|
|
|
|
|
Engine |
Engine Model |
Cat C9.3B |
- |
- |
Cat C3.6 |
Power - Net |
265 HP |
- |
- |
80 HP |
Net Power - Rated - ISO 9249/SAE J1349 |
265 HP |
- |
- |
- |
Net Power (Rated) - ISO 9249 (DIN) |
268 mhp |
- |
- |
- |
Emissions |
U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV |
- |
- |
- |
Note (1) |
Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t |
- |
- |
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
Note (2) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( |
- |
- |
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
Note (3) |
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. |
- |
- |
- |
Note (4) |
Machine Build Number 17A |
- |
- |
- |
Displacement |
- |
- |
- |
220 in³ |
Net Power - 2,200 rpm - SAE J1349 |
- |
- |
- |
80 HP |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 |
- |
- |
- |
80 HP |
Power Train |
- |
- |
- |
Hydrostatic |
Weights |
Operating Weight |
65644 lb |
229800 lb |
- |
17855 lb |
Note (1) |
Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. |
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. |
- |
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Operating Weight - Carrydozer |
- |
250665 lb |
- |
- |
Note (2) |
- |
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. |
- |
For machine with ripper, add 554 kg (1,222 lb). |
Operating Weight - LGP |
- |
- |
- |
18839 lb |
Operating Weight - LGP, 762 mm/30 in |
- |
- |
- |
19295 lb |
Transmission |
Power Train |
Fully Automatic 4-Speed |
- |
- |
- |
1.0 Forward |
- |
2.5 mile/h |
- |
- |
2.0 Forward |
- |
4.4 mile/h |
- |
- |
3.0 Forward |
- |
7.6 mile/h |
- |
- |
1.0 Reverse |
- |
3 mile/h |
- |
- |
2.0 Reverse |
- |
5.3 mile/h |
- |
- |
3.0 Reverse |
- |
9.1 mile/h |
- |
- |
Drawbar Pull - 3 Forward |
- |
46250 ft·lbf |
- |
- |
Drawbar Pull - 1 Forward |
- |
148200 ft·lbf |
- |
- |
Drawbar Pull - 2 Forward |
- |
82300 ft·lbf |
- |
- |
Transmission Type |
- |
- |
Cat Planetary Power Shift |
- |
Forward - 1 |
- |
- |
3.7 mile/h |
- |
Forward - 2 |
- |
- |
6.5 mile/h |
- |
Forward - 3 |
- |
- |
11.2 mile/h |
- |
Forward - 4 |
- |
- |
19.4 mile/h |
- |
Reverse - 1 |
- |
- |
4.2 mile/h |
- |
Reverse - 2 |
- |
- |
7.3 mile/h |
- |
Reverse - 3 |
- |
- |
12.8 mile/h |
- |
Reverse - 4 |
- |
- |
22.1 mile/h |
- |
Drive Pumps |
- |
- |
- |
1 |
Maximum Travel Speed - Reverse |
- |
- |
- |
6.2 mile/h |
Relief Valve Settings |
- |
- |
- |
7033 psi |
Maximum Travel Speed - Forward |
- |
- |
- |
5.6 mile/h |
Track Motors |
- |
- |
- |
2 |
Service Refill Capacities |
Fuel Tank |
123 gal (US) |
- |
132.1 gal (US) |
51.5 gal (US) |
DEF Tank |
12 gal (US) |
- |
- |
- |
Cooling System |
- |
46.8 gal (US) |
- |
4.2 gal (US) |
Cooling System Refill - Tier 2 Equivalent Engine |
- |
41.7 gal (US) |
- |
- |
Engine Crankcase |
- |
35.1 gal (US) |
5.3 gal (US) |
- |
Power Train |
- |
120 gal (US) |
- |
- |
Power Train - Refill Volume |
- |
103.3 gal (US) |
- |
- |
Final Drive - Each |
- |
12.4 gal (US) |
- |
- |
Roller Frames - Each |
- |
24.8 gal (US) |
- |
- |
Hydraulic Tank |
- |
42.2 gal (US) |
- |
- |
Hydraulic System Tank and Chassis |
- |
64.7 gal (US) |
- |
- |
Hydraulic System Chassis + Blade and Ripper (Standard) |
- |
117.6 gal (US) |
- |
- |
Hydraulic System Chassis + Blade and Ripper (Carrydozer) |
- |
143.4 gal (US) |
- |
- |
Diesel Exhaust Fluid Tank |
- |
- |
4.2 gal (US) |
- |
Cooling Systems - Tier 4 Final/EU Stage V |
- |
- |
21.4 gal (US) |
- |
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA |
- |
- |
19.3 gal (US) |
- |
Transmission |
- |
- |
13.2 gal (US) |
- |
Differential - Final Drives - Front |
- |
- |
17.2 gal (US) |
- |
Differential - Final Drives - Rear |
- |
- |
17.2 gal (US) |
- |
Hydraulic System - Implement/Steering |
- |
- |
34.1 gal (US) |
- |
Hydraulic Tank Only |
- |
- |
19.8 gal (US) |
- |
Final Drive - Each - LGP |
- |
- |
- |
2.6 gal (US) |
Diesel Exhaust Fluid (DEF) Tank |
- |
- |
- |
4.9 gal (US) |
Transmission - Hydraulic Tank |
- |
- |
- |
23.8 gal (US) |
Crankcase - With Filter |
- |
- |
- |
2.8 gal (US) |
Final Drives - Each Side |
- |
- |
- |
2.6 gal (US) |
Standard SU |
Operating Weight |
65644 lb |
- |
- |
- |
Ground Pressure |
10 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
Semi-Universal (SU) |
- |
- |
- |
Blade Capacity |
10 yd³ |
- |
- |
- |
LGP S |
Operating Weight |
63220 lb |
- |
- |
- |
Ground Pressure |
6 psi |
- |
- |
- |
Width of Standard Shoe |
36 in |
- |
- |
- |
Blade |
Straight (S) |
- |
- |
- |
Blade Capacity |
8 yd³ |
- |
- |
- |
Waste Handler |
Operating Weight |
62035 lb |
- |
- |
- |
Ground Pressure |
10 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
Universal Landfill (U) |
- |
- |
- |
Blade Capacity |
22 yd³ |
- |
- |
- |
Sustainability |
Recyclability |
98% |
- |
- |
- |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. |
- |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Note (1) |
- |
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) |
- |
- |
|
Note (2) |
Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. |
- |
- |
- |
Engine - U.S. EPA Tier 4 Final/EU Stage V |
Engine Model |
- |
Cat® C32 |
- |
- |
Engine Power - Net SAE J1349/ISO 9249 - Forward |
- |
850 HP |
- |
- |
Displacement |
- |
1959 in³ |
- |
- |
Engine Power - Net SAE J1349/ISO 9249 - Reverse |
- |
955 HP |
- |
- |
Note (1) |
- |
*Excludes all fan losses. |
- |
- |
Note (2) |
- |
Engine ratings apply at 1,800 rpm. |
- |
- |
Note (3) |
- |
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
- |
- |
Blades |
Semi-Universal (SU)* Capacity |
- |
35.6 yd³ |
- |
- |
Semi-Universal (SU)* Width Over Endbits |
- |
219.8 in |
- |
- |
U-Blade Capacity |
- |
45 yd³ |
- |
- |
U-Blade Width |
- |
249.6 in |
- |
- |
Reclamation Universal - Blade capacity (SAE J1265) |
- |
55 yd³ |
- |
- |
Reclamation Universal - Width with blade (over end bits) |
- |
251.8 in |
- |
- |
Carry Dozer - Blade capacity (SAE J1265) |
- |
57 yd³ |
- |
- |
Carry Dozer - Width with blade (over end bits) |
- |
263.9 in |
- |
- |
Engine - U.S. EPA Tier 2 Equivalent |
Engine Model |
- |
Cat® C32 |
- |
- |
Displacement |
- |
1959 in³ |
- |
- |
Engine Power - Net SAE J1349/ISO 9249 - Forward |
- |
850 HP |
- |
- |
Engine Power - Net SAE J1349/ISO 9249 - Reverse |
- |
957 HP |
- |
- |
Note (1) |
- |
*Excludes all fan losses. |
- |
- |
Note (2) |
- |
Engine ratings apply at 1,800 rpm. |
- |
- |
Note (3) |
- |
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
- |
- |
Fuel Tank Capacities |
Fuel Tank - Total Volume |
- |
500 gal (US) |
- |
- |
Fuel Tank - Usable Volume |
- |
475 gal (US) |
- |
- |
Hydraulic Controls |
Pump Type |
- |
Variable displacement piston pump |
- |
- |
Combined Pump Output - Implement |
- |
177 gal/min |
- |
- |
Pump Output |
- |
- |
- |
17.2 gal/min |
Relief Valve Settings |
- |
- |
- |
2988 psi |
Undercarriage |
Shoe Type |
- |
Extreme Service |
- |
- |
Width - Shoe |
- |
28 in |
- |
- |
Width - Shoe - CD |
- |
36 in |
- |
- |
Shoes/Side |
- |
41 |
- |
- |
Grouser Height |
- |
4 in |
- |
- |
Pitch |
- |
12.5 in |
- |
- |
Ground Clearance* |
- |
30.6 in |
- |
- |
Track Gauge |
- |
114 in |
- |
59 in |
Length - Track on Ground |
- |
175 in |
- |
- |
Ground Contact Area |
- |
9781 in² |
- |
- |
Ground Contact Area - CD |
- |
12605 in² |
- |
- |
Track Rollers/Side |
- |
8 |
- |
- |
Number of Carrier Rollers |
- |
1 per side (optional) |
- |
- |
Length - Track on Ground - LGP, 762 mm (30 in) |
- |
- |
- |
89 in |
Length - Track on Ground - LGP |
- |
- |
- |
89 in |
Track Gauge - LGP |
- |
- |
- |
68 in |
Shoe Width - LGP, 762 mm (30 in) |
- |
- |
- |
30 in |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
- |
73 in |
Shoe Width - LGP |
- |
- |
- |
25 in |
Shoe Width - Standard |
- |
- |
- |
16 in |
Ground Pressure - LGP |
- |
- |
- |
4.3 psi |
Ground Pressure - LGP, 762 mm (30 in) |
- |
- |
- |
3.7 psi |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage |
- |
- |
- |
43 |
Number of Rollers - Each Side |
- |
- |
- |
6 |
Length of Track on Ground |
- |
- |
- |
89 in |
Number of Shoes - Each Side - Abrasion Undercarriage |
- |
- |
- |
38 |
Ground Pressure |
- |
- |
- |
6.45 psi |
Ripper - Single Shank |
Maximum penetration force * (shank vertical) |
- |
66000 lb |
- |
- |
Maximum penetration depth (standard tip) |
- |
63.5 in |
- |
- |
Pryout Force |
- |
148510 lb |
- |
- |
Ripper - Single Shank, Deep Ripping |
Maximum penetration force * (shank vertical) |
- |
66110 lb |
- |
- |
Maximum penetration depth (standard tip) |
- |
85.5 in |
- |
- |
Pryout Force |
- |
148510 lb |
- |
- |
Ripper - Multi-Shank, Adjustable Parallelogram |
Overall Beam Width |
- |
131.1 in |
- |
- |
Maximum Penetration Force - Shank Vertical |
- |
77350 lb |
- |
- |
Maximum Penetration - Standard Tip |
- |
43.3 in |
- |
- |
Pry-Out Force - Multi-Shank Ripper with One Tooth |
- |
145640 lb |
- |
- |
Dimensions - D11 Carrydozer |
Width at Outside of Track (710 mm Track Shoe) |
- |
149.8 in |
- |
- |
Length with SU-Blade** - No rear attachment |
- |
345.1 in |
- |
- |
Overall Length SU-Blade and SS Ripper** |
- |
421.7 in |
- |
- |
Standards |
ROPS |
- |
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 |
- |
- |
FOPS |
- |
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II |
- |
- |
Sound (1) |
- |
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). |
- |
- |
Sound (2) |
- |
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). |
- |
- |
Dimensions - D11 |
Ground Clearance* |
- |
31.4 in |
- |
- |
Track Gauge |
- |
114 in |
- |
- |
Width at Outside of Track (710 mm Track Shoe) |
- |
142 in |
- |
- |
Height (ROPS/canopy)* |
- |
185.9 in |
- |
- |
Length of Track on Ground |
- |
175 in |
- |
- |
Length with SU-Blade** - No rear attachment |
- |
337.8 in |
- |
- |
Overall Length SU-Blade and SS Ripper** |
- |
414.4 in |
- |
- |
Note |
- |
*Includes grouser height for total dimensions on hard surfaces. |
- |
- |
Engine - Tier 4 Final/EU Stage V |
Engine Model |
- |
- |
Cat C7.1 |
- |
Net Power (SAE J1349:2011) |
- |
- |
249 HP |
- |
Net Power (ISO 9249:2007) |
- |
- |
249 HP |
- |
Emissions |
- |
- |
U.S. EPA Tier 4 Final/EU Stage V |
- |
Rated Speed |
- |
- |
2200 r/min |
- |
Gross Power (SAE J1995:2014) |
- |
- |
284 HP |
- |
Engine Power (ISO 14396:2002) |
- |
- |
275 HP |
- |
Peak Torque - 1,400 rpm |
- |
- |
902 lb/ft |
- |
Torque Rise |
- |
- |
52% |
- |
Bore |
- |
- |
4.1 in |
- |
Stroke |
- |
- |
5.3 in |
- |
Displacement |
- |
- |
427.8 in³ |
- |
High Idle Speed |
- |
- |
2270 r/min |
- |
Low Idle Speed |
- |
- |
800 r/min |
- |
Maximum Altitude without Derating |
- |
- |
9842.5 ft |
- |
Note |
- |
- |
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
- |
Operating Specifications - Tier 4 Final/EU Stage V |
Operating Weight |
- |
- |
48526 lb |
- |
Scoops |
Chip Scoop Doze Capacity |
- |
- |
37.9 yd³ |
- |
Chip Scoop Carry Capacity |
- |
- |
19 yd³ |
- |
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Engine Model |
- |
- |
Cat C7.1 |
- |
Emissions |
- |
- |
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA |
- |
Rated Speed |
- |
- |
2200 r/min |
- |
Net Power (SAE J1349:2011) |
- |
- |
249 HP |
- |
Gross Power (SAE J1995:2014) |
- |
- |
286 HP |
- |
Engine Power (ISO 14396:2002) |
- |
- |
275 HP |
- |
Peak Torque - 1,400 rpm |
- |
- |
749 lb/ft |
- |
Torque Rise |
- |
- |
26% |
- |
Bore |
- |
- |
4.1 in |
- |
Stroke |
- |
- |
5.3 in |
- |
Displacement |
- |
- |
427.8 in³ |
- |
High Idle Speed |
- |
- |
2270 r/min |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Operating Weight |
- |
- |
47887 lb |
- |
Operating Specifications - Tier 4 Final/EU Stage V - Scoop |
Operating Weight |
- |
- |
52280 lb |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop |
Operating Weight |
- |
- |
51639 lb |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
- |
Pilot operated LS valve with EH |
- |
Lift/Tilt System |
- |
- |
Variable displacement piston |
- |
Maximum Flow at 2,200 rpm |
- |
- |
23.5 gal/min |
- |
Relief Valve Setting - Lift/Tilt |
- |
- |
3190 psi |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
- |
120 mm × 915 mm (4.7 in × 36.0 in) |
- |
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke |
- |
- |
101.6 mm × 234 mm (4.0 in × 9.2 in) |
- |
Pilot System |
- |
- |
Open center, fixed displacement gear |
- |
Pilot Relief Valve Setting |
- |
- |
3046 psi |
- |
Hydraulic System - Steering |
Steering System - Circuit |
- |
- |
Pilot, load sensing |
- |
Steering System - Pump |
- |
- |
Variable displacement piston |
- |
Maximum Flow at 2,200 rpm |
- |
- |
38.8 gal/min |
- |
Relief Valve Setting - Steering |
- |
- |
4003 psi |
- |
Total Steering Angle |
- |
- |
72° |
- |
Steering Cycle Times - High Idle |
- |
- |
3 s |
- |
Steering Cycle Times - Low Idle |
- |
- |
8.2 s |
- |
Axles |
Front |
- |
- |
Planetary – Fixed |
- |
Rear |
- |
- |
Planetary – Oscillating |
- |
Oscillation Angle |
- |
- |
±10° |
- |
Braking System |
Service Brakes |
- |
- |
Single Disc Wet (enclosed) 4 WHL |
- |
Parking Brake |
- |
- |
Drum and Shoe, Spring Applied, Hydraulic Released |
- |
Dimensions (Approximate) |
Height to Top of Beacon |
- |
- |
13.1 ft |
- |
Height - Top of Cab |
- |
- |
12.1 ft |
- |
Height - Top of Exhaust Pipe |
- |
- |
11.3 ft |
- |
Height - Top of Hood |
- |
- |
8.7 ft |
- |
Height to Top of Radiator Guard |
- |
- |
8 ft |
- |
Ground Clearance to Hitch |
- |
- |
1.4 ft |
- |
Ground Clearance to Transmission Guard |
- |
- |
1.4 ft |
- |
Ground Clearance to Bottom of Bumper |
- |
- |
2.3 ft |
- |
Centerline of Rear Axle to Bumper |
- |
- |
6.5 ft |
- |
Centerline of Front Axle to Hitch |
- |
- |
5.5 ft |
- |
Wheel Base |
- |
- |
11 ft |
- |
Width over Platform |
- |
- |
10.3 ft |
- |
Overall Length to Front Tire |
- |
- |
21 ft |
- |
Overall Machine Length with Straight Blade |
- |
- |
23.6 ft |
- |
Overall Machine Length with Coal Blade |
- |
- |
25.5 ft |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
- |
- |
70 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
- |
111 dB(A) |
- |
Note (1) |
- |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (2) |
- |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (4) |
- |
- |
The operator sound pressure level uncertainty is ± 2 dB(A) |
- |
Sound Performance - Tier 4 Final/EU Stage V - Suppression |
Operator Sound Level (ISO 6396) |
- |
- |
70 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
- |
109 dB(A) |
- |
Note (1) |
- |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (2) |
- |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (4) |
- |
- |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard |
Operator Sound Level (ISO 6396) |
- |
- |
70 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
- |
112 dB(A) |
- |
Note (1) |
- |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (2) |
- |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (4) |
- |
- |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression |
Operator Sound Level (ISO 6396) |
- |
- |
70 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
- |
110 dB(A) |
- |
Note (1) |
- |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (2) |
- |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (4) |
- |
- |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
Ripper |
Type |
- |
- |
- |
Parallelogram |
Number of Shanks |
- |
- |
- |
3 |
Height |
- |
- |
- |
6.5 in |
Weight |
- |
- |
- |
1222 lb |
Maximum Ground Clearance Under Tip |
- |
- |
- |
17.6 in |
Maximum Digging Depth |
- |
- |
- |
13.3 in |
Overall Width |
- |
- |
- |
67.3 in |
Maximum Reach - Ground Line |
- |
- |
- |
30.2 in |
Cab |
FOPS |
- |
- |
- |
ISO 3449:2005 Level II |
ROPS |
- |
- |
- |
ISO 3471:2008 |
Dimensions |
BLADE: Blade Capacity (SAE) - LGP |
- |
- |
- |
2.17 yd³ |
BLADE: Blade Lift Height - LGP |
- |
- |
- |
28.7 in |
BLADE: Maximum Tilt - LGP |
- |
- |
- |
17.2 in |
BLADE: Blade Width - LGP |
- |
- |
- |
124 in |
Ground Clearance - LGP |
- |
- |
- |
13 in |
BLADE: Blade Width at Maximum Angle - LGP |
- |
- |
- |
113.1 in |
BLADE: Digging Depth - LGP |
- |
- |
- |
23 in |
Track Gauge - LGP |
- |
- |
- |
67.9 in |
Ground Clearance - LGP, 762 mm (30 in) |
- |
- |
- |
13 in |
BLADE: Blade Height - LGP |
- |
- |
- |
33.8 in |
Overall Length - With Blade - LGP, 762 mm (30 in) |
- |
- |
- |
167.8 in |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
- |
73 in |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP |
- |
- |
- |
52° to 58° |
Note |
- |
- |
- |
*Abrasion Undercarriage |
BLADE: Maximum Angle (either side) - LGP |
- |
- |
- |
25° |
Overall Length - With Blade - LGP |
- |
- |
- |
167.8 in |
BLADE: Blade Width at Maximum Angle - Standard |
- |
- |
- |
95.2 in |
BLADE: Digging Depth - Standard |
- |
- |
- |
23.2 in |
BLADE: Blade Width - Standard |
- |
- |
- |
104.2 in |
BLADE: Blade Lift Height - Standard |
- |
- |
- |
28.7 in |
Ground Clearance - Standard |
- |
- |
- |
13 in |
BLADE: Blade Cutting Edge Angle, Adjustable - Standard |
- |
- |
- |
52° to 58° |
BLADE: Maximum Angle (either side) - Standard |
- |
- |
- |
25° |
BLADE: Maximum Tilt - Standard |
- |
- |
- |
14.5 in |
BLADE: Blade Capacity (SAE) - Standard |
- |
- |
- |
1.99 yd³ |
Track Gauge - Standard |
- |
- |
- |
58.9 in |
BLADE: Blade Height - Standard |
- |
- |
- |
35.8 in |
Overall Length - With Blade - Standard |
- |
- |
- |
168 in |
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) |
- |
- |
- |
129.6 in |
Width of Dozer (standard shoes, no blade) - Standard |
- |
- |
- |
74.8 in |
Length of Basic Dozer (without blade) - Standard |
- |
- |
- |
129.6 in |
Length of Basic Dozer (without blade) - LGP |
- |
- |
- |
129.6 in |
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) |
- |
- |
- |
94.9 in |
Dozer Height - LGP |
- |
- |
- |
108.9 in |
Width of Dozer (standard shoes, no blade) - LGP |
- |
- |
- |
92.9 in |
Dozer Height - LGP, 762 mm (30 in) |
- |
- |
- |
108.9 in |
Dozer Height - Standard |
- |
- |
- |
108.9 in |
High Performance Winch |
Weight |
- |
- |
- |
1345 lb |
Drum diameter |
- |
- |
- |
10 in |
Winch drive |
- |
- |
- |
Hydrostatic |
Winch length |
- |
- |
- |
27.76 in |
Maximum line pull – bare drum |
- |
- |
- |
40000 lb |
Maximum line speed – full drum |
- |
- |
- |
207 ft/min |
Drum width |
- |
- |
- |
10.8 in |
Drum capacity – optional |
- |
- |
- |
256 ft |
Rope diameter – recommended |
- |
- |
- |
0.63 in |
Maximum line pull – full drum |
- |
- |
- |
25000 lb |
Rope diameter – optional |
- |
- |
- |
0.75 in |
Speed |
- |
- |
- |
Variable |
Maximum line speed – bare drum |
- |
- |
- |
131 ft/min |
Throat clearance |
- |
- |
- |
6.75 in |
Drum capacity – recommended cable |
- |
- |
- |
371 ft |
Overall width |
- |
- |
- |
29.2 in |
Control |
- |
- |
- |
Hydraulic |
Retrieval Winch |
Drum Diameter |
- |
- |
- |
8 in |
Drum Width |
- |
- |
- |
9.65 in |
Throat Clearance |
- |
- |
- |
5.6 in |
Winch Length |
- |
- |
- |
35.63 in |
Overall width |
- |
- |
- |
27.91 in |
Weight |
- |
- |
- |
1747 lb |
Maximum Line Pull - Full Drum |
- |
- |
- |
79 ft/min |
Drum Capacity - Recommended Cable |
- |
- |
- |
277 ft |
Maximum Line Pull - Bare Drum |
- |
- |
- |
50 ft/min |
Drum Capacity - Optional Cable |
- |
- |
- |
195 ft |
Maximum Line Speed - Full Drum |
- |
- |
- |
20350 lb |
Control |
- |
- |
- |
Hydraulic |
Maximum Line Speed - Bare Drum |
- |
- |
- |
32150 lb |
Rope Diameter - Optional |
- |
- |
- |
0.75 in |
Winch Drive |
- |
- |
- |
Hydraulic |
Rope Diameter - Recommended |
- |
- |
- |
0.63 in |
Speed |
- |
- |
- |
Variable |