CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D1 Dozer
    View Product
    834 Wheel Dozer
    View Product Remove
    D6 Dozer
    View Product Remove

    Engine
    Engine Model Cat C3.6 Cat® C18 Cat C9.3B
    Power - Net 80 HP - 215 HP
    Displacement 220 in³ 1105 in³ -
    Net Power - 2,200 rpm - SAE J1349 80 HP - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80 HP - -
    Power Train Hydrostatic - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. - Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
    Rated Speed - 1900 r/min -
    Peak Power Speed - 1500 r/min -
    Gross Power - SAE J1995 - 562 HP -
    Net Power - SAE J1349 - 496 HP -
    Bore - 5.7 in -
    Stroke - 7.2 in -
    Peak Torque - 1,300 rpm - 2092 lb/ft -
    Torque Rise - 52 % -
    Emissions - U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V
    Net Power - Rated - ISO 9249/SAE J1349 - - 215 HP
    Net Power (Rated) - ISO 9249 (DIN) - - 219 mhp
    Note (3) - - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
    Note (4) - - Machine Build Number 20B

    Weights
    Operating Weight 17855 lb - 50733 lb
    Operating Weight - LGP 18839 lb - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - -
    Operating Weight - LGP, 762 mm/30 in 19295 lb - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - -

    Transmission
    Drive Pumps 1 - -
    Maximum Travel Speed - Reverse 6.2 mile/h - -
    Relief Valve Settings 7033 psi - -
    Maximum Travel Speed - Forward 5.6 mile/h - -
    Track Motors 2 - -
    Transmission Type - Cat planetary power shift -
    Forward - 1 - 4.2 mile/h -
    Forward - 2 - 7.2 mile/h -
    Forward - 3 - 12.6 mile/h -
    Forward - 4 - 22 mile/h -
    Reverse - 1 - 4.2 mile/h -
    Reverse - 2 - 7.6 mile/h -
    Reverse - 3 - 13.3 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 7.7 mile/h -
    Direct Drive - Forward 3 - 13.7 mile/h -
    Direct Drive - Forward 4 - 23.9 mile/h -
    Direct Drive - Reverse 1 - 4.5 mile/h -
    Direct Drive - Reverse 2 - 8.1 mile/h -
    Direct Drive - Reverse 3 - 14.3 mile/h -
    Power Train - - Fully Automatic 4-Speed Powershift

    Hydraulic Controls
    Pump Output 17.2 gal/min - -
    Relief Valve Settings 2988 psi - -

    Ripper
    Type Parallelogram - -
    Number of Shanks 3 - -
    Height 6.5 in - -
    Weight 1222 lb - -
    Maximum Ground Clearance Under Tip 17.6 in - -
    Maximum Digging Depth 13.3 in - -
    Overall Width 67.3 in - -
    Maximum Reach - Ground Line 30.2 in - -

    Cab
    FOPS ISO 3449:2005 Level II - -
    ROPS ISO 3471:2008 - -

    Undercarriage
    Length - Track on Ground - LGP, 762 mm (30 in) 89 in - -
    Length - Track on Ground - LGP 89 in - -
    Track Gauge - LGP 68 in - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    Shoe Width - LGP 25 in - -
    Track Gauge 59 in - -
    Shoe Width - Standard 16 in - -
    Ground Pressure - LGP 4.3 psi - -
    Ground Pressure - LGP, 762 mm (30 in) 3.7 psi - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43 - -
    Number of Rollers - Each Side 6 - -
    Length of Track on Ground 89 in - -
    Number of Shoes - Each Side - Abrasion Undercarriage 38 - -
    Ground Pressure 6.45 psi - -

    Service Refill Capacities
    Final Drive - Each - LGP 2.6 gal (US) - -
    Cooling System 4.2 gal (US) 31.7 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - -
    Transmission - Hydraulic Tank 23.8 gal (US) - -
    Crankcase - With Filter 2.8 gal (US) - -
    Fuel Tank 51.5 gal (US) 209.5 gal (US) 90 gal (US)
    Final Drives - Each Side 2.6 gal (US) - -
    Crankcase - 15.9 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) -
    Transmission - 31.7 gal (US) -
    Hydraulic System Factory Fill - 63.4 gal (US) -
    Differential - Final Drives - Front - 49.1 gal (US) -
    Differential - Final Drives - Rear - 49.1 gal (US) -
    Hydraulic System - Tank Only - 37 gal (US) -
    DEF Tank - - 7.4 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.

    Dimensions
    BLADE: Blade Capacity (SAE) - LGP 2.17 yd³ - -
    BLADE: Blade Lift Height - LGP 28.7 in - -
    BLADE: Maximum Tilt - LGP 17.2 in - -
    BLADE: Blade Width - LGP 124 in - -
    Ground Clearance - LGP 13 in - -
    BLADE: Blade Width at Maximum Angle - LGP 113.1 in - -
    BLADE: Digging Depth - LGP 23 in - -
    Track Gauge - LGP 67.9 in - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - -
    BLADE: Blade Height - LGP 33.8 in - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 167.8 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - -
    Note *Abrasion Undercarriage - -
    BLADE: Maximum Angle (either side) - LGP 25° - -
    Overall Length - With Blade - LGP 167.8 in - -
    BLADE: Blade Width at Maximum Angle - Standard 95.2 in - -
    BLADE: Digging Depth - Standard 23.2 in - -
    BLADE: Blade Width - Standard 104.2 in - -
    BLADE: Blade Lift Height - Standard 28.7 in - -
    Ground Clearance - Standard 13 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58° - -
    BLADE: Maximum Angle (either side) - Standard 25° - -
    BLADE: Maximum Tilt - Standard 14.5 in - -
    BLADE: Blade Capacity (SAE) - Standard 1.99 yd³ - -
    Track Gauge - Standard 58.9 in - -
    BLADE: Blade Height - Standard 35.8 in - -
    Overall Length - With Blade - Standard 168 in - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 129.6 in - -
    Width of Dozer (standard shoes, no blade) - Standard 74.8 in - -
    Length of Basic Dozer (without blade) - Standard 129.6 in - -
    Length of Basic Dozer (without blade) - LGP 129.6 in - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 94.9 in - -
    Dozer Height - LGP 108.9 in - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - -
    Dozer Height - LGP, 762 mm (30 in) 108.9 in - -
    Dozer Height - Standard 108.9 in - -
    Height - Top of Exhaust Stack - 15.9 ft -
    Height - Top of Air Cleaner - 12.8 ft -
    Height - Top of Hood - 10.9 ft -
    Ground Clearance - Bumper - 3.1 ft -
    Centerline of Rear Axle to Edge of Bumper - 10.5 ft -
    Wheel Base - 14.9 ft -
    Length - Front of Tire - 28.4 ft -
    Length - Straight Blade on Ground - 32.6 ft -
    Centerline of Front Axle to Hitch - 7.5 ft -
    Length - Universal Blade on Ground - 34.4 ft -
    Ground Clearance - 1.7 ft -
    Height - Top of Cab - 13.7 ft -

    High Performance Winch
    Weight 1345 lb - -
    Drum diameter 10 in - -
    Winch drive Hydrostatic - -
    Winch length 27.76 in - -
    Maximum line pull – bare drum 40000 lb - -
    Maximum line speed – full drum 207 ft/min - -
    Drum width 10.8 in - -
    Drum capacity – optional 256 ft - -
    Rope diameter – recommended 0.63 in - -
    Maximum line pull – full drum 25000 lb - -
    Rope diameter – optional 0.75 in - -
    Speed Variable - -
    Maximum line speed – bare drum 131 ft/min - -
    Throat clearance 6.75 in - -
    Drum capacity – recommended cable 371 ft - -
    Overall width 29.2 in - -
    Control Hydraulic - -

    Retrieval Winch
    Drum Diameter 8 in - -
    Drum Width 9.65 in - -
    Throat Clearance 5.6 in - -
    Winch Length 35.63 in - -
    Overall width 27.91 in - -
    Weight 1747 lb - -
    Maximum Line Pull - Full Drum 79 ft/min - -
    Drum Capacity - Recommended Cable 277 ft - -
    Maximum Line Pull - Bare Drum 50 ft/min - -
    Drum Capacity - Optional Cable 195 ft - -
    Maximum Line Speed - Full Drum 20350 lb - -
    Control Hydraulic - -
    Maximum Line Speed - Bare Drum 32150 lb - -
    Rope Diameter - Optional 0.75 in - -
    Winch Drive Hydraulic - -
    Rope Diameter - Recommended 0.63 in - -
    Speed Variable - -

    Operating Specifications
    Operating Weight - 105271 lb -
    Blade Capacities - 7.9 – 22.2 m3 (10.3 – 29.0 yd3) -
    Coal Scoop Operating Weight - 112428 lb -
    Chip Scoop Operating Weight - 112838 lb -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH -
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 1,900 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4641 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 139.75 mm × 1021 mm (5.5 in × 40.2 in) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 140 mm × 230 mm (5.5 in × 9.1 in) -
    Pilot System - Variable displacement piston -
    Pilot Maximum Flow - 13.7 gal/min -
    Pilot Relief Valve Setting - 580 psi -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing -
    Steering System - Pump - Piston, variable displacement -
    Maximum Flow - 65.8 gal/min -
    Relief Valve Setting - Steering - 3495 psi -
    Total Steering Angle - 86 ° -
    Steering Cycle Times - High Idle - 3.1 s -
    Steering Cycle Times - Low Idle - 5.7 s -

    Axles
    Front - Fixed -
    Rear - Trunnion -
    Oscillation Angle - ±13° -

    Brakes
    Brakes - ISO 3450: 2011 -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 113 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 109 dB(A) -

    Scoops
    Chip Scoop Carry Capacity - 35 yd³ -
    Chip Scoop Doze Capacity - 70 yd³ -
    Coal Scoop Carry Capacity - 30 yd³ -
    Coal Scoop Doze Capacity - 60 yd³ -

    D6 Push Arm
    Operating Weight - - 48788 lb
    Ground Pressure - - 7.9 psi
    Width of Standard Shoe - - 24 in
    Blade - - Semi-Universal (SU)
    Blade Capacity - - 7.5 yd³

    D6 LGP (30-in) Push Arm
    Operating Weight - - 50420 lb
    Ground Pressure - - 6.5 psi
    Width of Standard Shoe - - 30 in
    Blade - - Semi-Universal (SU)
    Blade Capacity - - 7.6 yd³

    D6 LGP (36-in) Push Arm
    Operating Weight - - 52715 lb
    Ground Pressure - - 5.2 psi
    Width of Standard Shoe - - 36 in
    Blade - - Straight
    Blade Capacity - - 5 yd³

    D6 VPAT
    Operating Weight - - 49108 lb
    Ground Pressure - - 7.1 psi
    Width of Standard Shoe - - 24 in
    Blade - - VPAT
    Blade Capacity - - 5.4 yd³

    D6 LGP (30-in) VPAT
    Operating Weight - - 50733 lb
    Ground Pressure - - 5.9 psi
    Width of Standard Shoe - - 30 in
    Blade - - VPAT
    Blade Capacity - - 5.9 yd³

    D6 LGP (36-in) VPAT
    Operating Weight - - 51912 lb
    Ground Pressure - - 5 psi
    Width of Standard Shoe - - 36 in
    Blade - - VPAT
    Blade Capacity - - 6.5 yd³

    Sustainability
    Recyclability - - 98%
    Add a Similar Product: