These weights will vary slightly depending upon dipper and optional equipment selection.
These weights will vary slightly depending upon dipper and optional equipment selection.
-
Note (2)
All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.
All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
-
Main Structures
Ground Bearing Pressure
Ground bearing pressure is dependent upon many factors.
Ground bearing pressure is dependent upon many factors.
-
Ground Bearing Pressure - Total Effective Bearing Area (1)
343 ft²
343 ft²
-
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads
34.75 ft
34.75 ft
-
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard
58 psi
54 psi
-
Ground Bearing Pressure - Total Effective Bearing Area (2)
442 ft²
442 ft²
-
Hoist
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
-
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard
32.75 ft
32.75 ft
-
Swing
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
-
Ground Bearing Pressure - 274.3 cm (108 in) Treads
46 psi
43 psi
-
Upper Works Overall Width - Including Standard Walkways
44.25 ft
44.25 ft
-
Planetary Propel
Dual-motor independent drive.
Dual-motor independent drive.
-
Optimal Working Ranges*
Radius of Level Floor
52.49 ft
52.49 ft
-
Dumping Height - With Clearance to Open Dipper Door
30.84 ft
30.84 ft
-
Cutting Height - Maximum
48.75 ft
48.75 ft
-
Revolving Frame Tail Swing Radius
30.51 ft
30.51 ft
-
Cutting Radius - Maximum
74.75 ft
74.75 ft
-
Note (1)
Optimal working ranges based on loading a Cat® 793F truck.
Optimal working ranges based on loading a Cat® 793F truck.
-
Note (2)
*All specifications are based on a 32 m3 (42 yd3) dipper and standard 213.4 cm (84 in) treads.
*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
-
Lube System
Type
Automatic, single-line system for open gear lubricant and grease.
Automatic, single-line system for open gear lubricant and grease.
-
Components (1)
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
-
Components (2)
External fastfill from lower level.
External fast fill from lower level.
-
Electrical
Power Requirements - 60 Hz
7,200V
7,200V
-
Power Requirements - 50 Hz
6,000V, 6,600V, 7,200V, 11,000V
6,000V, 6,600V, 7,200V, 11,000V
-
Power Requirements - Peak power
4466 HP
4165 HP
-
Power Requirements - Voltage
3 phase, 50/60 Hz, 7,200V
3 phase, 50/60 Hz, 7,200V
-
Power Requirements - Average Power Demand
832-1165 kW (1,116-1,562 hp)
777-1087 kW (1,042-1,458 hp)
-
Drive
IGBT Acutrol drive system.
IGBT Acutrol drive system.
-
Note
Other voltage options available to suit customer requirements.
Other voltages available to suit customer requirements.
-
Front End
Rope Data - Boom Suspension - Diameter
3.25 in
3.25 in
-
Rope Data - Dipper Trip - Diameter
0.625 in
0.625 in
-
Rope Data - Hoist - No.
2
2
-
Rope Data - Note
High impact ropes available as an option.
-
-
Rope Data - Crowd - Diameter
2.5 in
2.5 in
-
Rope Data - Retract - Diameter
2.5 in
2.5 in
-
Rope Data - Crowd - No.
1
1
-
Rope Data - Hoist - Diameter
2.75 in
2.75 in
-
Components
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
-
Rope Data - Boom Suspension - No.
4
4
-
Rope Data - Retract - No.
1
1
-
Crowd
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
