Compare

Compare Equipment Go Back

Engine - U.S. EPA Tier 2/3 Equivalent
	D9 Dozer View Product	D11 Dozer View Product Remove	D10 Dozer View Product Remove
Engine Model	Cat® C18	-	-
Engine Power - Net SAE J1349/ISO 9249	452 HP	-	-
Bore	5.7 in³	-	-
Stroke	7.2 in	-	-
Displacement	1106 in³	-	-
Engine Power - Gross SAE J1995	487 HP	-	-
Engine Power - ISO 14396	479 HP	-	-
Emissions	U.S. EPA Tier 2 or Tier 3 equivalent	-	-
Note (1)	All engine ratings apply at 1,750 rpm.	-	-
Note (2)	No derating required up to 4267 m (14,000 ft) altitude.	-	-
Weights
Operating Weight	110225 lb	229800 lb	154888 lb
Shipping Weight	84373 lb	-	111739 lb
Note (1)	D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.	D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.	D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
Note (2)	D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.	D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.	D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
Operating Weight - Carrydozer	-	250665 lb	-
Undercarriage
Shoe Type	Extreme Service	Extreme Service	Extreme Service (ES)
Width - Shoe	24 in	28 in	24 in
Shoes/Side	43	41	44
Grouser Height	3.3 in	4 in	3.7 in
Pitch	9.4 in	12.5 in	10.2 in
Ground Clearance	18.1 in	-	28.5 in
Track Gauge	88.6 in	114 in	100.4 in
Length - Track on Ground	136.6 in	175 in	152.8 in
Ground Contact Area	45.6 ft²	9781 in²	7347 in²
Track Rollers/Side	8	8	8
Number of Carrier Rollers	1 per side (optional)	1 per side (optional)	1 per side (optional)
Width - Shoe - CD	-	36 in	-
Ground Clearance*	-	30.6 in	-
Ground Contact Area - CD	-	12605 in²	-
Standards
ROPS	Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
FOPS	Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.	Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II	Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
Sound	The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling	-	Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
Sound (1)	The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c	The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).	Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
Sound (2)	Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.	The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).	-
Note	-	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
Note (1)	-	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (2)	-	-	The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
Note (3)	-	-	The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
Steering and Brakes
Steering Type	Differential	-	Hydraulically Applied Multiple-Disc Steering Clutch
Brake Type	Spring Applied Wet Disc	-	Spring Applied Multiple- Disc Brake
Brake Diameter	15.5 in	-	15.4 in
Brake Count	8	-	10
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model	Cat® C18	Cat® C32	Cat® C27
Bore	5.7 in³	-	5.4 in
Stroke	7.2 in³	-	6 in
Displacement	1106 in³	1959 in³	1648 in³
Engine Power - Gross SAE J1995	477 HP	-	-
Engine Power - ISO 14396	468 HP	-	-
Engine Power - Net SAE J1349/ISO 9249	440 HP	-	-
Emissions	U.S. EPA Tier 4 / EU Stage V	-	U.S. EPA Tier 4 Final/EU Stage V
Note (1)	All Engine ratings apply at 1,750 rpm.	*Excludes all fan losses.	*Excludes all fan losses.
Note (2)	No derating required up to 2499 m (8,200 ft).	Engine ratings apply at 1,800 rpm.	All Engine ratings apply at 1,800 rpm.
Engine Power - Net SAE J1349/ISO 9249 - Forward	-	850 HP	-
Engine Power - Net SAE J1349/ISO 9249 - Reverse	-	955 HP	-
Note (3)	-	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	-	602 HP
Engine Power - Gross SAE J1995* - Forward	-	-	631 HP
Engine Power - Gross SAE J1995* - Reverse	-	-	766 HP
Engine Power - ISO 14396* - Forward	-	-	620 HP
Engine Power - ISO 14396* - Reverse	-	-	754 HP
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	-	722 HP
Note (4)	-	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
Note (5)	-	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
FLUID CAPACITIES
Fuel Tank (Splash Fill)	254 gal (US)	-	-
DEF Tank (Tier 4 only)	9.5 gal (US)	-	-
Fuel Tank (Fast Fill)	248 gal (US)	-	-
Cooling System	21 gal (US)	-	-
Engine Crankcase*	10 gal (US)	-	-
Powertrain	40 gal (US)	-	-
Final Drives (each)	4 gal (US)	-	12.2 gal (US)
Roller Frames (each)	12 gal (US)	-	-
Pivot Shaft Oil	8 gal (US)	-	9.5 gal (US)
Hydraulic System Tank	24 gal (US)	-	32.2 gal (US)
Note	*With oil filters.	-	-
Note 2	Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or	-	-
Note 3	All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.	-	-
Note 4	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.	-	-
Cooling System Refill – Tier 4 Final Engine	-	-	46.2 gal (US)
Engine Crankcase Sump	-	-	27.2 gal (US)
Power Train - Total Volume	-	-	81.4 gal (US)
Power Train - Refill Volume	-	-	74.8 gal (US)
Track Roller Frames (each)	-	-	16.9 gal (US)
Hydraulic Controls
Pump Type	Piston-type geared to flywheel	Variable displacement piston pump	Variable displacement piston
Pump Output - Steering	96 gal/min	-	-
Fan Pump	21 gal/min	-	21.7 gal/min
Tilt Cylinder Flow - Rod End Flow	53 gal/min	-	112 gal/min
Tilt Cylinder Flow - Head End Flow	53 gal/min	-	63.4 gal/min
Lift Cylinder Relief Valve Setting	3800 lbf/in	-	4061.1 psi
Tilt Cylinder Relief Valve Setting	2799 psi	-	3872.5 psi
Ripper - Lift - Relief Valve Setting	3800 psi	-	4061.1 psi
Ripper - Pitch - Relief Valve Setting	3800 psi	-	4061.1 psi
Steering System - Pressure	5874 psi	-	-
Tank Capacity	24 gal/min	-	32.2 gal (US)
Note (1)	Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).	-	Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).
Note (2)	Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).	-	Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
Note (3)	Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)	-	Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Combined Pump Output - Implement	-	177 gal/min	-
Pump Output - Implement	-	-	112 gal/min
Cylinder Sizing - Blade Lift - Bore	-	-	5.5 in
Cylinder Sizing - Blade Tilt - Bore	-	-	8.3 in
Cylinder Sizing - Ripper Shank Lift - Bore	-	-	8.3 in
Cylinder Sizing - Ripper Shank Angle - Bore	-	-	7.1 in
Cylinder Sizing - Blade Lift - Stroke	-	-	65.1 in
Cylinder Sizing - Blade Tilt - Stroke	-	-	9.5 in
Cylinder Sizing - Ripper Shank Lift - Stroke	-	-	21.1 in
Cylinder Sizing - Ripper Shank Angle - Stroke	-	-	26 in
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
Note (1)	-	The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)	-
Transmission
1.0 Forward	2.2 mile/h	2.5 mile/h	2.5 mile/h
2.0 Forward	3.9 mile/h	4.4 mile/h	4.5 mile/h
3.0 Forward	6.8 mile/h	7.6 mile/h	7.8 mile/h
1.0 Reverse	2.7 mile/h	3 mile/h	3.2 mile/h
2.0 Reverse	4.8 mile/h	5.3 mile/h	5.6 mile/h
3.0 Reverse	8.4 mile/h	9.1 mile/h	9.8 mile/h
Type	Planetary powershift	-	Planetary powershift
Drawbar Pull - 3 Forward	-	46250 ft·lbf	-
Drawbar Pull - 1 Forward	-	148200 ft·lbf	-
Drawbar Pull - 2 Forward	-	82300 ft·lbf	-
1.5 Forward	-	-	3.4 mile/h
2.5 Forward	-	-	6 mile/h
1.5 Reverse	-	-	4.2 mile/h
2.5 Reverse	-	-	7.5 mile/h
Transmission Clutch Diameter	-	-	17 in
Blade - Semi-Universal
Blade Capacity (SAE J1265)	17.8 yd³	-	-
Blade Width (over end bits)	171.3 in	-	-
Blade Height	76.1 in	-	-
Maximum Digging Depth	23.9 in	-	-
Ground Clearance at Full Lift	56 in	-	-
Maximum Tilt	37 in	-	-
Blade Weight	10587 lb	-	-
Total Operating Weight* (with blade and single-shank ripper)	110205 lb	-	-
Note	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	-
Blade - Universal
Blade Capacity (SAE J1265)	21.7 yd³	-	-
Blade Width (over end bits)	184.3 in	-	-
Blade Height	76.1 in	-	-
Maximum Digging Depth	23.9 in	-	-
Ground Clearance at Full Lift	56 in	-	-
Maximum Tilt	39.9 in	-	-
Blade Weight	12016 lb	-	-
Total Operating Weight* (with blade and single-shank ripper)	111362 lb	-	-
Note	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	-
Ripper - Single Shank
Maximum penetration force * (shank vertical)	35520 lbf	66000 lb	49233 lbf
Maximum penetration depth (standard tip)	48.5 in	63.5 in	59.2 in
Pryout Force	74637 lbf	148510 lb	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	34.7 in	-	36 in
Number of Pockets	1	-	-
Weight	10701 lb	-	14209 lb
Total Operating Weight* (with SU Blade and noted ripper)	110205 lb	-	-
Note	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	38667 lbf	66110 lb	53055 lbf
Maximum penetration depth (standard tip)	68 in	85.5 in	78.3 in
Pryout Force	74412 lbf	148510 lb	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	32.2 in	-	-
Number of Pockets	1	-	-
Weight	10981 lb	-	14548 lb
Total Operating Weight* (with SU Blade and noted ripper)	110485 lb	-	-
Note	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical	34621 lbf	77350 lb	-
Maximum Penetration - Standard Tip	31.4 in	43.3 in	-
Pry-Out Force - Multi-Shank Ripper with One Tooth	81156 lbf	145640 lb	-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	34.6 in	-	-
Number of Pockets	3	-	-
Weight	12136 lb	-	-
Total Operating Weight* - With SU-Blade and Ripper	111739 lb	-	-
Note	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.	-	-
Overall Beam Width	-	131.1 in	-
Dimensions (Approximate)
Ground Clearance*	18.1 in	-	28.5 in
Track Gauge	88.6 in	-	100.4 in
Width - Without Trunnions - Standard Shoe	113 in	-	-
Width - Over Trunnions	130.3 in	-	148 in
Height - FOPS Cab*	150.4 in	-	162.8 in
Height - Top of Stack*	152.6 in	-	171.5 in
Height - ROPS/Canopy*	157.5 in	-	173.5 in
Drawbar Height (Center of Clevis)*	30 in	-	-
Length - Track on Ground	136.6 in	-	152.8 in
Overall Length - Basic Tractor	193.3 in	-	209.6 in
Length - Basic Tractor - With Drawbar	206.4 in	-	-
Length - Basic Tractor - With Winch	218.3 in	-	-
Length - With SU-Blade**	259.9 in	-	-
Length - With U-Blade	274.3 in	-	305.1 in
Length - With Single-Shank Ripper	257 in	-	278.8 in
Length - With Multi-Shank Ripper	257.4 in	-	285.1 in
Overall Length - SU-Blade/SS Ripper	323.6 in	-	360.6 in
Note (1)	*Includes grouser height for total dimensions on hard surfaces.	-	*Includes grouser height for total dimensions on hard surfaces.
Width - Without Trunnions - 610 mm/24 in ES	-	-	130.4 in
Length - With SU-Blade	-	-	292 in
Winches
Winch Model	PA 140VS	-	-
Weight*	3950 lb	-	-
Oil Capacity	4 gal (US)	-	-
Drum Width	12.6 in	-	-
Wire Cable Diameter - Recommended	1.13 in	-	-
Wire Cable Diameter - Optional	1.25 ft	-	-
Maximum Drum Capacity - Recommended Cable Length	257 in	-	-
Maximum Drum Capacity - Optional Cable Length	204 ft	-	-
Wire Cable Ferrule Size - Outside Diameter	2.4 in	-	-
Wire Cable Ferrule Size - Length	2.8 in	-	-
Note	*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).	-	-
Note (2)	Variable speed, hydraulically driven, dual braking system, three-roller fairlead.	-	-
Blades
Semi-Universal (SU)* Capacity	-	35.6 yd³	-
Semi-Universal (SU)* Width Over Endbits	-	219.8 in	-
U-Blade Capacity	-	45 yd³	-
U-Blade Width	-	249.6 in	-
Reclamation Universal - Blade capacity (SAE J1265)	-	55 yd³	-
Reclamation Universal - Width with blade (over end bits)	-	251.8 in	-
Carry Dozer - Blade capacity (SAE J1265)	-	57 yd³	-
Carry Dozer - Width with blade (over end bits)	-	263.9 in	-
10SU ABR - Capacity (SAE J1265)	-	-	24.2 yd³
10SU ABR - Width (over end bits)	-	-	194.5 in
10SU ABR - Height	-	-	83.5 in
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	-	19.98 in
10SU ABR - Digging Depth - Blade Pitch: Nominal	-	-	25.23 in
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	-	30.08 in³
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	-	66.14 in
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	-	53.86 in
10SU ABR - Ground Clearance - Maximum Tilt LH	-	-	56.3 in
10SU ABR - Ground Clearance - Maximum Tilt RH	-	-	56.3 in
10U ABR - Capacity (SAE J1265)	-	-	28.7 yd³
10U ABR - Width (over end bits)	-	-	207.1 in
10U ABR - Height	-	-	83.5 in
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	-	19.98 in
10U ABR - Digging Depth - Blade Pitch: Nominal	-	-	60 in
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	-	30.1 in
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	-	66.1 in
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	-	53.9 in
10U ABR - Ground Clearance - Maximum Tilt LH	-	-	60.8 in
10U ABR - Ground Clearance - Maximum Tilt RH	-	-	60.8 in
10U ABR - Weights - Blade Weight*	-	-	23585 lb
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)	-	-	154888 lb
Note (1)	-	-	Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
Note (2)	-	-	*Does not include hydraulic controls but includes blade cylinders, pusharms.
Note (3)	-	-	**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	-	Cat® C32	Cat® C27
Displacement	-	1959 in³	1648 in³
Engine Power - Net SAE J1349/ISO 9249 - Forward	-	850 HP	-
Engine Power - Net SAE J1349/ISO 9249 - Reverse	-	957 HP	-
Note (1)	-	*Excludes all fan losses.	*Excludes all fan losses.
Note (2)	-	Engine ratings apply at 1,800 rpm.	All Engine ratings apply at 1,800 rpm.
Note (3)	-	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	-	603 HP
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	-	722 HP
Engine Power - Gross SAE J1995* - Forward	-	-	631 HP
Engine Power - Gross SAE J1995* - Reverse	-	-	766 HP
Engine Power - ISO 14396* - Forward	-	-	622 HP
Engine Power - ISO 14396* - Reverse	-	-	756 HP
Bore	-	-	5.4 in
Stroke	-	-	6 in
Emissions	-	-	U.S. EPA Tier 2 Equivalent
Note (4)	-	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
Note (5)	-	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
Fuel Tank Capacities
Fuel Tank - Total Volume	-	500 gal (US)	335.2 gal (US)
Fuel Tank - Usable Volume	-	475 gal (US)	323.3 gal (US)
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)	-	149.8 in	-
Length with SU-Blade** - No rear attachment	-	345.1 in	-
Overall Length SU-Blade and SS Ripper**	-	421.7 in	-
Service Refill Capacities
Cooling System	-	46.8 gal (US)	-
Cooling System Refill - Tier 2 Equivalent Engine	-	41.7 gal (US)	-
Engine Crankcase	-	35.1 gal (US)	-
Power Train	-	120 gal (US)	-
Power Train - Refill Volume	-	103.3 gal (US)	-
Final Drive - Each	-	12.4 gal (US)	-
Roller Frames - Each	-	24.8 gal (US)	-
Hydraulic Tank	-	42.2 gal (US)	-
Hydraulic System Tank and Chassis	-	64.7 gal (US)	-
Hydraulic System Chassis + Blade and Ripper (Standard)	-	117.6 gal (US)	-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)	-	143.4 gal (US)	-
Dimensions - D11
Ground Clearance*	-	31.4 in	-
Track Gauge	-	114 in	-
Width at Outside of Track (710 mm Track Shoe)	-	142 in	-
Height (ROPS/canopy)*	-	185.9 in	-
Length of Track on Ground	-	175 in	-
Length with SU-Blade** - No rear attachment	-	337.8 in	-
Overall Length SU-Blade and SS Ripper**	-	414.4 in	-
Note	-	*Includes grouser height for total dimensions on hard surfaces.	-

Compare Equipment Go Back

D9 Dozer

D11 Dozer

D10 Dozer

Engine - U.S. EPA Tier 2/3 Equivalent

Weights

Undercarriage

Standards

Steering and Brakes

Engine - U.S. EPA Tier 4 Final/EU Stage V

FLUID CAPACITIES

Hydraulic Controls

Air Conditioning System

Transmission

Blade - Semi-Universal

Blade - Universal

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Ripper - Multi-Shank, Adjustable Parallelogram

Dimensions (Approximate)

Winches

Blades

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Dimensions - D11 Carrydozer

Service Refill Capacities

Dimensions - D11

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us