CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D11 Dozer
    View Product
    814 Wheel Dozer
    View Product Remove
    D9 Dozer
    View Product Remove
    D3 Track-Type Tractor
    View Product Remove

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat® C32 - Cat® C18 -
    Engine Power - Net SAE J1349/ISO 9249 - Forward 850 HP - - -
    Displacement 1959 in³ - 1106 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse 955 HP - - -
    Note (1) *Excludes all fan losses. - All Engine ratings apply at 1,750 rpm. -
    Note (2) Engine ratings apply at 1,800 rpm. - No derating required up to 2499 m (8,200 ft). -
    Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - - -
    Bore - - 5.7 in³ -
    Stroke - - 7.2 in³ -
    Engine Power - Gross SAE J1995 - - 477 HP -
    Engine Power - ISO 14396 - - 468 HP -
    Engine Power - Net SAE J1349/ISO 9249 - - 440 HP -
    Emissions - - U.S. EPA Tier 4 / EU Stage V -

    Weights
    Operating Weight 229800 lb - 110225 lb 20640 lb
    Operating Weight - Carrydozer 250665 lb - - -
    Note (1) D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. - D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Note (2) D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. - D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. For machine with ripper, add 554 kg (1,222 lb).
    Shipping Weight - - 84373 lb -
    Operating Weight - LGP - - - 21369 lb
    Operating Weight - LGP, 762 mm/30 in - - - 21810 lb

    Blades
    Semi-Universal (SU)* Capacity 35.6 yd³ - - -
    Semi-Universal (SU)* Width Over Endbits 219.8 in - - -
    U-Blade Capacity 45 yd³ - - -
    U-Blade Width 249.6 in - - -
    Reclamation Universal - Blade capacity (SAE J1265) 55 yd³ - - -
    Reclamation Universal - Width with blade (over end bits) 251.8 in - - -
    Carry Dozer - Blade capacity (SAE J1265) 57 yd³ - - -
    Carry Dozer - Width with blade (over end bits) 263.9 in - - -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model Cat® C32 - - -
    Displacement 1959 in³ - - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward 850 HP - - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse 957 HP - - -
    Note (1) *Excludes all fan losses. - - -
    Note (2) Engine ratings apply at 1,800 rpm. - - -
    Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - - -

    Fuel Tank Capacities
    Fuel Tank - Total Volume 500 gal (US) - - -
    Fuel Tank - Usable Volume 475 gal (US) - - -

    Hydraulic Controls
    Pump Type Variable displacement piston pump - Piston-type geared to flywheel -
    Combined Pump Output - Implement 177 gal/min - - -
    Pump Output - Steering - - 96 gal/min -
    Fan Pump - - 21 gal/min -
    Tilt Cylinder Flow - Rod End Flow - - 53 gal/min -
    Tilt Cylinder Flow - Head End Flow - - 53 gal/min -
    Lift Cylinder Relief Valve Setting - - 3800 lbf/in -
    Tilt Cylinder Relief Valve Setting - - 2799 psi -
    Ripper - Lift - Relief Valve Setting - - 3800 psi -
    Ripper - Pitch - Relief Valve Setting - - 3800 psi -
    Steering System - Pressure - - 5874 psi -
    Tank Capacity - - 24 gal/min -
    Note (1) - - Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). -
    Note (2) - - Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). -
    Note (3) - - Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) -
    Pump Output - - - 17.2 gal/min
    Relief Valve Settings - - - 2988 psi

    Undercarriage
    Shoe Type Extreme Service - Extreme Service -
    Width - Shoe 28 in - 24 in -
    Width - Shoe - CD 36 in - - -
    Shoes/Side 41 - 43 -
    Grouser Height 4 in - 3.3 in -
    Pitch 12.5 in - 9.4 in -
    Ground Clearance* 30.6 in - - -
    Track Gauge 114 in - 88.6 in 63 in
    Length - Track on Ground 175 in - 136.6 in -
    Ground Contact Area 9781 in² - 45.6 ft² -
    Ground Contact Area - CD 12605 in² - - -
    Track Rollers/Side 8 - 8 -
    Number of Carrier Rollers 1 per side (optional) - 1 per side (optional) -
    Ground Clearance - - 18.1 in -
    Ground Pressure - LGP - - - 4.5 psi
    Track Gauge - LGP - - - 69 in
    Length - Track on Ground - LGP - - - 91 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - - 40
    Ground Pressure - LGP, 762 mm (30 in) - - - 3.9 psi
    Length - Track on Ground - LGP, 762 mm (30 in) - - - 91 in
    Shoe Width - LGP - - - 26 in
    Shoe Width - LGP, 762 mm (30 in) - - - 30 in
    Number of Rollers - Each Side - - - 7
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    Ground Pressure - - - 5.7 psi
    Length of Track on Ground - - - 91 in
    Number of Shoes - Each Side - Abrasion Undercarriage - - - 36
    Shoe Width - Standard - - - 20 in

    Transmission
    1.0 Forward 2.5 mile/h - 2.2 mile/h -
    2.0 Forward 4.4 mile/h - 3.9 mile/h -
    3.0 Forward 7.6 mile/h - 6.8 mile/h -
    1.0 Reverse 3 mile/h - 2.7 mile/h -
    2.0 Reverse 5.3 mile/h - 4.8 mile/h -
    3.0 Reverse 9.1 mile/h - 8.4 mile/h -
    Drawbar Pull - 3 Forward 46250 ft·lbf - - -
    Drawbar Pull - 1 Forward 148200 ft·lbf - - -
    Drawbar Pull - 2 Forward 82300 ft·lbf - - -
    Transmission Type - Cat Planetary Power Shift - -
    Forward - 1 - 3.7 mile/h - -
    Forward - 2 - 6.5 mile/h - -
    Forward - 3 - 11.2 mile/h - -
    Forward - 4 - 19.4 mile/h - -
    Reverse - 1 - 4.2 mile/h - -
    Reverse - 2 - 7.3 mile/h - -
    Reverse - 3 - 12.8 mile/h - -
    Reverse - 4 - 22.1 mile/h - -
    Type - - Planetary powershift -
    Drive Pumps - - - 1
    Maximum Travel Speed - Forward - - - 5.6 mile/h
    Maximum Travel Speed - Reverse - - - 6.2 mile/h
    Track Motors - - - 2
    Relief Valve Settings - - - 7033 psi

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) 66000 lb - 35520 lbf -
    Maximum penetration depth (standard tip) 63.5 in - 48.5 in -
    Pryout Force 148510 lb - 74637 lbf -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.7 in -
    Number of Pockets - - 1 -
    Weight - - 10701 lb -
    Total Operating Weight* (with SU Blade and noted ripper) - - 110205 lb -
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) 66110 lb - 38667 lbf -
    Maximum penetration depth (standard tip) 85.5 in - 68 in -
    Pryout Force 148510 lb - 74412 lbf -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 32.2 in -
    Number of Pockets - - 1 -
    Weight - - 10981 lb -
    Total Operating Weight* (with SU Blade and noted ripper) - - 110485 lb -
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width 131.1 in - - -
    Maximum Penetration Force - Shank Vertical 77350 lb - 34621 lbf -
    Maximum Penetration - Standard Tip 43.3 in - 31.4 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth 145640 lb - 81156 lbf -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.6 in -
    Number of Pockets - - 3 -
    Weight - - 12136 lb -
    Total Operating Weight* - With SU-Blade and Ripper - - 111739 lb -
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) 149.8 in - - -
    Length with SU-Blade** - No rear attachment 345.1 in - - -
    Overall Length SU-Blade and SS Ripper** 421.7 in - - -

    Service Refill Capacities
    Cooling System 46.8 gal (US) - - 5 gal (US)
    Cooling System Refill - Tier 2 Equivalent Engine 41.7 gal (US) - - -
    Engine Crankcase 35.1 gal (US) 5.3 gal (US) - -
    Power Train 120 gal (US) - - -
    Power Train - Refill Volume 103.3 gal (US) - - -
    Final Drive - Each 12.4 gal (US) - - -
    Roller Frames - Each 24.8 gal (US) - - -
    Hydraulic Tank 42.2 gal (US) - - -
    Hydraulic System Tank and Chassis 64.7 gal (US) - - -
    Hydraulic System Chassis + Blade and Ripper (Standard) 117.6 gal (US) - - -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) 143.4 gal (US) - - -
    Fuel Tank - 132.1 gal (US) - 51.5 gal (US)
    Diesel Exhaust Fluid Tank - 4.2 gal (US) - -
    Cooling Systems - Tier 4 Final/EU Stage V - 21.4 gal (US) - -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - 19.3 gal (US) - -
    Transmission - 13.2 gal (US) - -
    Differential - Final Drives - Front - 17.2 gal (US) - -
    Differential - Final Drives - Rear - 17.2 gal (US) - -
    Hydraulic System - Implement/Steering - 34.1 gal (US) - -
    Hydraulic Tank Only - 19.8 gal (US) - -
    Final Drive - Each - LGP - - - 2.6 gal (US)
    Crankcase - With Filter - - - 2.8 gal (US)
    Transmission - Hydraulic Tank - - - 23.8 gal (US)
    Final Drives - Each Side - - - 2.6 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 4.9 gal (US)

    Standards
    ROPS Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 - Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. -
    FOPS Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II - Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. -
    Sound (1) The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). - The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c -
    Sound (2) The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. -
    Sound - - The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling -

    Dimensions - D11
    Ground Clearance* 31.4 in - - -
    Track Gauge 114 in - - -
    Width at Outside of Track (710 mm Track Shoe) 142 in - - -
    Height (ROPS/canopy)* 185.9 in - - -
    Length of Track on Ground 175 in - - -
    Length with SU-Blade** - No rear attachment 337.8 in - - -
    Overall Length SU-Blade and SS Ripper** 414.4 in - - -
    Note *Includes grouser height for total dimensions on hard surfaces. - - -

    Air Conditioning System
    Note (1) The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) - - -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Engine - Tier 4 Final/EU Stage V
    Engine Model - Cat C7.1 - -
    Net Power (SAE J1349:2011) - 249 HP - -
    Net Power (ISO 9249:2007) - 249 HP - -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V - -
    Rated Speed - 2200 r/min - -
    Gross Power (SAE J1995:2014) - 284 HP - -
    Engine Power (ISO 14396:2002) - 275 HP - -
    Peak Torque - 1,400 rpm - 902 lb/ft - -
    Torque Rise - 52% - -
    Bore - 4.1 in - -
    Stroke - 5.3 in - -
    Displacement - 427.8 in³ - -
    High Idle Speed - 2270 r/min - -
    Low Idle Speed - 800 r/min - -
    Maximum Altitude without Derating - 9842.5 ft - -
    Note - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. - -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - 48526 lb - -

    Scoops
    Chip Scoop Doze Capacity - 37.9 yd³ - -
    Chip Scoop Carry Capacity - 19 yd³ - -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - Cat C7.1 - -
    Emissions - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA - -
    Rated Speed - 2200 r/min - -
    Net Power (SAE J1349:2011) - 249 HP - -
    Gross Power (SAE J1995:2014) - 286 HP - -
    Engine Power (ISO 14396:2002) - 275 HP - -
    Peak Torque - 1,400 rpm - 749 lb/ft - -
    Torque Rise - 26% - -
    Bore - 4.1 in - -
    Stroke - 5.3 in - -
    Displacement - 427.8 in³ - -
    High Idle Speed - 2270 r/min - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - 47887 lb - -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - 52280 lb - -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - 51639 lb - -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH - -
    Lift/Tilt System - Variable displacement piston - -
    Maximum Flow at 2,200 rpm - 23.5 gal/min - -
    Relief Valve Setting - Lift/Tilt - 3190 psi - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 120 mm × 915 mm (4.7 in × 36.0 in) - -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 101.6 mm × 234 mm (4.0 in × 9.2 in) - -
    Pilot System - Open center, fixed displacement gear - -
    Pilot Relief Valve Setting - 3046 psi - -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing - -
    Steering System - Pump - Variable displacement piston - -
    Maximum Flow at 2,200 rpm - 38.8 gal/min - -
    Relief Valve Setting - Steering - 4003 psi - -
    Total Steering Angle - 72° - -
    Steering Cycle Times - High Idle - 3 s - -
    Steering Cycle Times - Low Idle - 8.2 s - -

    Axles
    Front - Planetary – Fixed - -
    Rear - Planetary – Oscillating - -
    Oscillation Angle - ±10° - -

    Braking System
    Service Brakes - Single Disc Wet (enclosed) 4 WHL - -
    Parking Brake - Drum and Shoe, Spring Applied, Hydraulic Released - -

    Dimensions (Approximate)
    Height to Top of Beacon - 13.1 ft - -
    Height - Top of Cab - 12.1 ft - -
    Height - Top of Exhaust Pipe - 11.3 ft - -
    Height - Top of Hood - 8.7 ft - -
    Height to Top of Radiator Guard - 8 ft - -
    Ground Clearance to Hitch - 1.4 ft - -
    Ground Clearance to Transmission Guard - 1.4 ft - -
    Ground Clearance to Bottom of Bumper - 2.3 ft - -
    Centerline of Rear Axle to Bumper - 6.5 ft - -
    Centerline of Front Axle to Hitch - 5.5 ft - -
    Wheel Base - 11 ft - -
    Width over Platform - 10.3 ft - -
    Overall Length to Front Tire - 21 ft - -
    Overall Machine Length with Straight Blade - 23.6 ft - -
    Overall Machine Length with Coal Blade - 25.5 ft - -
    Ground Clearance* - - 18.1 in -
    Track Gauge - - 88.6 in -
    Width - Without Trunnions - Standard Shoe - - 113 in -
    Width - Over Trunnions - - 130.3 in -
    Height - FOPS Cab* - - 150.4 in -
    Height - Top of Stack* - - 152.6 in -
    Height - ROPS/Canopy* - - 157.5 in -
    Drawbar Height (Center of Clevis)* - - 30 in -
    Length - Track on Ground - - 136.6 in -
    Overall Length - Basic Tractor - - 193.3 in -
    Length - Basic Tractor - With Drawbar - - 206.4 in -
    Length - Basic Tractor - With Winch - - 218.3 in -
    Length - With SU-Blade** - - 259.9 in -
    Length - With U-Blade - - 274.3 in -
    Length - With Single-Shank Ripper - - 257 in -
    Length - With Multi-Shank Ripper - - 257.4 in -
    Overall Length - SU-Blade/SS Ripper - - 323.6 in -
    Note (1) - - *Includes grouser height for total dimensions on hard surfaces. -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) - -
    Machine Sound Level (ISO 6395) - 111 dB(A) - -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A) - -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) - -
    Machine Sound Level (ISO 6395) - 109 dB(A) - -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) - -
    Machine Sound Level (ISO 6395) - 112 dB(A) - -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). - -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) - -
    Machine Sound Level (ISO 6395) - 110 dB(A) - -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. - -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. - -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). - -

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - - Cat® C18 -
    Engine Power - Net SAE J1349/ISO 9249 - - 452 HP -
    Bore - - 5.7 in³ -
    Stroke - - 7.2 in -
    Displacement - - 1106 in³ -
    Engine Power - Gross SAE J1995 - - 487 HP -
    Engine Power - ISO 14396 - - 479 HP -
    Emissions - - U.S. EPA Tier 2 or Tier 3 equivalent -
    Note (1) - - All engine ratings apply at 1,750 rpm. -
    Note (2) - - No derating required up to 4267 m (14,000 ft) altitude. -

    Steering and Brakes
    Steering Type - - Differential -
    Brake Type - - Spring Applied Wet Disc -
    Brake Diameter - - 15.5 in -
    Brake Count - - 8 -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) - - 254 gal (US) -
    DEF Tank (Tier 4 only) - - 9.5 gal (US) -
    Fuel Tank (Fast Fill) - - 248 gal (US) -
    Cooling System - - 21 gal (US) -
    Engine Crankcase* - - 10 gal (US) -
    Powertrain - - 40 gal (US) -
    Final Drives (each) - - 4 gal (US) -
    Roller Frames (each) - - 12 gal (US) -
    Pivot Shaft Oil - - 8 gal (US) -
    Hydraulic System Tank - - 24 gal (US) -
    Note - - *With oil filters. -
    Note 2 - - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or -
    Note 3 - - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. -
    Note 4 - - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. -

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - - 17.8 yd³ -
    Blade Width (over end bits) - - 171.3 in -
    Blade Height - - 76.1 in -
    Maximum Digging Depth - - 23.9 in -
    Ground Clearance at Full Lift - - 56 in -
    Maximum Tilt - - 37 in -
    Blade Weight - - 10587 lb -
    Total Operating Weight* (with blade and single-shank ripper) - - 110205 lb -
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Blade - Universal
    Blade Capacity (SAE J1265) - - 21.7 yd³ -
    Blade Width (over end bits) - - 184.3 in -
    Blade Height - - 76.1 in -
    Maximum Digging Depth - - 23.9 in -
    Ground Clearance at Full Lift - - 56 in -
    Maximum Tilt - - 39.9 in -
    Blade Weight - - 12016 lb -
    Total Operating Weight* (with blade and single-shank ripper) - - 111362 lb -
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Winches
    Winch Model - - PA 140VS -
    Weight* - - 3950 lb -
    Oil Capacity - - 4 gal (US) -
    Drum Width - - 12.6 in -
    Wire Cable Diameter - Recommended - - 1.13 in -
    Wire Cable Diameter - Optional - - 1.25 ft -
    Maximum Drum Capacity - Recommended Cable Length - - 257 in -
    Maximum Drum Capacity - Optional Cable Length - - 204 ft -
    Wire Cable Ferrule Size - Outside Diameter - - 2.4 in -
    Wire Cable Ferrule Size - Length - - 2.8 in -
    Note - - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). -
    Note (2) - - Variable speed, hydraulically driven, dual braking system, three-roller fairlead. -

    Engine
    Engine Model - - - Cat® C3.6
    Power - Net - - - 104 HP
    Displacement - - - 220 in³
    Net Power - 2,200 rpm - SAE J1349 - - - 104 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - - 104 HP
    Note (1) - - - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Power Train - - - Hydrostatic
    Note (2) - - - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

    Ripper
    Type - - - Parallelogram
    Number of Shanks - - - 3
    Height - - - 6.5 in
    Weight - - - 1222 lb
    Maximum Digging Depth - - - 13.3 in
    Maximum Reach - Ground Line - - - 30.2 in
    Overall Width - - - 67.3 in
    Maximum Ground Clearance Under Tip - - - 17.6 in

    Dimensions
    BLADE: Blade Width - LGP - - - 126.7 in
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    BLADE: Digging Depth - LGP - - - 23.2 in
    Track Gauge - LGP - - - 67.9 in
    BLADE: Blade Capacity (SAE) - LGP - - - 3.06 yd³
    BLADE: Blade Width at Maximum Angle - LGP - - - 115.8 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - - 52° to 58°
    Ground Clearance - LGP, 762 mm (30 in) - - - 13 in
    BLADE: Blade Height - LGP - - - 39.8 in
    BLADE: Blade Lift Height - LGP - - - 30.2 in
    Ground Clearance - LGP - - - 13 in
    Overall Length - With Blade - LGP, 762 mm (30 in) - - - 169.6 in
    Overall Length - With Blade - LGP - - - 169.6 in
    Note - - - Abrasion Undercarriage
    BLADE: Maximum Tilt - LGP - - - 17.7 in
    BLADE: Maximum Angle (either side) - LGP - - - 25°
    BLADE: Blade Capacity (SAE) - Standard - - - 2.86 yd³
    Track Gauge - Standard - - - 63 in
    BLADE: Digging Depth - Standard - - - 23.8 in
    BLADE: Blade Lift Height - Standard - - - 30.2 in
    Ground Clearance - Standard - - - 13 in
    Overall Length - With Blade - Standard - - - 170.7 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - - 52° to 58°
    BLADE: Blade Height - Standard - - - 42.2 in
    BLADE: Maximum Tilt - Standard - - - 15.8 in
    BLADE: Blade Width - Standard - - - 109.5 in
    BLADE: Blade Width at Maximum Angle - Standard - - - 103.8 in
    BLADE: Maximum Angle (either side) - Standard - - - 25°
    Length of Basic Dozer (without blade) - Standard - - - 128.7 in
    Dozer Height - Standard - - - 109 in
    Width of Dozer (standard shoes, no blade) - LGP - - - 92.9 in
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - - - 103.5 in
    Length of Basic Dozer (without blade) - LGP - - - 128.7 in
    Dozer Height - LGP, 762 mm (30 in) - - - 109 in
    Width of Dozer (standard shoes, no blade) - Standard - - - 83 in
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - - - 128.7 in
    Dozer Height - LGP - - - 109 in

    Cab
    ROPS - - - ISO 3471:2008
    FOPS - - - ISO 3449:2005 Level II

    Retrieval Winch
    Maximum Line Pull - Bare Drum - - - 32150 lb
    Control - - - Hydraulic
    Rope Diameter - Optional - - - 0.75 in
    Drum Capacity - Optional Cable - - - 195 ft
    Maximum Line Speed - Full Drum - - - 79 ft/min
    Drum Capacity - Recommended Cable - - - 277 ft
    Winch Drive - - - Hydraulic
    Weight - - - 1747 lb
    Maximum Line Pull - Full Drum - - - 20350 lb
    Rope Diameter - Recommended - - - 0.63 in
    Maximum Line Speed - Bare Drum - - - 50 ft/min
    Speed - - - Variable
    Winch Length - - - 35.63 in
    Drum Diameter - - - 8 in
    Overall width - - - 27.91 in
    Drum Width - - - 9.65 in
    Throat Clearance - - - 5.6 in

    High Performance Winch
    Winch length - - - 27.76 in
    Rope diameter – optional - - - 0.75 in
    Maximum line speed – bare drum - - - 131 ft/min
    Maximum line pull – bare drum - - - 40000 lb
    Weight - - - 1345 lb
    Drum capacity – optional - - - 256 ft
    Maximum line speed – full drum - - - 207 ft/min
    Rope diameter – recommended - - - 0.63 in
    Winch drive - - - Hydrostatic
    Throat clearance - - - 6.75 in
    Drum diameter - - - 10 in
    Overall width - - - 29.2 in
    Drum width - - - 10.8 in
    Maximum line pull – full drum - - - 25000 lb
    Speed - - - Variable
    Drum capacity – recommended cable - - - 371 ft
    Control - - - Hydraulic
    Add a Similar Product: