Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-
-
Weights
Operating Weight
229800 lb
-
-
Operating Weight - Carrydozer
250665 lb
-
-
Note (1)
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
-
-
Note (2)
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
Reclamation Universal - Width with blade (over end bits)
251.8 in
-
-
Carry Dozer - Blade capacity (SAE J1265)
57 yd³
-
-
Carry Dozer - Width with blade (over end bits)
263.9 in
-
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
Cat® C32
-
-
Displacement
1959 in³
-
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
850 HP
-
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
957 HP
-
-
Note (1)
*Excludes all fan losses.
-
-
Note (2)
Engine ratings apply at 1,800 rpm.
-
-
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-
-
Fuel Tank Capacities
Fuel Tank - Total Volume
500 gal (US)
-
-
Fuel Tank - Usable Volume
475 gal (US)
-
-
Hydraulic Controls
Pump Type
Variable displacement piston pump
-
-
Combined Pump Output - Implement
177 gal/min
-
-
Undercarriage
Shoe Type
Extreme Service
-
-
Width - Shoe
28 in
-
-
Width - Shoe - CD
36 in
-
-
Shoes/Side
41
-
-
Grouser Height
4 in
-
-
Pitch
12.5 in
-
-
Ground Clearance*
30.6 in
-
-
Track Gauge
114 in
-
-
Length - Track on Ground
175 in
-
-
Ground Contact Area
9781 in²
-
-
Ground Contact Area - CD
12605 in²
-
-
Track Rollers/Side
8
-
-
Number of Carrier Rollers
1 per side (optional)
-
-
Transmission
1.0 Forward
2.5 mile/h
-
-
2.0 Forward
4.4 mile/h
-
-
3.0 Forward
7.6 mile/h
-
-
1.0 Reverse
3 mile/h
-
-
2.0 Reverse
5.3 mile/h
-
-
3.0 Reverse
9.1 mile/h
-
-
Drawbar Pull - 3 Forward
46250 ft·lbf
-
-
Drawbar Pull - 1 Forward
148200 ft·lbf
-
-
Drawbar Pull - 2 Forward
82300 ft·lbf
-
-
Transmission Type
-
Cat Planetary Power Shift
-
Forward - 1
-
3.7 mile/h
-
Forward - 2
-
6.5 mile/h
-
Forward - 3
-
11.2 mile/h
-
Forward - 4
-
19.4 mile/h
-
Reverse - 1
-
4.2 mile/h
-
Reverse - 2
-
7.3 mile/h
-
Reverse - 3
-
12.8 mile/h
-
Reverse - 4
-
22.1 mile/h
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
66000 lb
-
-
Maximum penetration depth (standard tip)
63.5 in
-
-
Pryout Force
148510 lb
-
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
66110 lb
-
-
Maximum penetration depth (standard tip)
85.5 in
-
-
Pryout Force
148510 lb
-
-
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width
131.1 in
-
-
Maximum Penetration Force - Shank Vertical
77350 lb
-
-
Maximum Penetration - Standard Tip
43.3 in
-
-
Pry-Out Force - Multi-Shank Ripper with One Tooth
145640 lb
-
-
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)
149.8 in
-
-
Length with SU-Blade** - No rear attachment
345.1 in
-
-
Overall Length SU-Blade and SS Ripper**
421.7 in
-
-
Service Refill Capacities
Cooling System
46.8 gal (US)
-
-
Cooling System Refill - Tier 2 Equivalent Engine
41.7 gal (US)
-
-
Engine Crankcase
35.1 gal (US)
5.3 gal (US)
-
Power Train
120 gal (US)
-
-
Power Train - Refill Volume
103.3 gal (US)
-
-
Final Drive - Each
12.4 gal (US)
-
-
Roller Frames - Each
24.8 gal (US)
-
-
Hydraulic Tank
42.2 gal (US)
-
-
Hydraulic System Tank and Chassis
64.7 gal (US)
-
-
Hydraulic System Chassis + Blade and Ripper (Standard)
117.6 gal (US)
-
-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)
143.4 gal (US)
-
-
Fuel Tank
-
132.1 gal (US)
-
Diesel Exhaust Fluid Tank
-
4.2 gal (US)
-
Cooling Systems - Tier 4 Final/EU Stage V
-
21.4 gal (US)
-
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA
-
19.3 gal (US)
-
Transmission
-
13.2 gal (US)
-
Differential - Final Drives - Front
-
17.2 gal (US)
-
Differential - Final Drives - Rear
-
17.2 gal (US)
-
Hydraulic System - Implement/Steering
-
34.1 gal (US)
-
Hydraulic Tank Only
-
19.8 gal (US)
-
Standards
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
-
-
FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
-
-
Sound (1)
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
-
-
Sound (2)
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).
-
-
Dimensions - D11
Ground Clearance*
31.4 in
-
-
Track Gauge
114 in
-
-
Width at Outside of Track (710 mm Track Shoe)
142 in
-
-
Height (ROPS/canopy)*
185.9 in
-
-
Length of Track on Ground
175 in
-
-
Length with SU-Blade** - No rear attachment
337.8 in
-
-
Overall Length SU-Blade and SS Ripper**
414.4 in
-
-
Note
*Includes grouser height for total dimensions on hard surfaces.
-
-
Air Conditioning System
Note (1)
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)
-
-
Engine - Tier 4 Final/EU Stage V
Engine Model
-
Cat C7.1
-
Net Power (SAE J1349:2011)
-
249 HP
-
Net Power (ISO 9249:2007)
-
249 HP
-
Emissions
-
U.S. EPA Tier 4 Final/EU Stage V
-
Rated Speed
-
2200 r/min
-
Gross Power (SAE J1995:2014)
-
284 HP
-
Engine Power (ISO 14396:2002)
-
275 HP
-
Peak Torque - 1,400 rpm
-
902 lb/ft
-
Torque Rise
-
52%
-
Bore
-
4.1 in
-
Stroke
-
5.3 in
-
Displacement
-
427.8 in³
-
High Idle Speed
-
2270 r/min
-
Low Idle Speed
-
800 r/min
-
Maximum Altitude without Derating
-
9842.5 ft
-
Note
-
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
-
Operating Specifications - Tier 4 Final/EU Stage V
Operating Weight
-
48526 lb
-
Scoops
Chip Scoop Doze Capacity
-
37.9 yd³
-
Chip Scoop Carry Capacity
-
19 yd³
-
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Engine Model
-
Cat C7.1
-
Emissions
-
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
-
Rated Speed
-
2200 r/min
-
Net Power (SAE J1349:2011)
-
249 HP
-
Gross Power (SAE J1995:2014)
-
286 HP
-
Engine Power (ISO 14396:2002)
-
275 HP
-
Peak Torque - 1,400 rpm
-
749 lb/ft
-
Torque Rise
-
26%
-
Bore
-
4.1 in
-
Stroke
-
5.3 in
-
Displacement
-
427.8 in³
-
High Idle Speed
-
2270 r/min
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Operating Weight
-
47887 lb
-
Operating Specifications - Tier 4 Final/EU Stage V - Scoop
Operating Weight
-
52280 lb
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
Operating Weight
-
51639 lb
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
Pilot operated LS valve with EH
-
Lift/Tilt System
-
Variable displacement piston
-
Maximum Flow at 2,200 rpm
-
23.5 gal/min
-
Relief Valve Setting - Lift/Tilt
-
3190 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
-
120 mm × 915 mm (4.7 in × 36.0 in)
-
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
-
101.6 mm × 234 mm (4.0 in × 9.2 in)
-
Pilot System
-
Open center, fixed displacement gear
-
Pilot Relief Valve Setting
-
3046 psi
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, load sensing
-
Steering System - Pump
-
Variable displacement piston
-
Maximum Flow at 2,200 rpm
-
38.8 gal/min
-
Relief Valve Setting - Steering
-
4003 psi
-
Total Steering Angle
-
72°
-
Steering Cycle Times - High Idle
-
3 s
-
Steering Cycle Times - Low Idle
-
8.2 s
-
Axles
Front
-
Planetary – Fixed
-
Rear
-
Planetary – Oscillating
-
Oscillation Angle
-
±10°
-
Braking System
Service Brakes
-
Single Disc Wet (enclosed) 4 WHL
-
Parking Brake
-
Drum and Shoe, Spring Applied, Hydraulic Released
-
Dimensions (Approximate)
Height to Top of Beacon
-
13.1 ft
-
Height - Top of Cab
-
12.1 ft
-
Height - Top of Exhaust Pipe
-
11.3 ft
-
Height - Top of Hood
-
8.7 ft
-
Height to Top of Radiator Guard
-
8 ft
-
Ground Clearance to Hitch
-
1.4 ft
-
Ground Clearance to Transmission Guard
-
1.4 ft
-
Ground Clearance to Bottom of Bumper
-
2.3 ft
-
Centerline of Rear Axle to Bumper
-
6.5 ft
-
Centerline of Front Axle to Hitch
-
5.5 ft
-
Wheel Base
-
11 ft
-
Width over Platform
-
10.3 ft
-
Overall Length to Front Tire
-
21 ft
-
Overall Machine Length with Straight Blade
-
23.6 ft
-
Overall Machine Length with Coal Blade
-
25.5 ft
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
-
70 dB(A)
-
Machine Sound Level (ISO 6395)
-
111 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (4)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
-
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)
-
70 dB(A)
-
Machine Sound Level (ISO 6395)
-
109 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (4)
-
The operator sound pressure level uncertainty is ± 2 dB(A).
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
Operator Sound Level (ISO 6396)
-
70 dB(A)
-
Machine Sound Level (ISO 6395)
-
112 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (4)
-
The operator sound pressure level uncertainty is ± 2 dB(A).
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Operator Sound Level (ISO 6396)
-
70 dB(A)
-
Machine Sound Level (ISO 6395)
-
110 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (4)
-
The operator sound pressure level uncertainty is ± 2 dB(A).