CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    7295 Electric Rope Shovel
    View Product
    7495 HF Electric Rope Shovel
    View Product Remove
    7495 HD Electric Rope Shovel
    View Product Remove

    Dimensions
    Dipper Payload 50 t 120 t 90 t
    Dipper Capacity 19.1-38.2 m3 (25-50 yd3) 30.6-62.7 m3 (40-82 yd3) 27.5-60.4 m3 (36-79 yd3)
    Note Dependent on application and material density. Dependent on application and material density Dependent on application and material density.
    Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) - 120 t -

    Weights
    Working Weight - With Dipper and Standard Links 1748837 lb 3164000 lb 2856700 lb
    Ballast - Furnished By Customer 352000 lb 667150 lb 574000 lb
    Note (1) These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection These weights will vary slightly depending upon dipper and optional equipment selection.
    Note (2) All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers. All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.

    Main Structures
    Ground Bearing Pressure Ground bearing pressure is dependent upon many factors. - Ground bearing pressure is dependent upon many factors.
    Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard 28.22 in - -
    Ground Bearing Pressure - 182.9 cm (72 in) Treads 39 in - -
    Upper Works Overall Width - Including Standard Walkways 41.33 in 41.99 in 44.25 ft
    Planetary Propel Dual-motor independent drive. Dual-motor independent drive Dual-motor independent drive.
    Swing Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
    Ground Bearing Pressure - Total Effective Bearing Area 315.6 ft² - -
    Hoist A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
    Crawler Dimensions - Overall Width 317.5 cm (125 in) Treads - 41.67 in -
    Ground Bearing Pressure - Note - Ground bearing pressure is dependent upon many factors -
    Ground Bearing Pressure - Total Effective Bearing Area (317.5 cm/125 in) Treads - 57 m2 (248 kPa); 614 ft2 (36 psi) -
    Ground Bearing Pressure - Total Effective Bearing Area (1) - - 343 ft²
    Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads - - 34.75 ft
    Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard - - 58 psi
    Ground Bearing Pressure - Total Effective Bearing Area (2) - - 442 ft²
    Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard - - 32.75 ft
    Ground Bearing Pressure - 274.3 cm (108 in) Treads - - 46 psi

    Optimal Working Ranges*
    Dumping Height - With Clearance to Open Dipper Door 27.56 ft - 30.84 ft
    Cutting Radius - Maximum 67.59 ft - 74.75 ft
    Revolving Frame Tail Swing Radius 25.59 in - 30.51 ft
    Radius of Level Floor 48.88 ft - 52.49 ft
    Cutting Height - Maximum 45 ft - 48.75 ft
    Note (1) Optimal working ranges based on loading a Cat® 785D truck. - Optimal working ranges based on loading a Cat® 793F truck.
    Note (2) *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. - *All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.

    Lube System
    Type Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease Automatic, single-line system for open gear lubricant and grease.
    Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
    Components (2) External fast fill from lower level. External fast fill from lower level External fastfill from lower level.

    Electrical
    Power Requirements - 60 Hz 4,160V, 7,200V 7,200V, 13,800V 7,200V
    Power Requirements - Peak power 2886 HP 3778 kW 4466 HP
    Drive IGBT Acutrol drive system. IGBT Acutrol drive system IGBT Acutrol drive system.
    Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V
    Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V 6,000V, 6,600V, 7,200V, 11,000V 6,000V, 6,600V, 7,200V, 11,000V
    Power Requirements - Average Power Demand 538-753 kW (721-1,010 hp) 945-1322 kW 832-1165 kW (1,116-1,562 hp)
    Note Other voltages available to suit customer requirements. Other voltage options available to suit customer requirements Other voltage options available to suit customer requirements.
    System Voltage - Nominal - 50/60 Hz, 7,200V -

    Front End
    Standard Rope Data - Retract - Diameter 2.25 in - -
    Standard Rope Data - Dipper Trip - Diameter 0.625 in - -
    Standard Rope Data - Boom Suspension - No. 4 - -
    Standard Rope Data - Crowd - No. 1 - -
    Standard Rope Data - Boom Suspension - Diameter 2.75 in - -
    Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
    Standard Rope Data - Retract - No. 1 - -
    Standard Rope Data - Hoist - Diameter 2.375 in - -
    Standard Rope Data - Crowd - Diameter 2.25 in - -
    Standard Rope Data - Dipper Trip - No. 1 - -
    Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. - Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
    Standard Rope Data - Hoist - No. 2 - -
    Note High impact ropes available as an option - -
    Rope Data - Note - High impact ropes available as an option High impact ropes available as an option.
    Rope Data - Hoist - No. - 2 2
    Rope Data - Hoist - Diameter - 2.75 in 2.75 in
    Rope Data - Dipper Trip - No. - 1 1
    Rope Data - Boom Suspension - Diameter - 3.25 in 3.25 in
    Rope Data - Dipper Trip - Diameter - 0.75 in 0.625 in
    Rope Data - Boom Suspension - No. - 4 4
    Crowd (1) - HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft. -
    Crowd (2) - (Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. -
    Rope Data - Crowd - Diameter - - 2.5 in
    Rope Data - Retract - Diameter - - 2.5 in
    Rope Data - Crowd - No. - - 1
    Rope Data - Retract - No. - - 1

    Dimensions - Working Ranges
    Operating Weight - 3164000 lb -
    Dipper Payload - 120 ton (US) -
    Maximum Dumping Height - 29.53 ft -
    Dipper Capacities - 30.6-62.7 m3 (40-82 yd3) -

    Dimensions (Approximate) - Optimal Working Ranges*
    Radius of Level Floor - 55.77 ft -
    Cutting Height - Maximum - 55 ft -
    Dumping Height - With Clearance to Open Dipper Door - 29.53 ft -
    Revolving Frame Tail Swing Radius - 30.51 ft -
    Cutting Radius - Maximum - 79.72 ft -
    Note (1) - Optimal working ranges based on loading a Cat 797F truck. -
    Note (2) - *All specifications are based on a 45 m3 (59 yd3) dipper and standard 317.5 cm (125 in) crawlers. -
    Add a Similar Product:
    • 7395 Electric Rope Shovel Add
    • 7495 HF Electric Rope Shovel Add
    • 7495 Electric Rope Shovel Add
    • 7495 Electric Rope Shovel Add