CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D1 Dozer
    View Product
    824K Wheel Dozer
    View Product Remove
    854 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C3.6 Cat® C15 Cat C32B
    Power - Net 80 HP - -
    Displacement 220 in³ 927.6 in³ 1958 in²
    Net Power - 2,200 rpm - SAE J1349 80 HP - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80 HP - -
    Power Train Hydrostatic - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. - Net torque rise meets SAE J139.
    Net Power - ISO 9249 - 405 HP -
    Stroke - 6.7 in 6.4 in
    Gross Power - 435 HP 907 HP
    Emissions - Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards -
    Bore - 5.4 in 5.7 in
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - - 900 HP
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - - 814 HP
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - - 907 HP
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - - 823 HP
    Rated Speed - - 1750 r/min
    Peak Torque - 1,200 rpm - - 3139 lb/ft
    Torque Rise - - 30 %
    Note (3) - - No engine derating required up to 3050 m (10,000 ft) altitude.

    Weights
    Operating Weight 17855 lb - 224647 lb
    Operating Weight - LGP 18839 lb - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - -
    Operating Weight - LGP, 762 mm/30 in 19295 lb - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - -

    Transmission
    Drive Pumps 1 - -
    Maximum Travel Speed - Reverse 6.2 mile/h - -
    Relief Valve Settings 7033 psi - -
    Maximum Travel Speed - Forward 5.6 mile/h - -
    Track Motors 2 - -
    Transmission Type - Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung) Cat Planetary Power Shift
    Converter Drive - Forward 1 - - 4.4 mile/h
    Converter Drive - Forward 2 - - 7.7 mile/h
    Converter Drive - Forward 3 - - 13.2 mile/h
    Converter Drive - Reverse 1 - - 4.8 mile/h
    Converter Drive - Reverse 2 - - 8.4 mile/h
    Converter Drive - Reverse 3 - - 14.6 mile/h
    Direct Drive - Forward 1 - - Lock-up disabled
    Direct Drive - Forward 2 - - 8.1 mile/h
    Direct Drive - Forward 3 - - 14.2 mile/h
    Direct Drive - Reverse 1 - - 5 mile/h
    Direct Drive - Reverse 2 - - 8.9 mile/h
    Direct Drive - Reverse 3 - - 15.6 mile/h
    Note - - Travel speeds based on 45/65-45 L-5 46 ply tires.

    Hydraulic Controls
    Pump Output 17.2 gal/min - -
    Relief Valve Settings 2988 psi - -

    Ripper
    Type Parallelogram - -
    Number of Shanks 3 - -
    Height 6.5 in - -
    Weight 1222 lb - -
    Maximum Ground Clearance Under Tip 17.6 in - -
    Maximum Digging Depth 13.3 in - -
    Overall Width 67.3 in - -
    Maximum Reach - Ground Line 30.2 in - -

    Cab
    FOPS ISO 3449:2005 Level II - -
    ROPS ISO 3471:2008 - -
    ROPS/FOPS - - ISO 3471:2008 and ISO 3449:2005 Level II Standards

    Undercarriage
    Length - Track on Ground - LGP, 762 mm (30 in) 89 in - -
    Length - Track on Ground - LGP 89 in - -
    Track Gauge - LGP 68 in - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    Shoe Width - LGP 25 in - -
    Track Gauge 59 in - -
    Shoe Width - Standard 16 in - -
    Ground Pressure - LGP 4.3 psi - -
    Ground Pressure - LGP, 762 mm (30 in) 3.7 psi - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43 - -
    Number of Rollers - Each Side 6 - -
    Length of Track on Ground 89 in - -
    Number of Shoes - Each Side - Abrasion Undercarriage 38 - -
    Ground Pressure 6.45 psi - -

    Service Refill Capacities
    Final Drive - Each - LGP 2.6 gal (US) - -
    Cooling System 4.2 gal (US) 30.6 gal (US) 53 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - -
    Transmission - Hydraulic Tank 23.8 gal (US) - -
    Crankcase - With Filter 2.8 gal (US) - -
    Fuel Tank 51.5 gal (US) 206.6 gal (US) -
    Final Drives - Each Side 2.6 gal (US) - -
    Differential - Final Drives - Front - 26.4 gal (US) 98 gal (US)
    Differential - Final Drives - Rear - 29.1 gal (US) 90 gal (US)
    Transmission - 17.4 gal (US) 45 gal (US)
    Fuel Tank - Standard - - 413 gal (US)
    Crankcase - - 32 gal (US)
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - - 77 gal (US)
    Note (1) - - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Dimensions
    BLADE: Blade Capacity (SAE) - LGP 2.17 yd³ - -
    BLADE: Blade Lift Height - LGP 28.7 in - -
    BLADE: Maximum Tilt - LGP 17.2 in - -
    BLADE: Blade Width - LGP 124 in - -
    Ground Clearance - LGP 13 in - -
    BLADE: Blade Width at Maximum Angle - LGP 113.1 in - -
    BLADE: Digging Depth - LGP 23 in - -
    Track Gauge - LGP 67.9 in - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - -
    BLADE: Blade Height - LGP 33.8 in - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 167.8 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - -
    Note *Abrasion Undercarriage - -
    BLADE: Maximum Angle (either side) - LGP 25° - -
    Overall Length - With Blade - LGP 167.8 in - -
    BLADE: Blade Width at Maximum Angle - Standard 95.2 in - -
    BLADE: Digging Depth - Standard 23.2 in - -
    BLADE: Blade Width - Standard 104.2 in - -
    BLADE: Blade Lift Height - Standard 28.7 in - -
    Ground Clearance - Standard 13 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58° - -
    BLADE: Maximum Angle (either side) - Standard 25° - -
    BLADE: Maximum Tilt - Standard 14.5 in - -
    BLADE: Blade Capacity (SAE) - Standard 1.99 yd³ - -
    Track Gauge - Standard 58.9 in - -
    BLADE: Blade Height - Standard 35.8 in - -
    Overall Length - With Blade - Standard 168 in - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 129.6 in - -
    Width of Dozer (standard shoes, no blade) - Standard 74.8 in - -
    Length of Basic Dozer (without blade) - Standard 129.6 in - -
    Length of Basic Dozer (without blade) - LGP 129.6 in - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 94.9 in - -
    Dozer Height - LGP 108.9 in - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - -
    Dozer Height - LGP, 762 mm (30 in) 108.9 in - -
    Dozer Height - Standard 108.9 in - -

    High Performance Winch
    Weight 1345 lb - -
    Drum diameter 10 in - -
    Winch drive Hydrostatic - -
    Winch length 27.76 in - -
    Maximum line pull – bare drum 40000 lb - -
    Maximum line speed – full drum 207 ft/min - -
    Drum width 10.8 in - -
    Drum capacity – optional 256 ft - -
    Rope diameter – recommended 0.63 in - -
    Maximum line pull – full drum 25000 lb - -
    Rope diameter – optional 0.75 in - -
    Speed Variable - -
    Maximum line speed – bare drum 131 ft/min - -
    Throat clearance 6.75 in - -
    Drum capacity – recommended cable 371 ft - -
    Overall width 29.2 in - -
    Control Hydraulic - -

    Retrieval Winch
    Drum Diameter 8 in - -
    Drum Width 9.65 in - -
    Throat Clearance 5.6 in - -
    Winch Length 35.63 in - -
    Overall width 27.91 in - -
    Weight 1747 lb - -
    Maximum Line Pull - Full Drum 79 ft/min - -
    Drum Capacity - Recommended Cable 277 ft - -
    Maximum Line Pull - Bare Drum 50 ft/min - -
    Drum Capacity - Optional Cable 195 ft - -
    Maximum Line Speed - Full Drum 20350 lb - -
    Control Hydraulic - -
    Maximum Line Speed - Bare Drum 32150 lb - -
    Rope Diameter - Optional 0.75 in - -
    Winch Drive Hydraulic - -
    Rope Diameter - Recommended 0.63 in - -
    Speed Variable - -

    Axles
    Front - Planetary – Fixed Fixed
    Rear - Planetary – Oscillating Trunnion
    Oscillation Angle - ±11° -

    Operating Specifications
    Operating Weight - 74966 lb 224647 lb

    Dimensions (Approximate)
    Height - Top of Hood - 10.5 ft 13 ft
    Height - Top of Cab - 13.5 ft -
    Wheel Base - 12.1 ft 19.25 ft
    Centerline of Rear Axle to Edge of Bumper - 9.3 ft 13.75 ft
    Height - Top of Exhaust Stack - 14.2 ft -
    Ground Clearance - 1.4 ft 27 in
    Centerline of Front Axle to Hitch - 6.1 ft 9.67 ft
    Height - Top of ROPS - - 18.25 ft
    Height - Top of Exhaust Pipe - - 17.17 ft
    Length - With Blade on Ground - - 44 ft

    Hydraulic System
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 140 mm × 230 mm (5.5 in × 9.1 in) -
    Cylinders, Double Acting - Lift, Bore and Stroke - 120 mm × 1070 mm (4.7 in × 42.1 in) -

    Hydraulic System - Steering
    Steering System - Circuit - Double Acting – End Mounted Pilot, load sensing
    Steering System - Pump - Piston – Variable Displacement Piston, variable displacement
    Minimum Turning Radius - Over Blade - - 31 ft
    Total Steering Angle - - 86 degrees
    Relief Valve Setting - - 5004 psi

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - - 161 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - 177 mm × 1760 mm (0.58 ft × 5.8 ft)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - 267 mm × 286 mm (0.88 ft × 0.94 ft)

    Brakes
    Brakes - - Meets ISO 3540:2011

    Blades
    Blade Capacities - - 30.5 to 44.8 m3 (40 to 58.6 yd3)

    Sound Performance Levels
    Sound Performance - - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was
    Add a Similar Product: