25 MP (3) - Tires: 23.5R25 Bridgestone VJT 1 Star - -
    Wheel Group - 19.5×25 MP (4) - Tires: 23.5R25 Michelin XHA 2 Star - -
    Wheel Group - 19.5×25 MP (5) - Tires: 23.5R25 Michelin XLDD 2 Star L5 - -

    Service Refill Capacities
    Transmission and Differential - - 9 gal (US) -
    Circle Drive - - 1.8 gal (US) -
    Fuel Tank - - 65 gal (US) -
    Cooling System - - 14 gal (US) -
    Engine Crankcase - - 4.8 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - 5 gal (US) -
    Hydraulic System - - 25.6 gal (US) -

    Machine Weight
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - - 36731 lb -
    Note (1) - - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. -
    Joystick Weight* Tier 4 - - 35358 lb -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - - 36846 lb -
    Lever/Steering Wheel Weight* Tier 4 - - 35067 lb -
    Note - - - *Typically equipped with push block and ripper.
    All-Wheel Drive (AWD) Weight - - - 44613 lb
    Weight* - - - 42325 lb

    Air Conditioning System
    Note - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. -
    Add a Similar Product: