CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D1 Dozer
    View Product
    834 Wheel Dozer
    View Product Remove
    D9 Dozer
    View Product Remove

    Engine
    Engine Model Cat C3.6 Cat® C18 -
    Power - Net 80 HP - -
    Displacement 220 in³ 1105 in³ -
    Net Power - 2,200 rpm - SAE J1349 80 HP - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80 HP - -
    Power Train Hydrostatic - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. - -
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. - -
    Rated Speed - 1900 r/min -
    Peak Power Speed - 1500 r/min -
    Gross Power - SAE J1995 - 562 HP -
    Net Power - SAE J1349 - 496 HP -
    Bore - 5.7 in -
    Stroke - 7.2 in -
    Peak Torque - 1,300 rpm - 2092 lb/ft -
    Torque Rise - 52 % -
    Emissions - U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. -

    Weights
    Operating Weight 17855 lb - 110225 lb
    Operating Weight - LGP 18839 lb - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
    Operating Weight - LGP, 762 mm/30 in 19295 lb - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
    Shipping Weight - - 84373 lb

    Transmission
    Drive Pumps 1 - -
    Maximum Travel Speed - Reverse 6.2 mile/h - -
    Relief Valve Settings 7033 psi - -
    Maximum Travel Speed - Forward 5.6 mile/h - -
    Track Motors 2 - -
    Transmission Type - Cat planetary power shift -
    Forward - 1 - 4.2 mile/h -
    Forward - 2 - 7.2 mile/h -
    Forward - 3 - 12.6 mile/h -
    Forward - 4 - 22 mile/h -
    Reverse - 1 - 4.2 mile/h -
    Reverse - 2 - 7.6 mile/h -
    Reverse - 3 - 13.3 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 7.7 mile/h -
    Direct Drive - Forward 3 - 13.7 mile/h -
    Direct Drive - Forward 4 - 23.9 mile/h -
    Direct Drive - Reverse 1 - 4.5 mile/h -
    Direct Drive - Reverse 2 - 8.1 mile/h -
    Direct Drive - Reverse 3 - 14.3 mile/h -
    1.0 Forward - - 2.2 mile/h
    2.0 Forward - - 3.9 mile/h
    3.0 Forward - - 6.8 mile/h
    1.0 Reverse - - 2.7 mile/h
    2.0 Reverse - - 4.8 mile/h
    3.0 Reverse - - 8.4 mile/h
    Type - - Planetary powershift

    Hydraulic Controls
    Pump Output 17.2 gal/min - -
    Relief Valve Settings 2988 psi - -
    Pump Type - - Piston-type geared to flywheel
    Pump Output - Steering - - 96 gal/min
    Fan Pump - - 21 gal/min
    Tilt Cylinder Flow - Rod End Flow - - 53 gal/min
    Tilt Cylinder Flow - Head End Flow - - 53 gal/min
    Lift Cylinder Relief Valve Setting - - 3800 lbf/in
    Tilt Cylinder Relief Valve Setting - - 2799 psi
    Ripper - Lift - Relief Valve Setting - - 3800 psi
    Ripper - Pitch - Relief Valve Setting - - 3800 psi
    Steering System - Pressure - - 5874 psi
    Tank Capacity - - 24 gal/min
    Note (1) - - Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
    Note (2) - - Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
    Note (3) - - Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)

    Ripper
    Type Parallelogram - -
    Number of Shanks 3 - -
    Height 6.5 in - -
    Weight 1222 lb - -
    Maximum Ground Clearance Under Tip 17.6 in - -
    Maximum Digging Depth 13.3 in - -
    Overall Width 67.3 in - -
    Maximum Reach - Ground Line 30.2 in - -

    Cab
    FOPS ISO 3449:2005 Level II - -
    ROPS ISO 3471:2008 - -

    Undercarriage
    Length - Track on Ground - LGP, 762 mm (30 in) 89 in - -
    Length - Track on Ground - LGP 89 in - -
    Track Gauge - LGP 68 in - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    Shoe Width - LGP 25 in - -
    Track Gauge 59 in - 88.6 in
    Shoe Width - Standard 16 in - -
    Ground Pressure - LGP 4.3 psi - -
    Ground Pressure - LGP, 762 mm (30 in) 3.7 psi - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43 - -
    Number of Rollers - Each Side 6 - -
    Length of Track on Ground 89 in - -
    Number of Shoes - Each Side - Abrasion Undercarriage 38 - -
    Ground Pressure 6.45 psi - -
    Shoe Type - - Extreme Service
    Width - Shoe - - 24 in
    Shoes/Side - - 43
    Grouser Height - - 3.3 in
    Pitch - - 9.4 in
    Ground Clearance - - 18.1 in
    Length - Track on Ground - - 136.6 in
    Ground Contact Area - - 45.6 ft²
    Track Rollers/Side - - 8
    Number of Carrier Rollers - - 1 per side (optional)

    Service Refill Capacities
    Final Drive - Each - LGP 2.6 gal (US) - -
    Cooling System 4.2 gal (US) 31.7 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - -
    Transmission - Hydraulic Tank 23.8 gal (US) - -
    Crankcase - With Filter 2.8 gal (US) - -
    Fuel Tank 51.5 gal (US) 209.5 gal (US) -
    Final Drives - Each Side 2.6 gal (US) - -
    Crankcase - 15.9 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) -
    Transmission - 31.7 gal (US) -
    Hydraulic System Factory Fill - 63.4 gal (US) -
    Differential - Final Drives - Front - 49.1 gal (US) -
    Differential - Final Drives - Rear - 49.1 gal (US) -
    Hydraulic System - Tank Only - 37 gal (US) -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.

    Dimensions
    BLADE: Blade Capacity (SAE) - LGP 2.17 yd³ - -
    BLADE: Blade Lift Height - LGP 28.7 in - -
    BLADE: Maximum Tilt - LGP 17.2 in - -
    BLADE: Blade Width - LGP 124 in - -
    Ground Clearance - LGP 13 in - -
    BLADE: Blade Width at Maximum Angle - LGP 113.1 in - -
    BLADE: Digging Depth - LGP 23 in - -
    Track Gauge - LGP 67.9 in - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - -
    BLADE: Blade Height - LGP 33.8 in - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 167.8 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - -
    Note *Abrasion Undercarriage - -
    BLADE: Maximum Angle (either side) - LGP 25° - -
    Overall Length - With Blade - LGP 167.8 in - -
    BLADE: Blade Width at Maximum Angle - Standard 95.2 in - -
    BLADE: Digging Depth - Standard 23.2 in - -
    BLADE: Blade Width - Standard 104.2 in - -
    BLADE: Blade Lift Height - Standard 28.7 in - -
    Ground Clearance - Standard 13 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58° - -
    BLADE: Maximum Angle (either side) - Standard 25° - -
    BLADE: Maximum Tilt - Standard 14.5 in - -
    BLADE: Blade Capacity (SAE) - Standard 1.99 yd³ - -
    Track Gauge - Standard 58.9 in - -
    BLADE: Blade Height - Standard 35.8 in - -
    Overall Length - With Blade - Standard 168 in - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 129.6 in - -
    Width of Dozer (standard shoes, no blade) - Standard 74.8 in - -
    Length of Basic Dozer (without blade) - Standard 129.6 in - -
    Length of Basic Dozer (without blade) - LGP 129.6 in - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 94.9 in - -
    Dozer Height - LGP 108.9 in - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - -
    Dozer Height - LGP, 762 mm (30 in) 108.9 in - -
    Dozer Height - Standard 108.9 in - -
    Height - Top of Exhaust Stack - 15.9 ft -
    Height - Top of Air Cleaner - 12.8 ft -
    Height - Top of Hood - 10.9 ft -
    Ground Clearance - Bumper - 3.1 ft -
    Centerline of Rear Axle to Edge of Bumper - 10.5 ft -
    Wheel Base - 14.9 ft -
    Length - Front of Tire - 28.4 ft -
    Length - Straight Blade on Ground - 32.6 ft -
    Centerline of Front Axle to Hitch - 7.5 ft -
    Length - Universal Blade on Ground - 34.4 ft -
    Ground Clearance - 1.7 ft -
    Height - Top of Cab - 13.7 ft -

    High Performance Winch
    Weight 1345 lb - -
    Drum diameter 10 in - -
    Winch drive Hydrostatic - -
    Winch length 27.76 in - -
    Maximum line pull – bare drum 40000 lb - -
    Maximum line speed – full drum 207 ft/min - -
    Drum width 10.8 in - -
    Drum capacity – optional 256 ft - -
    Rope diameter – recommended 0.63 in - -
    Maximum line pull – full drum 25000 lb - -
    Rope diameter – optional 0.75 in - -
    Speed Variable - -
    Maximum line speed – bare drum 131 ft/min - -
    Throat clearance 6.75 in - -
    Drum capacity – recommended cable 371 ft - -
    Overall width 29.2 in - -
    Control Hydraulic - -

    Retrieval Winch
    Drum Diameter 8 in - -
    Drum Width 9.65 in - -
    Throat Clearance 5.6 in - -
    Winch Length 35.63 in - -
    Overall width 27.91 in - -
    Weight 1747 lb - -
    Maximum Line Pull - Full Drum 79 ft/min - -
    Drum Capacity - Recommended Cable 277 ft - -
    Maximum Line Pull - Bare Drum 50 ft/min - -
    Drum Capacity - Optional Cable 195 ft - -
    Maximum Line Speed - Full Drum 20350 lb - -
    Control Hydraulic - -
    Maximum Line Speed - Bare Drum 32150 lb - -
    Rope Diameter - Optional 0.75 in - -
    Winch Drive Hydraulic - -
    Rope Diameter - Recommended 0.63 in - -
    Speed Variable - -

    Operating Specifications
    Operating Weight - 105271 lb -
    Blade Capacities - 7.9 – 22.2 m3 (10.3 – 29.0 yd3) -
    Coal Scoop Operating Weight - 112428 lb -
    Chip Scoop Operating Weight - 112838 lb -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH -
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 1,900 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4641 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 139.75 mm × 1021 mm (5.5 in × 40.2 in) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 140 mm × 230 mm (5.5 in × 9.1 in) -
    Pilot System - Variable displacement piston -
    Pilot Maximum Flow - 13.7 gal/min -
    Pilot Relief Valve Setting - 580 psi -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing -
    Steering System - Pump - Piston, variable displacement -
    Maximum Flow - 65.8 gal/min -
    Relief Valve Setting - Steering - 3495 psi -
    Total Steering Angle - 86 ° -
    Steering Cycle Times - High Idle - 3.1 s -
    Steering Cycle Times - Low Idle - 5.7 s -

    Axles
    Front - Fixed -
    Rear - Trunnion -
    Oscillation Angle - ±13° -

    Brakes
    Brakes - ISO 3450: 2011 -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 113 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 109 dB(A) -

    Scoops
    Chip Scoop Carry Capacity - 35 yd³ -
    Chip Scoop Doze Capacity - 70 yd³ -
    Coal Scoop Carry Capacity - 30 yd³ -
    Coal Scoop Doze Capacity - 60 yd³ -

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - - Cat® C18
    Engine Power - Net SAE J1349/ISO 9249 - - 452 HP
    Bore - - 5.7 in³
    Stroke - - 7.2 in
    Displacement - - 1106 in³
    Engine Power - Gross SAE J1995 - - 487 HP
    Engine Power - ISO 14396 - - 479 HP
    Emissions - - U.S. EPA Tier 2 or Tier 3 equivalent
    Note (1) - - All engine ratings apply at 1,750 rpm.
    Note (2) - - No derating required up to 4267 m (14,000 ft) altitude.

    Standards
    ROPS - - Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
    FOPS - - Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
    Sound - - The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
    Sound (1) - - The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
    Sound (2) - - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.

    Steering and Brakes
    Steering Type - - Differential
    Brake Type - - Spring Applied Wet Disc
    Brake Diameter - - 15.5 in
    Brake Count - - 8

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - - Cat® C18
    Bore - - 5.7 in³
    Stroke - - 7.2 in³
    Displacement - - 1106 in³
    Engine Power - Gross SAE J1995 - - 477 HP
    Engine Power - ISO 14396 - - 468 HP
    Engine Power - Net SAE J1349/ISO 9249 - - 440 HP
    Emissions - - U.S. EPA Tier 4 / EU Stage V
    Note (1) - - All Engine ratings apply at 1,750 rpm.
    Note (2) - - No derating required up to 2499 m (8,200 ft).

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) - - 254 gal (US)
    DEF Tank (Tier 4 only) - - 9.5 gal (US)
    Fuel Tank (Fast Fill) - - 248 gal (US)
    Cooling System - - 21 gal (US)
    Engine Crankcase* - - 10 gal (US)
    Powertrain - - 40 gal (US)
    Final Drives (each) - - 4 gal (US)
    Roller Frames (each) - - 12 gal (US)
    Pivot Shaft Oil - - 8 gal (US)
    Hydraulic System Tank - - 24 gal (US)
    Note - - *With oil filters.
    Note 2 - - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
    Note 3 - - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
    Note 4 - - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - - 17.8 yd³
    Blade Width (over end bits) - - 171.3 in
    Blade Height - - 76.1 in
    Maximum Digging Depth - - 23.9 in
    Ground Clearance at Full Lift - - 56 in
    Maximum Tilt - - 37 in
    Blade Weight - - 10587 lb
    Total Operating Weight* (with blade and single-shank ripper) - - 110205 lb
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Blade - Universal
    Blade Capacity (SAE J1265) - - 21.7 yd³
    Blade Width (over end bits) - - 184.3 in
    Blade Height - - 76.1 in
    Maximum Digging Depth - - 23.9 in
    Ground Clearance at Full Lift - - 56 in
    Maximum Tilt - - 39.9 in
    Blade Weight - - 12016 lb
    Total Operating Weight* (with blade and single-shank ripper) - - 111362 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - - 35520 lbf
    Maximum penetration depth (standard tip) - - 48.5 in
    Pryout Force - - 74637 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.7 in
    Number of Pockets - - 1
    Weight - - 10701 lb
    Total Operating Weight* (with SU Blade and noted ripper) - - 110205 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - - 38667 lbf
    Maximum penetration depth (standard tip) - - 68 in
    Pryout Force - - 74412 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 32.2 in
    Number of Pockets - - 1
    Weight - - 10981 lb
    Total Operating Weight* (with SU Blade and noted ripper) - - 110485 lb
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical - - 34621 lbf
    Maximum Penetration - Standard Tip - - 31.4 in
    Pry-Out Force - Multi-Shank Ripper with One Tooth - - 81156 lbf
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.6 in
    Number of Pockets - - 3
    Weight - - 12136 lb
    Total Operating Weight* - With SU-Blade and Ripper - - 111739 lb
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.

    Dimensions (Approximate)
    Ground Clearance* - - 18.1 in
    Track Gauge - - 88.6 in
    Width - Without Trunnions - Standard Shoe - - 113 in
    Width - Over Trunnions - - 130.3 in
    Height - FOPS Cab* - - 150.4 in
    Height - Top of Stack* - - 152.6 in
    Height - ROPS/Canopy* - - 157.5 in
    Drawbar Height (Center of Clevis)* - - 30 in
    Length - Track on Ground - - 136.6 in
    Overall Length - Basic Tractor - - 193.3 in
    Length - Basic Tractor - With Drawbar - - 206.4 in
    Length - Basic Tractor - With Winch - - 218.3 in
    Length - With SU-Blade** - - 259.9 in
    Length - With U-Blade - - 274.3 in
    Length - With Single-Shank Ripper - - 257 in
    Length - With Multi-Shank Ripper - - 257.4 in
    Overall Length - SU-Blade/SS Ripper - - 323.6 in
    Note (1) - - *Includes grouser height for total dimensions on hard surfaces.

    Winches
    Winch Model - - PA 140VS
    Weight* - - 3950 lb
    Oil Capacity - - 4 gal (US)
    Drum Width - - 12.6 in
    Wire Cable Diameter - Recommended - - 1.13 in
    Wire Cable Diameter - Optional - - 1.25 ft
    Maximum Drum Capacity - Recommended Cable Length - - 257 in
    Maximum Drum Capacity - Optional Cable Length - - 204 ft
    Wire Cable Ferrule Size - Outside Diameter - - 2.4 in
    Wire Cable Ferrule Size - Length - - 2.8 in
    Note - - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
    Note (2) - - Variable speed, hydraulically driven, dual braking system, three-roller fairlead.
    Add a Similar Product: