D1 Dozer

D1 Dozer

360° View

Video

Product description

The Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Engine

Engine Model - Cat C3.6
Power - Net - 80HP
Displacement - 220in³
Net Power - 2,200 rpm - SAE J1349 - 80HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - 80HP
Note (1) - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2) - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Weights

Operating Weight - 17855lb

Weights

Operating Weight - LGP - 18839lb
Note (1) - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in - 19295lb
Note (2) - For machine with ripper, add 554 kg (1,222 lb).

Transmission

Drive Pumps - 1
Maximum Travel Speed - Reverse - 6.2mile/h
Relief Valve Settings - 7033psi
Maximum Travel Speed - Forward - 5.6mile/h
Track Motors - 2

Hydraulic Controls

Pump Output - 17.2gal/min
Relief Valve Settings - 2988psi

Ripper

Type - Parallelogram
Number of Shanks - 3
Height - 6.5in
Weight - 1222lb
Maximum Ground Clearance Under Tip - 17.6in
Maximum Digging Depth - 13.3in
Overall Width - 67.3in
Maximum Reach - Ground Line - 30.2in

Engine

Power Train - Hydrostatic

Cab

FOPS - ISO 3449:2005 Level II
ROPS - ISO 3471:2008

Undercarriage

Length - Track on Ground - LGP, 762 mm (30 in) - 89in
Length - Track on Ground - LGP - 89in
Track Gauge - LGP - 68in
Shoe Width - LGP, 762 mm (30 in) - 30in
Track Gauge - LGP, 762 mm (30 in) - 73in
Shoe Width - LGP - 25in
Track Gauge - 59in
Shoe Width - Standard - 16in
Ground Pressure - LGP - 4.3psi
Ground Pressure - LGP, 762 mm (30 in) - 3.7psi
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - 43
Number of Rollers - Each Side - 6

Undercarriage

Length of Track on Ground - 89in
Number of Shoes - Each Side - Abrasion Undercarriage - 38
Ground Pressure - 6.45psi

Service Refill Capacities

Final Drive - Each - LGP - 2.6gal (US)
Cooling System - 4.2gal (US)
Diesel Exhaust Fluid (DEF) Tank - 4.9gal (US)
Transmission - Hydraulic Tank - 23.8gal (US)
Crankcase - With Filter - 2.8gal (US)
Fuel Tank - 51.5gal (US)

Service Refill Capacities

Final Drives - Each Side - 2.6gal (US)

Air Conditioning System

Air Conditioning - The air conditioning system on this machine contains the ﬂuorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions

BLADE: Blade Capacity (SAE) - LGP - 2.17yd³
BLADE: Blade Lift Height - LGP - 28.7in
BLADE: Maximum Tilt - LGP - 17.2in
BLADE: Blade Width - LGP - 124in
Ground Clearance - LGP - 13in
BLADE: Blade Width at Maximum Angle - LGP - 113.1in
BLADE: Digging Depth - LGP - 23in
Track Gauge - LGP - 67.9in
Ground Clearance - LGP, 762 mm (30 in) - 13in
BLADE: Blade Height - LGP - 33.8in
Overall Length - With Blade - LGP, 762 mm (30 in) - 167.8in
Track Gauge - LGP, 762 mm (30 in) - 73in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP - 52° to 58°
BLADE: Maximum Angle (either side) - LGP - 25°
Overall Length - With Blade - LGP - 167.8in
Note - *Abrasion Undercarriage
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - 129.6in
Width of Dozer (standard shoes, no blade) - Standard - 74.8in
Length of Basic Dozer (without blade) - Standard - 129.6in
Length of Basic Dozer (without blade) - LGP - 129.6in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - 94.9in
Dozer Height - LGP - 108.9in
Width of Dozer (standard shoes, no blade) - LGP - 92.9in
Dozer Height - LGP, 762 mm (30 in) - 108.9in
Dozer Height - Standard - 108.9in

Dimensions

Note - With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
BLADE: Blade Width at Maximum Angle - Standard - 95.2in
BLADE: Digging Depth - Standard - 23.2in
BLADE: Blade Width - Standard - 104.2in
BLADE: Blade Lift Height - Standard - 28.7in
Ground Clearance - Standard - 13in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard - 52° to 58°
BLADE: Maximum Angle (either side) - Standard - 25°
BLADE: Maximum Tilt - Standard - 14.5in
BLADE: Blade Capacity (SAE) - Standard - 1.99yd³
Track Gauge - Standard - 58.9in
BLADE: Blade Height - Standard - 35.8in
Overall Length - With Blade - Standard - 168in

High Performance Winch

Weight - 1345lb
Drum diameter - 10in
Winch drive - Hydrostatic
Winch length - 27.76in
Maximum line pull – bare drum - 40000lb
Maximum line speed – full drum - 207ft/min
Drum width - 10.8in
Drum capacity – optional - 256ft
Rope diameter – recommended - 0.63in
Maximum line pull – full drum - 25000lb
Rope diameter – optional - 0.75in
Speed - Variable
Maximum line speed – bare drum - 131ft/min
Throat clearance - 6.75in
Drum capacity – recommended cable - 371ft
Overall width - 29.2in
Control - Hydraulic

Retrieval Winch

Drum Diameter - 8in
Drum Width - 9.65in
Throat Clearance - 5.6in
Winch Length - 35.63in
Overall width - 27.91in
Weight - 1747lb
Maximum Line Pull - Full Drum - 79ft/min
Drum Capacity - Recommended Cable - 277ft
Maximum Line Pull - Bare Drum - 50ft/min
Drum Capacity - Optional Cable - 195ft
Maximum Line Speed - Full Drum - 20350lb
Control - Hydraulic
Maximum Line Speed - Bare Drum - 32150lb
Rope Diameter - Optional - 0.75in
Winch Drive - Hydraulic
Rope Diameter - Recommended - 0.63in
Speed - Variable

Standard Equipment:

Power Train
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat^® C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
Electrical
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
Undercarriage
- SALT undercarriage (43 section)
- Carrier rollers
- Guards, front/rear guiding
- Six roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
Hydraulic
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
Cat Technology
- Low Slip Traction Control (included with ARO and Cat Grade 3D)
- Slope Indicate
- Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
- Compatibility with radios and base stations from Trimble, Topcon, and Leica
- Capability to install 3D grade systems from Trimble, Topcon, and Leica
Attachments
- Rigid drawbar
- Front pull device
Operator Environment
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
  – Chassis slope indication
  – Diesel exhaust fluid (DEF)
  – Engine coolant temperature
  – Fuel level
  – Hydraulic oil temperature
- Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic

Optional Equipment:

Power Train
- Air cleaner with external precleaner
- Installation, winch
Electrical
- Four integrated front LED lights, two rear LED
Undercarriage
- Abrasion undercarriage (38 section)
- Track Pairs:
  – Track, 406 mm (16 in)
  – Track, 635 mm (25 in)
  – Track, 762 mm (30 in)
Hydraulic
- Four valve for use with ripper
- Four valve for use with winch
Cat Technology
- Cat Grade with Slope Assist
- Cat Grade with 3D
- Blade Load Monitor (included with Cat Grade 3D)
- AutoCarry (included with Cat Grade 3D)
- Cat Product Link^™ PLE643/PLE743 Cellular
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Full-color 10 in (254 mm) touchscreen grade display
- Cat Command Console
- Cat Command Station
Attachments
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three
- shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
Operator Environment
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth^®
- Seat, air suspension, choice of:
  – Vinyl, heated seat with heated controls
  – Cloth, heated seat with heated controls
  – Cloth, heated and ventilated seat with heated controls
- Sound suppression
Other
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether