CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D7 Dozer
    View Product
    D11 Dozer
    View Product Remove
    814 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B - -
    Power - Net 265 HP - -
    Net Power - Rated - ISO 9249/SAE J1349 265 HP - -
    Net Power (Rated) - ISO 9249 (DIN) 268 mhp - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV - -
    Note (1) Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t - -
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - -
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - -
    Note (4) Machine Build Number 17A - -

    Weights
    Operating Weight 65644 lb 229800 lb -
    Note (1) Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. -
    Operating Weight - Carrydozer - 250665 lb -
    Note (2) - D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. -

    Transmission
    Power Train Fully Automatic 4-Speed - -
    1.0 Forward - 2.5 mile/h -
    2.0 Forward - 4.4 mile/h -
    3.0 Forward - 7.6 mile/h -
    1.0 Reverse - 3 mile/h -
    2.0 Reverse - 5.3 mile/h -
    3.0 Reverse - 9.1 mile/h -
    Drawbar Pull - 3 Forward - 46250 ft·lbf -
    Drawbar Pull - 1 Forward - 148200 ft·lbf -
    Drawbar Pull - 2 Forward - 82300 ft·lbf -
    Transmission Type - - Cat Planetary Power Shift
    Forward - 1 - - 3.7 mile/h
    Forward - 2 - - 6.5 mile/h
    Forward - 3 - - 11.2 mile/h
    Forward - 4 - - 19.4 mile/h
    Reverse - 1 - - 4.2 mile/h
    Reverse - 2 - - 7.3 mile/h
    Reverse - 3 - - 12.8 mile/h
    Reverse - 4 - - 22.1 mile/h

    Service Refill Capacities
    Fuel Tank 123 gal (US) - 132.1 gal (US)
    DEF Tank 12 gal (US) - -
    Cooling System - 46.8 gal (US) -
    Cooling System Refill - Tier 2 Equivalent Engine - 41.7 gal (US) -
    Engine Crankcase - 35.1 gal (US) 5.3 gal (US)
    Power Train - 120 gal (US) -
    Power Train - Refill Volume - 103.3 gal (US) -
    Final Drive - Each - 12.4 gal (US) -
    Roller Frames - Each - 24.8 gal (US) -
    Hydraulic Tank - 42.2 gal (US) -
    Hydraulic System Tank and Chassis - 64.7 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Standard) - 117.6 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - 143.4 gal (US) -
    Diesel Exhaust Fluid Tank - - 4.2 gal (US)
    Cooling Systems - Tier 4 Final/EU Stage V - - 21.4 gal (US)
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - - 19.3 gal (US)
    Transmission - - 13.2 gal (US)
    Differential - Final Drives - Front - - 17.2 gal (US)
    Differential - Final Drives - Rear - - 17.2 gal (US)
    Hydraulic System - Implement/Steering - - 34.1 gal (US)
    Hydraulic Tank Only - - 19.8 gal (US)

    Standard SU
    Operating Weight 65644 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Semi-Universal (SU) - -
    Blade Capacity 10 yd³ - -

    LGP S
    Operating Weight 63220 lb - -
    Ground Pressure 6 psi - -
    Width of Standard Shoe 36 in - -
    Blade Straight (S) - -
    Blade Capacity 8 yd³ - -

    Waste Handler
    Operating Weight 62035 lb - -
    Ground Pressure 10 psi - -
    Width of Standard Shoe 24 in - -
    Blade Universal Landfill (U) - -
    Blade Capacity 22 yd³ - -

    Sustainability
    Recyclability 98% - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. - -
    Note (1) - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) -

    Note (2) Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C32 -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 955 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Blades
    Semi-Universal (SU)* Capacity - 35.6 yd³ -
    Semi-Universal (SU)* Width Over Endbits - 219.8 in -
    U-Blade Capacity - 45 yd³ -
    U-Blade Width - 249.6 in -
    Reclamation Universal - Blade capacity (SAE J1265) - 55 yd³ -
    Reclamation Universal - Width with blade (over end bits) - 251.8 in -
    Carry Dozer - Blade capacity (SAE J1265) - 57 yd³ -
    Carry Dozer - Width with blade (over end bits) - 263.9 in -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C32 -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 957 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - 500 gal (US) -
    Fuel Tank - Usable Volume - 475 gal (US) -

    Hydraulic Controls
    Pump Type - Variable displacement piston pump -
    Combined Pump Output - Implement - 177 gal/min -

    Undercarriage
    Shoe Type - Extreme Service -
    Width - Shoe - 28 in -
    Width - Shoe - CD - 36 in -
    Shoes/Side - 41 -
    Grouser Height - 4 in -
    Pitch - 12.5 in -
    Ground Clearance* - 30.6 in -
    Track Gauge - 114 in -
    Length - Track on Ground - 175 in -
    Ground Contact Area - 9781 in² -
    Ground Contact Area - CD - 12605 in² -
    Track Rollers/Side - 8 -
    Number of Carrier Rollers - 1 per side (optional) -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 66000 lb -
    Maximum penetration depth (standard tip) - 63.5 in -
    Pryout Force - 148510 lb -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 66110 lb -
    Maximum penetration depth (standard tip) - 85.5 in -
    Pryout Force - 148510 lb -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - 131.1 in -
    Maximum Penetration Force - Shank Vertical - 77350 lb -
    Maximum Penetration - Standard Tip - 43.3 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 145640 lb -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - 149.8 in -
    Length with SU-Blade** - No rear attachment - 345.1 in -
    Overall Length SU-Blade and SS Ripper** - 421.7 in -

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 -
    FOPS - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II -
    Sound (1) - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). -
    Sound (2) - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). -

    Dimensions - D11
    Ground Clearance* - 31.4 in -
    Track Gauge - 114 in -
    Width at Outside of Track (710 mm Track Shoe) - 142 in -
    Height (ROPS/canopy)* - 185.9 in -
    Length of Track on Ground - 175 in -
    Length with SU-Blade** - No rear attachment - 337.8 in -
    Overall Length SU-Blade and SS Ripper** - 414.4 in -
    Note - *Includes grouser height for total dimensions on hard surfaces. -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - - Cat C7.1
    Net Power (SAE J1349:2011) - - 249 HP
    Net Power (ISO 9249:2007) - - 249 HP
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V
    Rated Speed - - 2200 r/min
    Gross Power (SAE J1995:2014) - - 284 HP
    Engine Power (ISO 14396:2002) - - 275 HP
    Peak Torque - 1,400 rpm - - 902 lb/ft
    Torque Rise - - 52%
    Bore - - 4.1 in
    Stroke - - 5.3 in
    Displacement - - 427.8 in³
    High Idle Speed - - 2270 r/min
    Low Idle Speed - - 800 r/min
    Maximum Altitude without Derating - - 9842.5 ft
    Note - - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - - 48526 lb

    Scoops
    Chip Scoop Doze Capacity - - 37.9 yd³
    Chip Scoop Carry Capacity - - 19 yd³

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - - Cat C7.1
    Emissions - - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
    Rated Speed - - 2200 r/min
    Net Power (SAE J1349:2011) - - 249 HP
    Gross Power (SAE J1995:2014) - - 286 HP
    Engine Power (ISO 14396:2002) - - 275 HP
    Peak Torque - 1,400 rpm - - 749 lb/ft
    Torque Rise - - 26%
    Bore - - 4.1 in
    Stroke - - 5.3 in
    Displacement - - 427.8 in³
    High Idle Speed - - 2270 r/min

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - - 47887 lb

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - - 52280 lb

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - - 51639 lb

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - - Pilot operated LS valve with EH
    Lift/Tilt System - - Variable displacement piston
    Maximum Flow at 2,200 rpm - - 23.5 gal/min
    Relief Valve Setting - Lift/Tilt - - 3190 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - - 120 mm × 915 mm (4.7 in × 36.0 in)
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - - 101.6 mm × 234 mm (4.0 in × 9.2 in)
    Pilot System - - Open center, fixed displacement gear
    Pilot Relief Valve Setting - - 3046 psi

    Hydraulic System - Steering
    Steering System - Circuit - - Pilot, load sensing
    Steering System - Pump - - Variable displacement piston
    Maximum Flow at 2,200 rpm - - 38.8 gal/min
    Relief Valve Setting - Steering - - 4003 psi
    Total Steering Angle - - 72°
    Steering Cycle Times - High Idle - - 3 s
    Steering Cycle Times - Low Idle - - 8.2 s

    Axles
    Front - - Planetary – Fixed
    Rear - - Planetary – Oscillating
    Oscillation Angle - - ±10°

    Braking System
    Service Brakes - - Single Disc Wet (enclosed) 4 WHL
    Parking Brake - - Drum and Shoe, Spring Applied, Hydraulic Released

    Dimensions (Approximate)
    Height to Top of Beacon - - 13.1 ft
    Height - Top of Cab - - 12.1 ft
    Height - Top of Exhaust Pipe - - 11.3 ft
    Height - Top of Hood - - 8.7 ft
    Height to Top of Radiator Guard - - 8 ft
    Ground Clearance to Hitch - - 1.4 ft
    Ground Clearance to Transmission Guard - - 1.4 ft
    Ground Clearance to Bottom of Bumper - - 2.3 ft
    Centerline of Rear Axle to Bumper - - 6.5 ft
    Centerline of Front Axle to Hitch - - 5.5 ft
    Wheel Base - - 11 ft
    Width over Platform - - 10.3 ft
    Overall Length to Front Tire - - 21 ft
    Overall Machine Length with Straight Blade - - 23.6 ft
    Overall Machine Length with Coal Blade - - 25.5 ft

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 111 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A)

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 109 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 112 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - 110 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A).
    Add a Similar Product: