CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D1 Dozer
    View Product
    D6 XE Dozer
    View Product Remove
    854 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C3.6 Cat C9.3B Cat C32B
    Power - Net 80 hp 215 hp -
    Displacement 220 in³ - 1958 in²
    Net Power - 2,200 rpm - SAE J1349 80 hp - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80 hp - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( Net torque rise meets SAE J139.
    Net Power - Rated - ISO 9249/SAE J1349 - 215 hp -
    Net Power (Rated) - ISO 9249 (DIN) - 219 mhp -
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V -
    Note (3) - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. No engine derating required up to 3050 m (10,000 ft) altitude.
    Note (4) - Machine Build Number 20B -
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - - 814 hp
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - - 900 hp
    Gross Power - - 907 hp
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - - 907 hp
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - - 823 hp
    Rated Speed - - 1750 r/min
    Bore - - 5.7 in
    Stroke - - 6.4 in
    Peak Torque - 1,200 rpm - - 3139 lb/ft
    Torque Rise - - 30 %

    Weights
    Operating Weight 17855 lb 51333 lb 224647 lb
    Operating Weight - LGP 18839 lb - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - -
    Operating Weight - LGP, 762 mm/30 in 19295 lb - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - -

    Transmission
    Drive Pumps 1 - -
    Maximum Travel Speed - Reverse 6.2 mile/h - -
    Relief Valve Settings 7033 psi - -
    Maximum Travel Speed - Forward 5.6 mile/h - -
    Track Motors 2 - -
    Powertrain - Electric Drive -
    Transmission Type - - Cat Planetary Power Shift
    Converter Drive - Forward 1 - - 4.4 mile/h
    Converter Drive - Forward 2 - - 7.7 mile/h
    Converter Drive - Forward 3 - - 13.2 mile/h
    Converter Drive - Reverse 1 - - 4.8 mile/h
    Converter Drive - Reverse 2 - - 8.4 mile/h
    Converter Drive - Reverse 3 - - 14.6 mile/h
    Direct Drive - Forward 1 - - Lock-up disabled
    Direct Drive - Forward 2 - - 8.1 mile/h
    Direct Drive - Forward 3 - - 14.2 mile/h
    Direct Drive - Reverse 1 - - 5 mile/h
    Direct Drive - Reverse 2 - - 8.9 mile/h
    Direct Drive - Reverse 3 - - 15.6 mile/h
    Note - - Travel speeds based on 45/65-45 L-5 46 ply tires.

    Hydraulic Controls
    Pump Output 17.2 gpm - -
    Relief Valve Settings 2988 psi - -

    Ripper
    Type Parallelogram - -
    Number of Shanks 3 - -
    Height 6.5 in - -
    Weight 1222 lb - -
    Maximum Ground Clearance Under Tip 17.6 in - -
    Maximum Digging Depth 13.3 in - -
    Overall Width 67.3 in - -
    Maximum Reach - Ground Line 30.2 in - -

    Engine 
    Power Train  Hydrostatic - -

    Cab
    FOPS ISO 3449:2005 Level II - -
    ROPS ISO 3471:2008 - -
    ROPS/FOPS - - ISO 3471:2008 and ISO 3449:2005 Level II Standards

    Undercarriage
    Length - Track on Ground - LGP, 762 mm (30 in) 89 in - -
    Length - Track on Ground - LGP 89 in - -
    Track Gauge - LGP 68 in - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    Shoe Width - LGP 25 in - -
    Track Gauge 59 in - -
    Shoe Width - Standard 16 in - -
    Ground Pressure - LGP 4.3 psi - -
    Ground Pressure - LGP, 762 mm (30 in) 3.7 psi - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43 - -
    Number of Rollers - Each Side 6 - -

    Undercarriage 
    Length of Track on Ground  89 in - -
    Number of Shoes - Each Side - Abrasion Undercarriage  38 - -
    Ground Pressure  6.45 psi - -

    Service Refill Capacities
    Final Drive - Each - LGP 2.6 gal (US) - -
    Cooling System 4.2 gal (US) - 53 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - -
    Transmission - Hydraulic Tank 23.8 gal (US) - -
    Crankcase - With Filter 2.8 gal (US) - -
    Fuel Tank 51.5 gal (US) 90 gal (US) -
    DEF Tank - 7.4 gal (US) -
    Fuel Tank - Standard - - 413 gal (US)
    Crankcase - - 32 gal (US)
    Transmission - - 45 gal (US)
    Differential - Final Drives - Front - - 98 gal (US)
    Differential - Final Drives - Rear - - 90 gal (US)
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - - 77 gal (US)
    Note (1) - - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo

    Service Refill Capacities 
    Final Drives - Each Side  2.6 gal (US) - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). See the label or instruction manual for identification of the gas. If equipped with 1234yf (Global Warming Potential =

    Dimensions
    BLADE: Blade Capacity (SAE) - LGP 2.17 yd³ - -
    BLADE: Blade Lift Height - LGP 28.7 in - -
    BLADE: Maximum Tilt - LGP 17.2 in - -
    BLADE: Blade Width - LGP 124 in - -
    Ground Clearance - LGP 13 in - -
    BLADE: Blade Width at Maximum Angle - LGP 113.1 in - -
    BLADE: Digging Depth - LGP 23 in - -
    Track Gauge - LGP 67.9 in - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - -
    BLADE: Blade Height - LGP 33.8 in - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 167.8 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - -
    BLADE: Maximum Angle (either side) - LGP 25° - -
    Overall Length - With Blade - LGP 167.8 in - -
    Note *Abrasion Undercarriage - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 129.6 in - -
    Width of Dozer (standard shoes, no blade) - Standard 74.8 in - -
    Length of Basic Dozer (without blade) - Standard 129.6 in - -
    Length of Basic Dozer (without blade) - LGP 129.6 in - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 94.9 in - -
    Dozer Height - LGP 108.9 in - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - -
    Dozer Height - LGP, 762 mm (30 in) 108.9 in - -
    Dozer Height - Standard 108.9 in - -

    Dimensions 
    Note  With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) - -
    BLADE: Blade Width at Maximum Angle - Standard  95.2 in - -
    BLADE: Digging Depth - Standard  23.2 in - -
    BLADE: Blade Width - Standard  104.2 in - -
    BLADE: Blade Lift Height - Standard  28.7 in - -
    Ground Clearance - Standard  13 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard  52° to 58° - -
    BLADE: Maximum Angle (either side) - Standard  25° - -
    BLADE: Maximum Tilt - Standard  14.5 in - -
    BLADE: Blade Capacity (SAE) - Standard  1.99 yd³ - -
    Track Gauge - Standard  58.9 in - -
    BLADE: Blade Height - Standard  35.8 in - -
    Overall Length - With Blade - Standard  168 in - -

    High Performance Winch
    Weight 1345 lb - -
    Drum diameter 10 in - -
    Winch drive Hydrostatic - -
    Winch length 27.76 in - -
    Maximum line pull – bare drum 40000 lb - -
    Maximum line speed – full drum 207 ft/min - -
    Drum width 10.8 in - -
    Drum capacity – optional 256 ft - -
    Rope diameter – recommended 0.63 in - -
    Maximum line pull – full drum 25000 lb - -
    Rope diameter – optional 0.75 in - -
    Speed Variable - -
    Maximum line speed – bare drum 131 ft/min - -
    Throat clearance 6.75 in - -
    Drum capacity – recommended cable 371 ft - -
    Overall width 29.2 in - -
    Control Hydraulic - -

    Retrieval Winch
    Drum Diameter 8 in - -
    Drum Width 9.65 in - -
    Throat Clearance 5.6 in - -
    Winch Length 35.63 in - -
    Overall width 27.91 in - -
    Weight 1747 lb - -
    Maximum Line Pull - Full Drum 79 ft/min - -
    Drum Capacity - Recommended Cable 277 ft - -
    Maximum Line Pull - Bare Drum 50 ft/min - -
    Drum Capacity - Optional Cable 195 ft - -
    Maximum Line Speed - Full Drum 20350 lb - -
    Control Hydraulic - -
    Maximum Line Speed - Bare Drum 32150 lb - -
    Rope Diameter - Optional 0.75 in - -
    Winch Drive Hydraulic - -
    Rope Diameter - Recommended 0.63 in - -
    Speed Variable - -

    D6 XE Push Arm
    Operating Weight - 49388 lb -
    Ground Pressure - 8 psi -
    Width of Standard Shoe - 24 in -
    Blade - Semi-Universal (SU) -
    Blade Capacity - 7.5 yd³ -

    D6 XE LGP (30-in) Push Arm
    Operating Weight - 51020 lb -
    Ground Pressure - 6.6 psi -
    Width of Standard Shoe - 30 in -
    Blade - Semi-Universal (SU) -
    Blade Capacity - 7.6 yd³ -

    D6 XE LGP (36-in) Push Arm
    Operating Weight - 53315 lb -
    Ground Pressure - 5.3 psi -
    Width of Standard Shoe - 36 in -
    Blade - Straight -
    Blade Capacity - 5 yd³ -

    D6 XE VPAT
    Operating Weight - 49708 lb -
    Ground Pressure - 7.2 psi -
    Width of Standard Shoe - 24 in -
    Blade - VPAT -
    Blade Capacity - 5.4 yd³ -

    D6 XE LGP (30-in) VPAT
    Operating Weight - 51333 lb -
    Ground Pressure - 5.9 psi -
    Width of Standard Shoe - 30 in -
    Blade - VPAT -
    Blade Capacity - 5.9 yd³ -

    D6 XE LGP (36-in) VPAT
    Operating Weight - 52512 lb -
    Ground Pressure - 5.1 psi -
    Width of Standard Shoe - 36 in -
    Blade - VPAT -
    Blade Capacity - 6.5 yd³ -

    Sustainability
    Recyclability - 98% -

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - - 161 gpm
    Cylinders, Double Acting - Lift, Bore and Stroke - - 177 mm × 1760 mm (0.58 ft × 5.8 ft)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - 267 mm × 286 mm (0.88 ft × 0.94 ft)

    Axles
    Front - - Fixed
    Rear - - Trunnion

    Brakes
    Brakes - - Meets ISO 3540:2011

    Blades
    Blade Capacities - - 30.5 to 44.8 m3 (40 to 58.6 yd3)

    Dimensions (Approximate)
    Height - Top of ROPS - - 18.25 ft
    Height - Top of Exhaust Pipe - - 17.17 ft
    Height - Top of Hood - - 13 ft
    Ground Clearance - - 27 in
    Centerline of Front Axle to Hitch - - 9.67 ft
    Centerline of Rear Axle to Edge of Bumper - - 13.75 ft
    Wheel Base - - 19.25 ft
    Length - With Blade on Ground - - 44 ft

    Hydraulic System - Steering
    Steering System - Pump - - Piston, variable displacement
    Minimum Turning Radius - Over Blade - - 31 ft
    Steering System - Circuit - - Pilot, load sensing
    Total Steering Angle - - 86 degrees
    Relief Valve Setting - - 5004 psi

    Operating Specifications
    Operating Weight - - 224647 lb

    Sound Performance Levels
    Sound Performance - - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was
    Add a Similar Product: