Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
-
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
-
814 HP
-
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
-
907 HP
-
Emissions (Tier 2 Equivalent): Net Power ISO - 9249
-
823 HP
-
Rated Speed
-
1750 r/min
-
Bore
-
5.7 in
-
Stroke
-
6.4 in
-
Peak Torque - 1,200 rpm
-
3139 lb/ft
-
Torque Rise
-
30 %
-
Note (3)
-
No engine derating required up to 3050 m (10,000 ft) altitude.
-
Weights
Operating Weight
17855 lb
224647 lb
-
Operating Weight - LGP
18839 lb
-
-
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
-
-
Operating Weight - LGP, 762 mm/30 in
19295 lb
-
-
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
-
-
Transmission
Drive Pumps
1
-
-
Maximum Travel Speed - Reverse
6.2 mile/h
-
-
Relief Valve Settings
7033 psi
-
-
Maximum Travel Speed - Forward
5.6 mile/h
-
-
Track Motors
2
-
-
Transmission Type
-
Cat Planetary Power Shift
-
Converter Drive - Forward 1
-
4.4 mile/h
-
Converter Drive - Forward 2
-
7.7 mile/h
-
Converter Drive - Forward 3
-
13.2 mile/h
-
Converter Drive - Reverse 1
-
4.8 mile/h
-
Converter Drive - Reverse 2
-
8.4 mile/h
-
Converter Drive - Reverse 3
-
14.6 mile/h
-
Direct Drive - Forward 1
-
Lock-up disabled
-
Direct Drive - Forward 2
-
8.1 mile/h
-
Direct Drive - Forward 3
-
14.2 mile/h
-
Direct Drive - Reverse 1
-
5 mile/h
-
Direct Drive - Reverse 2
-
8.9 mile/h
-
Direct Drive - Reverse 3
-
15.6 mile/h
-
Note
-
Travel speeds based on 45/65-45 L-5 46 ply tires.
-
Hydraulic Controls
Pump Output
17.2 gal/min
-
-
Relief Valve Settings
2988 psi
-
-
Ripper
Type
Parallelogram
-
-
Number of Shanks
3
-
-
Height
6.5 in
-
-
Weight
1222 lb
-
-
Maximum Ground Clearance Under Tip
17.6 in
-
-
Maximum Digging Depth
13.3 in
-
-
Overall Width
67.3 in
-
-
Maximum Reach - Ground Line
30.2 in
-
-
Cab
FOPS
ISO 3449:2005 Level II
-
-
ROPS
ISO 3471:2008
-
-
ROPS/FOPS
-
ISO 3471:2008 and ISO 3449:2005 Level II Standards
-
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in)
89 in
-
-
Length - Track on Ground - LGP
89 in
-
-
Track Gauge - LGP
68 in
-
-
Shoe Width - LGP, 762 mm (30 in)
30 in
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
Shoe Width - LGP
25 in
-
-
Track Gauge
59 in
-
-
Shoe Width - Standard
16 in
-
-
Ground Pressure - LGP
4.3 psi
-
-
Ground Pressure - LGP, 762 mm (30 in)
3.7 psi
-
-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
-
-
Number of Rollers - Each Side
6
-
-
Length of Track on Ground
89 in
-
-
Number of Shoes - Each Side - Abrasion Undercarriage
38
-
-
Ground Pressure
6.45 psi
-
-
Service Refill Capacities
Final Drive - Each - LGP
2.6 gal (US)
-
-
Cooling System
4.2 gal (US)
53 gal (US)
-
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
-
-
Transmission - Hydraulic Tank
23.8 gal (US)
-
-
Crankcase - With Filter
2.8 gal (US)
-
-
Fuel Tank
51.5 gal (US)
-
-
Final Drives - Each Side
2.6 gal (US)
-
-
Fuel Tank - Standard
-
413 gal (US)
-
Crankcase
-
32 gal (US)
-
Transmission
-
45 gal (US)
-
Differential - Final Drives - Front
-
98 gal (US)
-
Differential - Final Drives - Rear
-
90 gal (US)
-
Hydraulic System - Steering and Engine Cooling Fan - Tank Only
-
77 gal (US)
-
Note (1)
-
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.8 kg of refrigerant which has a CO2 equivalent
of 2.574 metric tonnes.
-
Dimensions
BLADE: Blade Capacity (SAE) - LGP
2.17 yd³
-
-
BLADE: Blade Lift Height - LGP
28.7 in
-
-
BLADE: Maximum Tilt - LGP
17.2 in
-
-
BLADE: Blade Width - LGP
124 in
-
-
Ground Clearance - LGP
13 in
-
-
BLADE: Blade Width at Maximum Angle - LGP
113.1 in
-
-
BLADE: Digging Depth - LGP
23 in
-
-
Track Gauge - LGP
67.9 in
-
-
Ground Clearance - LGP, 762 mm (30 in)
13 in
-
-
BLADE: Blade Height - LGP
33.8 in
-
-
Overall Length - With Blade - LGP, 762 mm (30 in)
167.8 in
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
-
-
Note
*Abrasion Undercarriage
-
-
BLADE: Maximum Angle (either side) - LGP
25°
-
-
Overall Length - With Blade - LGP
167.8 in
-
-
BLADE: Blade Width at Maximum Angle - Standard
95.2 in
-
-
BLADE: Digging Depth - Standard
23.2 in
-
-
BLADE: Blade Width - Standard
104.2 in
-
-
BLADE: Blade Lift Height - Standard
28.7 in
-
-
Ground Clearance - Standard
13 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
-
-
BLADE: Maximum Angle (either side) - Standard
25°
-
-
BLADE: Maximum Tilt - Standard
14.5 in
-
-
BLADE: Blade Capacity (SAE) - Standard
1.99 yd³
-
-
Track Gauge - Standard
58.9 in
-
-
BLADE: Blade Height - Standard
35.8 in
-
-
Overall Length - With Blade - Standard
168 in
-
-
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129.6 in
-
-
Width of Dozer (standard shoes, no blade) - Standard
74.8 in
-
-
Length of Basic Dozer (without blade) - Standard
129.6 in
-
-
Length of Basic Dozer (without blade) - LGP
129.6 in
-
-
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
94.9 in
-
-
Dozer Height - LGP
108.9 in
-
-
Width of Dozer (standard shoes, no blade) - LGP
92.9 in
-
-
Dozer Height - LGP, 762 mm (30 in)
108.9 in
-
-
Dozer Height - Standard
108.9 in
-
-
High Performance Winch
Weight
1345 lb
-
-
Drum diameter
10 in
-
-
Winch drive
Hydrostatic
-
-
Winch length
27.76 in
-
-
Maximum line pull – bare drum
40000 lb
-
-
Maximum line speed – full drum
207 ft/min
-
-
Drum width
10.8 in
-
-
Drum capacity – optional
256 ft
-
-
Rope diameter – recommended
0.63 in
-
-
Maximum line pull – full drum
25000 lb
-
-
Rope diameter – optional
0.75 in
-
-
Speed
Variable
-
-
Maximum line speed – bare drum
131 ft/min
-
-
Throat clearance
6.75 in
-
-
Drum capacity – recommended cable
371 ft
-
-
Overall width
29.2 in
-
-
Control
Hydraulic
-
-
Retrieval Winch
Drum Diameter
8 in
-
-
Drum Width
9.65 in
-
-
Throat Clearance
5.6 in
-
-
Winch Length
35.63 in
-
-
Overall width
27.91 in
-
-
Weight
1747 lb
-
-
Maximum Line Pull - Full Drum
79 ft/min
-
-
Drum Capacity - Recommended Cable
277 ft
-
-
Maximum Line Pull - Bare Drum
50 ft/min
-
-
Drum Capacity - Optional Cable
195 ft
-
-
Maximum Line Speed - Full Drum
20350 lb
-
-
Control
Hydraulic
-
-
Maximum Line Speed - Bare Drum
32150 lb
-
-
Rope Diameter - Optional
0.75 in
-
-
Winch Drive
Hydraulic
-
-
Rope Diameter - Recommended
0.63 in
-
-
Speed
Variable
-
-
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)
-
161 gal/min
-
Cylinders, Double Acting - Lift, Bore and Stroke
-
177 mm × 1760 mm (0.58 ft × 5.8 ft)
-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
-
267 mm × 286 mm (0.88 ft × 0.94 ft)
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Brakes
Brakes
-
Meets ISO 3540:2011
-
Blades
Blade Capacities
-
30.5 to 44.8 m3 (40 to 58.6 yd3)
-
Dimensions (Approximate)
Height - Top of ROPS
-
18.25 ft
-
Height - Top of Exhaust Pipe
-
17.17 ft
-
Height - Top of Hood
-
13 ft
-
Ground Clearance
-
27 in
-
Centerline of Front Axle to Hitch
-
9.67 ft
-
Centerline of Rear Axle to Edge of Bumper
-
13.75 ft
-
Wheel Base
-
19.25 ft
-
Length - With Blade on Ground
-
44 ft
-
Hydraulic System - Steering
Steering System - Pump
-
Piston, variable displacement
-
Minimum Turning Radius - Over Blade
-
31 ft
-
Steering System - Circuit
-
Pilot, load sensing
-
Total Steering Angle
-
86 degrees
-
Relief Valve Setting
-
5004 psi
-
Operating Specifications
Operating Weight
-
224647 lb
-
Sound Performance Levels
Sound Performance
-
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was
