CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D11 Dozer
    View Product
    814 Wheel Dozer
    View Product Remove
    D9 Dozer
    View Product Remove

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat® C32 - Cat® C18
    Engine Power - Net SAE J1349/ISO 9249 - Forward 850 HP - -
    Displacement 1959 in³ - 1106 in³
    Engine Power - Net SAE J1349/ISO 9249 - Reverse 955 HP - -
    Note (1) *Excludes all fan losses. - All Engine ratings apply at 1,750 rpm.
    Note (2) Engine ratings apply at 1,800 rpm. - No derating required up to 2499 m (8,200 ft).
    Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -
    Bore - - 5.7 in³
    Stroke - - 7.2 in³
    Engine Power - Gross SAE J1995 - - 477 HP
    Engine Power - ISO 14396 - - 468 HP
    Engine Power - Net SAE J1349/ISO 9249 - - 440 HP
    Emissions - - U.S. EPA Tier 4 / EU Stage V

    Weights
    Operating Weight 229800 lb - 110225 lb
    Operating Weight - Carrydozer 250665 lb - -
    Note (1) D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. - D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
    Note (2) D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. - D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
    Shipping Weight - - 84373 lb

    Blades
    Semi-Universal (SU)* Capacity 35.6 yd³ - -
    Semi-Universal (SU)* Width Over Endbits 219.8 in - -
    U-Blade Capacity 45 yd³ - -
    U-Blade Width 249.6 in - -
    Reclamation Universal - Blade capacity (SAE J1265) 55 yd³ - -
    Reclamation Universal - Width with blade (over end bits) 251.8 in - -
    Carry Dozer - Blade capacity (SAE J1265) 57 yd³ - -
    Carry Dozer - Width with blade (over end bits) 263.9 in - -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model Cat® C32 - -
    Displacement 1959 in³ - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward 850 HP - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse 957 HP - -
    Note (1) *Excludes all fan losses. - -
    Note (2) Engine ratings apply at 1,800 rpm. - -
    Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -

    Fuel Tank Capacities
    Fuel Tank - Total Volume 500 gal (US) - -
    Fuel Tank - Usable Volume 475 gal (US) - -

    Hydraulic Controls
    Pump Type Variable displacement piston pump - Piston-type geared to flywheel
    Combined Pump Output - Implement 177 gal/min - -
    Pump Output - Steering - - 96 gal/min
    Fan Pump - - 21 gal/min
    Tilt Cylinder Flow - Rod End Flow - - 53 gal/min
    Tilt Cylinder Flow - Head End Flow - - 53 gal/min
    Lift Cylinder Relief Valve Setting - - 3800 lbf/in
    Tilt Cylinder Relief Valve Setting - - 2799 psi
    Ripper - Lift - Relief Valve Setting - - 3800 psi
    Ripper - Pitch - Relief Valve Setting - - 3800 psi
    Steering System - Pressure - - 5874 psi
    Tank Capacity - - 24 gal/min
    Note (1) - - Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
    Note (2) - - Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
    Note (3) - - Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)

    Undercarriage
    Shoe Type Extreme Service - Extreme Service
    Width - Shoe 28 in - 24 in
    Width - Shoe - CD 36 in - -
    Shoes/Side 41 - 43
    Grouser Height 4 in - 3.3 in
    Pitch 12.5 in - 9.4 in
    Ground Clearance* 30.6 in - -
    Track Gauge 114 in - 88.6 in
    Length - Track on Ground 175 in - 136.6 in
    Ground Contact Area 9781 in² - 45.6 ft²
    Ground Contact Area - CD 12605 in² - -
    Track Rollers/Side 8 - 8
    Number of Carrier Rollers 1 per side (optional) - 1 per side (optional)
    Ground Clearance - - 18.1 in

    Transmission
    1.0 Forward 2.5 mile/h - 2.2 mile/h
    2.0 Forward 4.4 mile/h - 3.9 mile/h
    3.0 Forward 7.6 mile/h - 6.8 mile/h
    1.0 Reverse 3 mile/h - 2.7 mile/h
    2.0 Reverse 5.3 mile/h - 4.8 mile/h
    3.0 Reverse 9.1 mile/h - 8.4 mile/h
    Drawbar Pull - 3 Forward 46250 ft·lbf - -
    Drawbar Pull - 1 Forward 148200 ft·lbf - -
    Drawbar Pull - 2 Forward 82300 ft·lbf - -
    Transmission Type - Cat Planetary Power Shift -
    Forward - 1 - 3.7 mile/h -
    Forward - 2 - 6.5 mile/h -
    Forward - 3 - 11.2 mile/h -
    Forward - 4 - 19.4 mile/h -
    Reverse - 1 - 4.2 mile/h -
    Reverse - 2 - 7.3 mile/h -
    Reverse - 3 - 12.8 mile/h -
    Reverse - 4 - 22.1 mile/h -
    Type - - Planetary powershift

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) 66000 lb - 35520 lbf
    Maximum penetration depth (standard tip) 63.5 in - 48.5 in
    Pryout Force 148510 lb - 74637 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.7 in
    Number of Pockets - - 1
    Weight - - 10701 lb
    Total Operating Weight* (with SU Blade and noted ripper) - - 110205 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) 66110 lb - 38667 lbf
    Maximum penetration depth (standard tip) 85.5 in - 68 in
    Pryout Force 148510 lb - 74412 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 32.2 in
    Number of Pockets - - 1
    Weight - - 10981 lb
    Total Operating Weight* (with SU Blade and noted ripper) - - 110485 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width 131.1 in - -
    Maximum Penetration Force - Shank Vertical 77350 lb - 34621 lbf
    Maximum Penetration - Standard Tip 43.3 in - 31.4 in
    Pry-Out Force - Multi-Shank Ripper with One Tooth 145640 lb - 81156 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.6 in
    Number of Pockets - - 3
    Weight - - 12136 lb
    Total Operating Weight* - With SU-Blade and Ripper - - 111739 lb
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) 149.8 in - -
    Length with SU-Blade** - No rear attachment 345.1 in - -
    Overall Length SU-Blade and SS Ripper** 421.7 in - -

    Service Refill Capacities
    Cooling System 46.8 gal (US) - -
    Cooling System Refill - Tier 2 Equivalent Engine 41.7 gal (US) - -
    Engine Crankcase 35.1 gal (US) 5.3 gal (US) -
    Power Train 120 gal (US) - -
    Power Train - Refill Volume 103.3 gal (US) - -
    Final Drive - Each 12.4 gal (US) - -
    Roller Frames - Each 24.8 gal (US) - -
    Hydraulic Tank 42.2 gal (US) - -
    Hydraulic System Tank and Chassis 64.7 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Standard) 117.6 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) 143.4 gal (US) - -
    Fuel Tank - 132.1 gal (US) -
    Diesel Exhaust Fluid Tank - 4.2 gal (US) -
    Cooling Systems - Tier 4 Final/EU Stage V - 21.4 gal (US) -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - 19.3 gal (US) -
    Transmission - 13.2 gal (US) -
    Differential - Final Drives - Front - 17.2 gal (US) -
    Differential - Final Drives - Rear - 17.2 gal (US) -
    Hydraulic System - Implement/Steering - 34.1 gal (US) -
    Hydraulic Tank Only - 19.8 gal (US) -

    Standards
    ROPS Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 - Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
    FOPS Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II - Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
    Sound (1) The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). - The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
    Sound (2) The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
    Sound - - The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling

    Dimensions - D11
    Ground Clearance* 31.4 in - -
    Track Gauge 114 in - -
    Width at Outside of Track (710 mm Track Shoe) 142 in - -
    Height (ROPS/canopy)* 185.9 in - -
    Length of Track on Ground 175 in - -
    Length with SU-Blade** - No rear attachment 337.8 in - -
    Overall Length SU-Blade and SS Ripper** 414.4 in - -
    Note *Includes grouser height for total dimensions on hard surfaces. - -

    Air Conditioning System
    Note (1) The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) - -
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.

    Engine - Tier 4 Final/EU Stage V
    Engine Model - Cat C7.1 -
    Net Power (SAE J1349:2011) - 249 HP -
    Net Power (ISO 9249:2007) - 249 HP -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V -
    Rated Speed - 2200 r/min -
    Gross Power (SAE J1995:2014) - 284 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 902 lb/ft -
    Torque Rise - 52% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -
    Low Idle Speed - 800 r/min -
    Maximum Altitude without Derating - 9842.5 ft -
    Note - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - 48526 lb -

    Scoops
    Chip Scoop Doze Capacity - 37.9 yd³ -
    Chip Scoop Carry Capacity - 19 yd³ -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - Cat C7.1 -
    Emissions - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA -
    Rated Speed - 2200 r/min -
    Net Power (SAE J1349:2011) - 249 HP -
    Gross Power (SAE J1995:2014) - 286 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 749 lb/ft -
    Torque Rise - 26% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - 47887 lb -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - 52280 lb -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - 51639 lb -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH -
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 2,200 rpm - 23.5 gal/min -
    Relief Valve Setting - Lift/Tilt - 3190 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 120 mm × 915 mm (4.7 in × 36.0 in) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 101.6 mm × 234 mm (4.0 in × 9.2 in) -
    Pilot System - Open center, fixed displacement gear -
    Pilot Relief Valve Setting - 3046 psi -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing -
    Steering System - Pump - Variable displacement piston -
    Maximum Flow at 2,200 rpm - 38.8 gal/min -
    Relief Valve Setting - Steering - 4003 psi -
    Total Steering Angle - 72° -
    Steering Cycle Times - High Idle - 3 s -
    Steering Cycle Times - Low Idle - 8.2 s -

    Axles
    Front - Planetary – Fixed -
    Rear - Planetary – Oscillating -
    Oscillation Angle - ±10° -

    Braking System
    Service Brakes - Single Disc Wet (enclosed) 4 WHL -
    Parking Brake - Drum and Shoe, Spring Applied, Hydraulic Released -

    Dimensions (Approximate)
    Height to Top of Beacon - 13.1 ft -
    Height - Top of Cab - 12.1 ft -
    Height - Top of Exhaust Pipe - 11.3 ft -
    Height - Top of Hood - 8.7 ft -
    Height to Top of Radiator Guard - 8 ft -
    Ground Clearance to Hitch - 1.4 ft -
    Ground Clearance to Transmission Guard - 1.4 ft -
    Ground Clearance to Bottom of Bumper - 2.3 ft -
    Centerline of Rear Axle to Bumper - 6.5 ft -
    Centerline of Front Axle to Hitch - 5.5 ft -
    Wheel Base - 11 ft -
    Width over Platform - 10.3 ft -
    Overall Length to Front Tire - 21 ft -
    Overall Machine Length with Straight Blade - 23.6 ft -
    Overall Machine Length with Coal Blade - 25.5 ft -
    Ground Clearance* - - 18.1 in
    Track Gauge - - 88.6 in
    Width - Without Trunnions - Standard Shoe - - 113 in
    Width - Over Trunnions - - 130.3 in
    Height - FOPS Cab* - - 150.4 in
    Height - Top of Stack* - - 152.6 in
    Height - ROPS/Canopy* - - 157.5 in
    Drawbar Height (Center of Clevis)* - - 30 in
    Length - Track on Ground - - 136.6 in
    Overall Length - Basic Tractor - - 193.3 in
    Length - Basic Tractor - With Drawbar - - 206.4 in
    Length - Basic Tractor - With Winch - - 218.3 in
    Length - With SU-Blade** - - 259.9 in
    Length - With U-Blade - - 274.3 in
    Length - With Single-Shank Ripper - - 257 in
    Length - With Multi-Shank Ripper - - 257.4 in
    Overall Length - SU-Blade/SS Ripper - - 323.6 in
    Note (1) - - *Includes grouser height for total dimensions on hard surfaces.

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 111 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 109 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - - Cat® C18
    Engine Power - Net SAE J1349/ISO 9249 - - 452 HP
    Bore - - 5.7 in³
    Stroke - - 7.2 in
    Displacement - - 1106 in³
    Engine Power - Gross SAE J1995 - - 487 HP
    Engine Power - ISO 14396 - - 479 HP
    Emissions - - U.S. EPA Tier 2 or Tier 3 equivalent
    Note (1) - - All engine ratings apply at 1,750 rpm.
    Note (2) - - No derating required up to 4267 m (14,000 ft) altitude.

    Steering and Brakes
    Steering Type - - Differential
    Brake Type - - Spring Applied Wet Disc
    Brake Diameter - - 15.5 in
    Brake Count - - 8

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) - - 254 gal (US)
    DEF Tank (Tier 4 only) - - 9.5 gal (US)
    Fuel Tank (Fast Fill) - - 248 gal (US)
    Cooling System - - 21 gal (US)
    Engine Crankcase* - - 10 gal (US)
    Powertrain - - 40 gal (US)
    Final Drives (each) - - 4 gal (US)
    Roller Frames (each) - - 12 gal (US)
    Pivot Shaft Oil - - 8 gal (US)
    Hydraulic System Tank - - 24 gal (US)
    Note - - *With oil filters.
    Note 2 - - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
    Note 3 - - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
    Note 4 - - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - - 17.8 yd³
    Blade Width (over end bits) - - 171.3 in
    Blade Height - - 76.1 in
    Maximum Digging Depth - - 23.9 in
    Ground Clearance at Full Lift - - 56 in
    Maximum Tilt - - 37 in
    Blade Weight - - 10587 lb
    Total Operating Weight* (with blade and single-shank ripper) - - 110205 lb
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Blade - Universal
    Blade Capacity (SAE J1265) - - 21.7 yd³
    Blade Width (over end bits) - - 184.3 in
    Blade Height - - 76.1 in
    Maximum Digging Depth - - 23.9 in
    Ground Clearance at Full Lift - - 56 in
    Maximum Tilt - - 39.9 in
    Blade Weight - - 12016 lb
    Total Operating Weight* (with blade and single-shank ripper) - - 111362 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Winches
    Winch Model - - PA 140VS
    Weight* - - 3950 lb
    Oil Capacity - - 4 gal (US)
    Drum Width - - 12.6 in
    Wire Cable Diameter - Recommended - - 1.13 in
    Wire Cable Diameter - Optional - - 1.25 ft
    Maximum Drum Capacity - Recommended Cable Length - - 257 in
    Maximum Drum Capacity - Optional Cable Length - - 204 ft
    Wire Cable Ferrule Size - Outside Diameter - - 2.4 in
    Wire Cable Ferrule Size - Length - - 2.8 in
    Note - - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
    Note (2) - - Variable speed, hydraulically driven, dual braking system, three-roller fairlead.
    Add a Similar Product: