CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D9 Dozer
    View Product
    D11 Dozer
    View Product Remove
    D7 Dozer
    View Product Remove

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model Cat® C18 - -
    Engine Power - Net SAE J1349/ISO 9249 452 HP - -
    Bore 5.7 in³ - -
    Stroke 7.2 in - -
    Displacement 1106 in³ - -
    Engine Power - Gross SAE J1995 487 HP - -
    Engine Power - ISO 14396 479 HP - -
    Emissions U.S. EPA Tier 2 or Tier 3 equivalent - -
    Note (1) All engine ratings apply at 1,750 rpm. - -
    Note (2) No derating required up to 4267 m (14,000 ft) altitude. - -

    Weights
    Operating Weight 110225 lb 229800 lb 65644 lb
    Shipping Weight 84373 lb - -
    Note (1) D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar.
    Note (2) D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. -
    Operating Weight - Carrydozer - 250665 lb -

    Undercarriage
    Shoe Type Extreme Service Extreme Service -
    Width - Shoe 24 in 28 in -
    Shoes/Side 43 41 -
    Grouser Height 3.3 in 4 in -
    Pitch 9.4 in 12.5 in -
    Ground Clearance 18.1 in - -
    Track Gauge 88.6 in 114 in -
    Length - Track on Ground 136.6 in 175 in -
    Ground Contact Area 45.6 ft² 9781 in² -
    Track Rollers/Side 8 8 -
    Number of Carrier Rollers 1 per side (optional) 1 per side (optional) -
    Width - Shoe - CD - 36 in -
    Ground Clearance* - 30.6 in -
    Ground Contact Area - CD - 12605 in² -

    Standards
    ROPS Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 -
    FOPS Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II -
    Sound The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling - -
    Sound (1) The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). -
    Sound (2) Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). -

    Steering and Brakes
    Steering Type Differential - -
    Brake Type Spring Applied Wet Disc - -
    Brake Diameter 15.5 in - -
    Brake Count 8 - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat® C18 Cat® C32 -
    Bore 5.7 in³ - -
    Stroke 7.2 in³ - -
    Displacement 1106 in³ 1959 in³ -
    Engine Power - Gross SAE J1995 477 HP - -
    Engine Power - ISO 14396 468 HP - -
    Engine Power - Net SAE J1349/ISO 9249 440 HP - -
    Emissions U.S. EPA Tier 4 / EU Stage V - -
    Note (1) All Engine ratings apply at 1,750 rpm. *Excludes all fan losses. -
    Note (2) No derating required up to 2499 m (8,200 ft). Engine ratings apply at 1,800 rpm. -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 955 HP -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) 254 gal (US) - -
    DEF Tank (Tier 4 only) 9.5 gal (US) - -
    Fuel Tank (Fast Fill) 248 gal (US) - -
    Cooling System 21 gal (US) - -
    Engine Crankcase* 10 gal (US) - -
    Powertrain 40 gal (US) - -
    Final Drives (each) 4 gal (US) - -
    Roller Frames (each) 12 gal (US) - -
    Pivot Shaft Oil 8 gal (US) - -
    Hydraulic System Tank 24 gal (US) - -
    Note *With oil filters. - -
    Note 2 Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or - -
    Note 3 All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. - -
    Note 4 Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. - -

    Hydraulic Controls
    Pump Type Piston-type geared to flywheel Variable displacement piston pump -
    Pump Output - Steering 96 gal/min - -
    Fan Pump 21 gal/min - -
    Tilt Cylinder Flow - Rod End Flow 53 gal/min - -
    Tilt Cylinder Flow - Head End Flow 53 gal/min - -
    Lift Cylinder Relief Valve Setting 3800 lbf/in - -
    Tilt Cylinder Relief Valve Setting 2799 psi - -
    Ripper - Lift - Relief Valve Setting 3800 psi - -
    Ripper - Pitch - Relief Valve Setting 3800 psi - -
    Steering System - Pressure 5874 psi - -
    Tank Capacity 24 gal/min - -
    Note (1) Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). - -
    Note (2) Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). - -
    Note (3) Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) - -
    Combined Pump Output - Implement - 177 gal/min -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
    Note (1) - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) -

    Transmission
    1.0 Forward 2.2 mile/h 2.5 mile/h -
    2.0 Forward 3.9 mile/h 4.4 mile/h -
    3.0 Forward 6.8 mile/h 7.6 mile/h -
    1.0 Reverse 2.7 mile/h 3 mile/h -
    2.0 Reverse 4.8 mile/h 5.3 mile/h -
    3.0 Reverse 8.4 mile/h 9.1 mile/h -
    Type Planetary powershift - -
    Drawbar Pull - 3 Forward - 46250 ft·lbf -
    Drawbar Pull - 1 Forward - 148200 ft·lbf -
    Drawbar Pull - 2 Forward - 82300 ft·lbf -
    Power Train - - Fully Automatic 4-Speed

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) 17.8 yd³ - -
    Blade Width (over end bits) 171.3 in - -
    Blade Height 76.1 in - -
    Maximum Digging Depth 23.9 in - -
    Ground Clearance at Full Lift 56 in - -
    Maximum Tilt 37 in - -
    Blade Weight 10587 lb - -
    Total Operating Weight* (with blade and single-shank ripper) 110205 lb - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Blade - Universal
    Blade Capacity (SAE J1265) 21.7 yd³ - -
    Blade Width (over end bits) 184.3 in - -
    Blade Height 76.1 in - -
    Maximum Digging Depth 23.9 in - -
    Ground Clearance at Full Lift 56 in - -
    Maximum Tilt 39.9 in - -
    Blade Weight 12016 lb - -
    Total Operating Weight* (with blade and single-shank ripper) 111362 lb - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) 35520 lbf 66000 lb -
    Maximum penetration depth (standard tip) 48.5 in 63.5 in -
    Pryout Force 74637 lbf 148510 lb -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.7 in - -
    Number of Pockets 1 - -
    Weight 10701 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) 110205 lb - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) 38667 lbf 66110 lb -
    Maximum penetration depth (standard tip) 68 in 85.5 in -
    Pryout Force 74412 lbf 148510 lb -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 32.2 in - -
    Number of Pockets 1 - -
    Weight 10981 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) 110485 lb - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical 34621 lbf 77350 lb -
    Maximum Penetration - Standard Tip 31.4 in 43.3 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth 81156 lbf 145640 lb -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.6 in - -
    Number of Pockets 3 - -
    Weight 12136 lb - -
    Total Operating Weight* - With SU-Blade and Ripper 111739 lb - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -
    Overall Beam Width - 131.1 in -

    Dimensions (Approximate)
    Ground Clearance* 18.1 in - -
    Track Gauge 88.6 in - -
    Width - Without Trunnions - Standard Shoe 113 in - -
    Width - Over Trunnions 130.3 in - -
    Height - FOPS Cab* 150.4 in - -
    Height - Top of Stack* 152.6 in - -
    Height - ROPS/Canopy* 157.5 in - -
    Drawbar Height (Center of Clevis)* 30 in - -
    Length - Track on Ground 136.6 in - -
    Overall Length - Basic Tractor 193.3 in - -
    Length - Basic Tractor - With Drawbar 206.4 in - -
    Length - Basic Tractor - With Winch 218.3 in - -
    Length - With SU-Blade** 259.9 in - -
    Length - With U-Blade 274.3 in - -
    Length - With Single-Shank Ripper 257 in - -
    Length - With Multi-Shank Ripper 257.4 in - -
    Overall Length - SU-Blade/SS Ripper 323.6 in - -
    Note (1) *Includes grouser height for total dimensions on hard surfaces. - -

    Winches
    Winch Model PA 140VS - -
    Weight* 3950 lb - -
    Oil Capacity 4 gal (US) - -
    Drum Width 12.6 in - -
    Wire Cable Diameter - Recommended 1.13 in - -
    Wire Cable Diameter - Optional 1.25 ft - -
    Maximum Drum Capacity - Recommended Cable Length 257 in - -
    Maximum Drum Capacity - Optional Cable Length 204 ft - -
    Wire Cable Ferrule Size - Outside Diameter 2.4 in - -
    Wire Cable Ferrule Size - Length 2.8 in - -
    Note *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). - -
    Note (2) Variable speed, hydraulically driven, dual braking system, three-roller fairlead. - -

    Blades
    Semi-Universal (SU)* Capacity - 35.6 yd³ -
    Semi-Universal (SU)* Width Over Endbits - 219.8 in -
    U-Blade Capacity - 45 yd³ -
    U-Blade Width - 249.6 in -
    Reclamation Universal - Blade capacity (SAE J1265) - 55 yd³ -
    Reclamation Universal - Width with blade (over end bits) - 251.8 in -
    Carry Dozer - Blade capacity (SAE J1265) - 57 yd³ -
    Carry Dozer - Width with blade (over end bits) - 263.9 in -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C32 -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 957 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - 500 gal (US) -
    Fuel Tank - Usable Volume - 475 gal (US) -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - 149.8 in -
    Length with SU-Blade** - No rear attachment - 345.1 in -
    Overall Length SU-Blade and SS Ripper** - 421.7 in -

    Service Refill Capacities
    Cooling System - 46.8 gal (US) -
    Cooling System Refill - Tier 2 Equivalent Engine - 41.7 gal (US) -
    Engine Crankcase - 35.1 gal (US) -
    Power Train - 120 gal (US) -
    Power Train - Refill Volume - 103.3 gal (US) -
    Final Drive - Each - 12.4 gal (US) -
    Roller Frames - Each - 24.8 gal (US) -
    Hydraulic Tank - 42.2 gal (US) -
    Hydraulic System Tank and Chassis - 64.7 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Standard) - 117.6 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - 143.4 gal (US) -
    Fuel Tank - - 123 gal (US)
    DEF Tank - - 12 gal (US)

    Dimensions - D11
    Ground Clearance* - 31.4 in -
    Track Gauge - 114 in -
    Width at Outside of Track (710 mm Track Shoe) - 142 in -
    Height (ROPS/canopy)* - 185.9 in -
    Length of Track on Ground - 175 in -
    Length with SU-Blade** - No rear attachment - 337.8 in -
    Overall Length SU-Blade and SS Ripper** - 414.4 in -
    Note - *Includes grouser height for total dimensions on hard surfaces. -

    Engine
    Engine Model - - Cat C9.3B
    Power - Net - - 265 HP
    Net Power - Rated - ISO 9249/SAE J1349 - - 265 HP
    Net Power (Rated) - ISO 9249 (DIN) - - 268 mhp
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV
    Note (1) - - Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t
    Note (2) - - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
    Note (3) - - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
    Note (4) - - Machine Build Number 17A

    Standard SU
    Operating Weight - - 65644 lb
    Ground Pressure - - 10 psi
    Width of Standard Shoe - - 24 in
    Blade - - Semi-Universal (SU)
    Blade Capacity - - 10 yd³

    LGP S
    Operating Weight - - 63220 lb
    Ground Pressure - - 6 psi
    Width of Standard Shoe - - 36 in
    Blade - - Straight (S)
    Blade Capacity - - 8 yd³

    Waste Handler
    Operating Weight - - 62035 lb
    Ground Pressure - - 10 psi
    Width of Standard Shoe - - 24 in
    Blade - - Universal Landfill (U)
    Blade Capacity - - 22 yd³

    Sustainability
    Recyclability - - 98%

    Note (2) - - Configurations and features may vary by region. Please consult your Cat dealer for availability in your area.
    Add a Similar Product: