No derating required up to 4267 m (14,000 ft) altitude.
-
-
Weights
Operating Weight
110225 lb
229800 lb
-
Shipping Weight
84373 lb
-
-
Note (1)
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
-
Note (2)
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
-
Operating Weight - Carrydozer
-
250665 lb
-
Undercarriage
Shoe Type
Extreme Service
Extreme Service
-
Width - Shoe
24 in
28 in
-
Shoes/Side
43
41
-
Grouser Height
3.3 in
4 in
-
Pitch
9.4 in
12.5 in
-
Ground Clearance
18.1 in
-
-
Track Gauge
88.6 in
114 in
-
Length - Track on Ground
136.6 in
175 in
-
Ground Contact Area
45.6 ft²
9781 in²
-
Track Rollers/Side
8
8
-
Number of Carrier Rollers
1 per side (optional)
1 per side (optional)
-
Width - Shoe - CD
-
36 in
-
Ground Clearance*
-
30.6 in
-
Ground Contact Area - CD
-
12605 in²
-
Standards
ROPS
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
-
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
-
Sound
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
-
-
Sound (1)
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
-
Sound (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).
-
Steering and Brakes
Steering Type
Differential
-
-
Brake Type
Spring Applied Wet Disc
-
-
Brake Diameter
15.5 in
-
-
Brake Count
8
-
-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model
Cat® C18
Cat® C32
-
Bore
5.7 in³
-
-
Stroke
7.2 in³
-
-
Displacement
1106 in³
1959 in³
-
Engine Power - Gross SAE J1995
477 HP
-
-
Engine Power - ISO 14396
468 HP
-
-
Engine Power - Net SAE J1349/ISO 9249
440 HP
-
-
Emissions
U.S. EPA Tier 4 / EU Stage V
-
-
Note (1)
All Engine ratings apply at 1,750 rpm.
*Excludes all fan losses.
-
Note (2)
No derating required up to 2499 m (8,200 ft).
Engine ratings apply at 1,800 rpm.
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
-
850 HP
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
-
955 HP
-
Note (3)
-
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-
FLUID CAPACITIES
Fuel Tank (Splash Fill)
254 gal (US)
-
-
DEF Tank (Tier 4 only)
9.5 gal (US)
-
-
Fuel Tank (Fast Fill)
248 gal (US)
-
-
Cooling System
21 gal (US)
-
-
Engine Crankcase*
10 gal (US)
-
-
Powertrain
40 gal (US)
-
-
Final Drives (each)
4 gal (US)
-
-
Roller Frames (each)
12 gal (US)
-
-
Pivot Shaft Oil
8 gal (US)
-
-
Hydraulic System Tank
24 gal (US)
-
-
Note
*With oil filters.
-
-
Note 2
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
-
-
Note 3
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
-
-
Note 4
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
-
-
Hydraulic Controls
Pump Type
Piston-type geared to flywheel
Variable displacement piston pump
-
Pump Output - Steering
96 gal/min
-
-
Fan Pump
21 gal/min
-
-
Tilt Cylinder Flow - Rod End Flow
53 gal/min
-
-
Tilt Cylinder Flow - Head End Flow
53 gal/min
-
-
Lift Cylinder Relief Valve Setting
3800 lbf/in
-
-
Tilt Cylinder Relief Valve Setting
2799 psi
-
-
Ripper - Lift - Relief Valve Setting
3800 psi
-
-
Ripper - Pitch - Relief Valve Setting
3800 psi
-
-
Steering System - Pressure
5874 psi
-
-
Tank Capacity
24 gal/min
-
-
Note (1)
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
-
-
Note (2)
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
-
-
Note (3)
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
-
-
Combined Pump Output - Implement
-
177 gal/min
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
-
-
Note (1)
-
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)
-
Transmission
1.0 Forward
2.2 mile/h
2.5 mile/h
-
2.0 Forward
3.9 mile/h
4.4 mile/h
-
3.0 Forward
6.8 mile/h
7.6 mile/h
-
1.0 Reverse
2.7 mile/h
3 mile/h
-
2.0 Reverse
4.8 mile/h
5.3 mile/h
-
3.0 Reverse
8.4 mile/h
9.1 mile/h
-
Type
Planetary powershift
-
-
Drawbar Pull - 3 Forward
-
46250 ft·lbf
-
Drawbar Pull - 1 Forward
-
148200 ft·lbf
-
Drawbar Pull - 2 Forward
-
82300 ft·lbf
-
Blade - Semi-Universal
Blade Capacity (SAE J1265)
17.8 yd³
-
-
Blade Width (over end bits)
171.3 in
-
-
Blade Height
76.1 in
-
-
Maximum Digging Depth
23.9 in
-
-
Ground Clearance at Full Lift
56 in
-
-
Maximum Tilt
37 in
-
-
Blade Weight
10587 lb
-
-
Total Operating Weight* (with blade and single-shank ripper)
110205 lb
-
-
Note
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
-
Blade - Universal
Blade Capacity (SAE J1265)
21.7 yd³
-
-
Blade Width (over end bits)
184.3 in
-
-
Blade Height
76.1 in
-
-
Maximum Digging Depth
23.9 in
-
-
Ground Clearance at Full Lift
56 in
-
-
Maximum Tilt
39.9 in
-
-
Blade Weight
12016 lb
-
-
Total Operating Weight* (with blade and single-shank ripper)
111362 lb
-
-
Note
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
35520 lbf
66000 lb
-
Maximum penetration depth (standard tip)
48.5 in
63.5 in
-
Pryout Force
74637 lbf
148510 lb
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
34.7 in
-
-
Number of Pockets
1
-
-
Weight
10701 lb
-
-
Total Operating Weight* (with SU Blade and noted ripper)
110205 lb
-
-
Note
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes
and the noted blade and ripper type.
-
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
38667 lbf
66110 lb
-
Maximum penetration depth (standard tip)
68 in
85.5 in
-
Pryout Force
74412 lbf
148510 lb
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
32.2 in
-
-
Number of Pockets
1
-
-
Weight
10981 lb
-
-
Total Operating Weight* (with SU Blade and noted ripper)
110485 lb
-
-
Note
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
-
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical
34621 lbf
77350 lb
-
Maximum Penetration - Standard Tip
31.4 in
43.3 in
-
Pry-Out Force - Multi-Shank Ripper with One Tooth
81156 lbf
145640 lb
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
34.6 in
-
-
Number of Pockets
3
-
-
Weight
12136 lb
-
-
Total Operating Weight* - With SU-Blade and Ripper
111739 lb
-
-
Note
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
-
Overall Beam Width
-
131.1 in
-
Dimensions (Approximate)
Ground Clearance*
18.1 in
-
-
Track Gauge
88.6 in
-
-
Width - Without Trunnions - Standard Shoe
113 in
-
-
Width - Over Trunnions
130.3 in
-
-
Height - FOPS Cab*
150.4 in
-
-
Height - Top of Stack*
152.6 in
-
-
Height - ROPS/Canopy*
157.5 in
-
-
Drawbar Height (Center of Clevis)*
30 in
-
-
Length - Track on Ground
136.6 in
-
-
Overall Length - Basic Tractor
193.3 in
-
-
Length - Basic Tractor - With Drawbar
206.4 in
-
-
Length - Basic Tractor - With Winch
218.3 in
-
-
Length - With SU-Blade**
259.9 in
-
-
Length - With U-Blade
274.3 in
-
-
Length - With Single-Shank Ripper
257 in
-
-
Length - With Multi-Shank Ripper
257.4 in
-
-
Overall Length - SU-Blade/SS Ripper
323.6 in
-
-
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
-
-
Winches
Winch Model
PA 140VS
-
-
Weight*
3950 lb
-
-
Oil Capacity
4 gal (US)
-
-
Drum Width
12.6 in
-
-
Wire Cable Diameter - Recommended
1.13 in
-
-
Wire Cable Diameter - Optional
1.25 ft
-
-
Maximum Drum Capacity - Recommended Cable Length
257 in
-
-
Maximum Drum Capacity - Optional Cable Length
204 ft
-
-
Wire Cable Ferrule Size - Outside Diameter
2.4 in
-
-
Wire Cable Ferrule Size - Length
2.8 in
-
-
Note
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Reclamation Universal - Width with blade (over end bits)
-
251.8 in
-
Carry Dozer - Blade capacity (SAE J1265)
-
57 yd³
-
Carry Dozer - Width with blade (over end bits)
-
263.9 in
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
-
Cat® C32
-
Displacement
-
1959 in³
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
-
850 HP
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
-
957 HP
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-
Fuel Tank Capacities
Fuel Tank - Total Volume
-
500 gal (US)
-
Fuel Tank - Usable Volume
-
475 gal (US)
-
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)
-
149.8 in
-
Length with SU-Blade** - No rear attachment
-
345.1 in
-
Overall Length SU-Blade and SS Ripper**
-
421.7 in
-
Service Refill Capacities
Cooling System
-
46.8 gal (US)
-
Cooling System Refill - Tier 2 Equivalent Engine
-
41.7 gal (US)
-
Engine Crankcase
-
35.1 gal (US)
-
Power Train
-
120 gal (US)
-
Power Train - Refill Volume
-
103.3 gal (US)
-
Final Drive - Each
-
12.4 gal (US)
-
Roller Frames - Each
-
24.8 gal (US)
-
Hydraulic Tank
-
42.2 gal (US)
-
Hydraulic System Tank and Chassis
-
64.7 gal (US)
-
Hydraulic System Chassis + Blade and Ripper (Standard)
-
117.6 gal (US)
-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)
-
143.4 gal (US)
-
Dimensions - D11
Ground Clearance*
-
31.4 in
-
Track Gauge
-
114 in
-
Width at Outside of Track (710 mm Track Shoe)
-
142 in
-
Height (ROPS/canopy)*
-
185.9 in
-
Length of Track on Ground
-
175 in
-
Length with SU-Blade** - No rear attachment
-
337.8 in
-
Overall Length SU-Blade and SS Ripper**
-
414.4 in
-
Note
-
*Includes grouser height for total dimensions on hard surfaces.