Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
-
-
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
-
-
Rated Speed
-
1900 r/min
-
Peak Power Speed
-
1500 r/min
-
Gross Power - SAE J1995
-
562 HP
-
Net Power - SAE J1349
-
496 HP
-
Bore
-
5.7 in
-
Stroke
-
7.2 in
-
Peak Torque - 1,300 rpm
-
2092 lb/ft
-
Torque Rise
-
52 %
-
Emissions
-
U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2.
-
Weights
Operating Weight
17855 lb
-
-
Operating Weight - LGP
18839 lb
-
-
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
-
-
Operating Weight - LGP, 762 mm/30 in
19295 lb
-
-
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
-
-
Transmission
Drive Pumps
1
-
-
Maximum Travel Speed - Reverse
6.2 mile/h
-
-
Relief Valve Settings
7033 psi
-
-
Maximum Travel Speed - Forward
5.6 mile/h
-
-
Track Motors
2
-
-
Transmission Type
-
Cat planetary power shift
-
Forward - 1
-
4.2 mile/h
-
Forward - 2
-
7.2 mile/h
-
Forward - 3
-
12.6 mile/h
-
Forward - 4
-
22 mile/h
-
Reverse - 1
-
4.2 mile/h
-
Reverse - 2
-
7.6 mile/h
-
Reverse - 3
-
13.3 mile/h
-
Direct Drive - Forward 1
-
Lock-up disabled
-
Direct Drive - Forward 2
-
7.7 mile/h
-
Direct Drive - Forward 3
-
13.7 mile/h
-
Direct Drive - Forward 4
-
23.9 mile/h
-
Direct Drive - Reverse 1
-
4.5 mile/h
-
Direct Drive - Reverse 2
-
8.1 mile/h
-
Direct Drive - Reverse 3
-
14.3 mile/h
-
Hydraulic Controls
Pump Output
17.2 gal/min
-
-
Relief Valve Settings
2988 psi
-
-
Ripper
Type
Parallelogram
-
-
Number of Shanks
3
-
-
Height
6.5 in
-
-
Weight
1222 lb
-
-
Maximum Ground Clearance Under Tip
17.6 in
-
-
Maximum Digging Depth
13.3 in
-
-
Overall Width
67.3 in
-
-
Maximum Reach - Ground Line
30.2 in
-
-
Cab
FOPS
ISO 3449:2005 Level II
-
-
ROPS
ISO 3471:2008
-
-
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in)
89 in
-
-
Length - Track on Ground - LGP
89 in
-
-
Track Gauge - LGP
68 in
-
-
Shoe Width - LGP, 762 mm (30 in)
30 in
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
Shoe Width - LGP
25 in
-
-
Track Gauge
59 in
-
-
Shoe Width - Standard
16 in
-
-
Ground Pressure - LGP
4.3 psi
-
-
Ground Pressure - LGP, 762 mm (30 in)
3.7 psi
-
-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
-
-
Number of Rollers - Each Side
6
-
-
Length of Track on Ground
89 in
-
-
Number of Shoes - Each Side - Abrasion Undercarriage
38
-
-
Ground Pressure
6.45 psi
-
-
Service Refill Capacities
Final Drive - Each - LGP
2.6 gal (US)
-
-
Cooling System
4.2 gal (US)
31.7 gal (US)
-
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
-
-
Transmission - Hydraulic Tank
23.8 gal (US)
-
-
Crankcase - With Filter
2.8 gal (US)
-
-
Fuel Tank
51.5 gal (US)
209.5 gal (US)
-
Final Drives - Each Side
2.6 gal (US)
-
-
Crankcase
-
15.9 gal (US)
-
Diesel Exhaust Fluid Tank
-
8.7 gal (US)
-
Transmission
-
31.7 gal (US)
-
Hydraulic System Factory Fill
-
63.4 gal (US)
-
Differential - Final Drives - Front
-
49.1 gal (US)
-
Differential - Final Drives - Rear
-
49.1 gal (US)
-
Hydraulic System - Tank Only
-
37 gal (US)
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Dimensions
BLADE: Blade Capacity (SAE) - LGP
2.17 yd³
-
-
BLADE: Blade Lift Height - LGP
28.7 in
-
-
BLADE: Maximum Tilt - LGP
17.2 in
-
-
BLADE: Blade Width - LGP
124 in
-
-
Ground Clearance - LGP
13 in
-
-
BLADE: Blade Width at Maximum Angle - LGP
113.1 in
-
-
BLADE: Digging Depth - LGP
23 in
-
-
Track Gauge - LGP
67.9 in
-
-
Ground Clearance - LGP, 762 mm (30 in)
13 in
-
-
BLADE: Blade Height - LGP
33.8 in
-
-
Overall Length - With Blade - LGP, 762 mm (30 in)
167.8 in
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
-
-
Note
*Abrasion Undercarriage
-
-
BLADE: Maximum Angle (either side) - LGP
25°
-
-
Overall Length - With Blade - LGP
167.8 in
-
-
BLADE: Blade Width at Maximum Angle - Standard
95.2 in
-
-
BLADE: Digging Depth - Standard
23.2 in
-
-
BLADE: Blade Width - Standard
104.2 in
-
-
BLADE: Blade Lift Height - Standard
28.7 in
-
-
Ground Clearance - Standard
13 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
-
-
BLADE: Maximum Angle (either side) - Standard
25°
-
-
BLADE: Maximum Tilt - Standard
14.5 in
-
-
BLADE: Blade Capacity (SAE) - Standard
1.99 yd³
-
-
Track Gauge - Standard
58.9 in
-
-
BLADE: Blade Height - Standard
35.8 in
-
-
Overall Length - With Blade - Standard
168 in
-
-
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129.6 in
-
-
Width of Dozer (standard shoes, no blade) - Standard
74.8 in
-
-
Length of Basic Dozer (without blade) - Standard
129.6 in
-
-
Length of Basic Dozer (without blade) - LGP
129.6 in
-
-
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
94.9 in
-
-
Dozer Height - LGP
108.9 in
-
-
Width of Dozer (standard shoes, no blade) - LGP
92.9 in
-
-
Dozer Height - LGP, 762 mm (30 in)
108.9 in
-
-
Dozer Height - Standard
108.9 in
-
-
Height - Top of Exhaust Stack
-
15.9 ft
-
Height - Top of Air Cleaner
-
12.8 ft
-
Height - Top of Hood
-
10.9 ft
-
Ground Clearance - Bumper
-
3.1 ft
-
Centerline of Rear Axle to Edge of Bumper
-
10.5 ft
-
Wheel Base
-
14.9 ft
-
Length - Front of Tire
-
28.4 ft
-
Length - Straight Blade on Ground
-
32.6 ft
-
Centerline of Front Axle to Hitch
-
7.5 ft
-
Length - Universal Blade on Ground
-
34.4 ft
-
Ground Clearance
-
1.7 ft
-
Height - Top of Cab
-
13.7 ft
-
High Performance Winch
Weight
1345 lb
-
-
Drum diameter
10 in
-
-
Winch drive
Hydrostatic
-
-
Winch length
27.76 in
-
-
Maximum line pull – bare drum
40000 lb
-
-
Maximum line speed – full drum
207 ft/min
-
-
Drum width
10.8 in
-
-
Drum capacity – optional
256 ft
-
-
Rope diameter – recommended
0.63 in
-
-
Maximum line pull – full drum
25000 lb
-
-
Rope diameter – optional
0.75 in
-
-
Speed
Variable
-
-
Maximum line speed – bare drum
131 ft/min
-
-
Throat clearance
6.75 in
-
-
Drum capacity – recommended cable
371 ft
-
-
Overall width
29.2 in
-
-
Control
Hydraulic
-
-
Retrieval Winch
Drum Diameter
8 in
-
-
Drum Width
9.65 in
-
-
Throat Clearance
5.6 in
-
-
Winch Length
35.63 in
-
-
Overall width
27.91 in
-
-
Weight
1747 lb
-
-
Maximum Line Pull - Full Drum
79 ft/min
-
-
Drum Capacity - Recommended Cable
277 ft
-
-
Maximum Line Pull - Bare Drum
50 ft/min
-
-
Drum Capacity - Optional Cable
195 ft
-
-
Maximum Line Speed - Full Drum
20350 lb
-
-
Control
Hydraulic
-
-
Maximum Line Speed - Bare Drum
32150 lb
-
-
Rope Diameter - Optional
0.75 in
-
-
Winch Drive
Hydraulic
-
-
Rope Diameter - Recommended
0.63 in
-
-
Speed
Variable
-
-
Operating Specifications
Operating Weight
-
105271 lb
-
Blade Capacities
-
7.9 – 22.2 m3 (10.3 – 29.0 yd3)
-
Coal Scoop Operating Weight
-
112428 lb
-
Chip Scoop Operating Weight
-
112838 lb
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
-
Pilot operated LS valve with EH
-
Lift/Tilt System
-
Variable displacement piston
-
Maximum Flow at 1,900 rpm
-
153 gal/min
-
Relief Valve Setting - Lift/Tilt
-
4641 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
-
139.75 mm × 1021 mm (5.5 in × 40.2 in)
-
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
-
140 mm × 230 mm (5.5 in × 9.1 in)
-
Pilot System
-
Variable displacement piston
-
Pilot Maximum Flow
-
13.7 gal/min
-
Pilot Relief Valve Setting
-
580 psi
-
Hydraulic System - Steering
Steering System - Circuit
-
Pilot, load sensing
-
Steering System - Pump
-
Piston, variable displacement
-
Maximum Flow
-
65.8 gal/min
-
Relief Valve Setting - Steering
-
3495 psi
-
Total Steering Angle
-
86 °
-
Steering Cycle Times - High Idle
-
3.1 s
-
Steering Cycle Times - Low Idle
-
5.7 s
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Oscillation Angle
-
±13°
-
Brakes
Brakes
-
ISO 3450: 2011
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
-
72 dB(A)
-
Machine Sound Level (ISO 6395)
-
113 dB(A)
-
Sound Performance - Tier 4 Final/EU Stage V - Suppression