CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D1 Dozer
    View Product
    D11 Dozer
    View Product Remove
    D5 Dozer
    View Product Remove

    Engine
    Engine Model Cat C3.6 - Cat C7.1
    Power - Net 80 HP - 170 HP
    Displacement 220 in³ - -
    Net Power - 2,200 rpm - SAE J1349 80 HP - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80 HP - -
    Power Train Hydrostatic - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. - Rated horsepower at 1770 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
    Net Power - Rated - ISO 9249/SAE J1349 - - 170 HP
    Net Power (Rated) - ISO 9249 (DIN) - - 172 mhp
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)/Korea Stage V
    Note (3) - - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
    Note (4) - - Machine Build Number 17B

    Weights
    Operating Weight 17855 lb 229800 lb 42263 lb
    Operating Weight - LGP 18839 lb - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. -
    Operating Weight - LGP, 762 mm/30 in 19295 lb - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. -
    Operating Weight - Carrydozer - 250665 lb -

    Transmission
    Drive Pumps 1 - -
    Maximum Travel Speed - Reverse 6.2 mile/h - -
    Relief Valve Settings 7033 psi - -
    Maximum Travel Speed - Forward 5.6 mile/h - -
    Track Motors 2 - -
    1.0 Forward - 2.5 mile/h -
    2.0 Forward - 4.4 mile/h -
    3.0 Forward - 7.6 mile/h -
    1.0 Reverse - 3 mile/h -
    2.0 Reverse - 5.3 mile/h -
    3.0 Reverse - 9.1 mile/h -
    Drawbar Pull - 3 Forward - 46250 ft·lbf -
    Drawbar Pull - 1 Forward - 148200 ft·lbf -
    Drawbar Pull - 2 Forward - 82300 ft·lbf -
    Power Train - - Fully Automatic 3-Speed

    Hydraulic Controls
    Pump Output 17.2 gal/min - -
    Relief Valve Settings 2988 psi - -
    Pump Type - Variable displacement piston pump -
    Combined Pump Output - Implement - 177 gal/min -

    Ripper
    Type Parallelogram - -
    Number of Shanks 3 - -
    Height 6.5 in - -
    Weight 1222 lb - -
    Maximum Ground Clearance Under Tip 17.6 in - -
    Maximum Digging Depth 13.3 in - -
    Overall Width 67.3 in - -
    Maximum Reach - Ground Line 30.2 in - -

    Cab
    FOPS ISO 3449:2005 Level II - -
    ROPS ISO 3471:2008 - -

    Undercarriage
    Length - Track on Ground - LGP, 762 mm (30 in) 89 in - -
    Length - Track on Ground - LGP 89 in - -
    Track Gauge - LGP 68 in - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    Shoe Width - LGP 25 in - -
    Track Gauge 59 in 114 in -
    Shoe Width - Standard 16 in - -
    Ground Pressure - LGP 4.3 psi - -
    Ground Pressure - LGP, 762 mm (30 in) 3.7 psi - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43 - -
    Number of Rollers - Each Side 6 - -
    Length of Track on Ground 89 in - -
    Number of Shoes - Each Side - Abrasion Undercarriage 38 - -
    Ground Pressure 6.45 psi - -
    Shoe Type - Extreme Service -
    Width - Shoe - 28 in -
    Width - Shoe - CD - 36 in -
    Shoes/Side - 41 -
    Grouser Height - 4 in -
    Pitch - 12.5 in -
    Ground Clearance* - 30.6 in -
    Length - Track on Ground - 175 in -
    Ground Contact Area - 9781 in² -
    Ground Contact Area - CD - 12605 in² -
    Track Rollers/Side - 8 -
    Number of Carrier Rollers - 1 per side (optional) -

    Service Refill Capacities
    Final Drive - Each - LGP 2.6 gal (US) - -
    Cooling System 4.2 gal (US) 46.8 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - -
    Transmission - Hydraulic Tank 23.8 gal (US) - -
    Crankcase - With Filter 2.8 gal (US) - -
    Fuel Tank 51.5 gal (US) - 83.2 gal (US)
    Final Drives - Each Side 2.6 gal (US) - -
    Cooling System Refill - Tier 2 Equivalent Engine - 41.7 gal (US) -
    Engine Crankcase - 35.1 gal (US) -
    Power Train - 120 gal (US) -
    Power Train - Refill Volume - 103.3 gal (US) -
    Final Drive - Each - 12.4 gal (US) -
    Roller Frames - Each - 24.8 gal (US) -
    Hydraulic Tank - 42.2 gal (US) -
    Hydraulic System Tank and Chassis - 64.7 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Standard) - 117.6 gal (US) -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - 143.4 gal (US) -
    DEF Tank - - 4.2 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
    Note (1) - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) -

    Dimensions
    BLADE: Blade Capacity (SAE) - LGP 2.17 yd³ - -
    BLADE: Blade Lift Height - LGP 28.7 in - -
    BLADE: Maximum Tilt - LGP 17.2 in - -
    BLADE: Blade Width - LGP 124 in - -
    Ground Clearance - LGP 13 in - -
    BLADE: Blade Width at Maximum Angle - LGP 113.1 in - -
    BLADE: Digging Depth - LGP 23 in - -
    Track Gauge - LGP 67.9 in - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - -
    BLADE: Blade Height - LGP 33.8 in - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 167.8 in - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - -
    Note *Abrasion Undercarriage - -
    BLADE: Maximum Angle (either side) - LGP 25° - -
    Overall Length - With Blade - LGP 167.8 in - -
    BLADE: Blade Width at Maximum Angle - Standard 95.2 in - -
    BLADE: Digging Depth - Standard 23.2 in - -
    BLADE: Blade Width - Standard 104.2 in - -
    BLADE: Blade Lift Height - Standard 28.7 in - -
    Ground Clearance - Standard 13 in - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58° - -
    BLADE: Maximum Angle (either side) - Standard 25° - -
    BLADE: Maximum Tilt - Standard 14.5 in - -
    BLADE: Blade Capacity (SAE) - Standard 1.99 yd³ - -
    Track Gauge - Standard 58.9 in - -
    BLADE: Blade Height - Standard 35.8 in - -
    Overall Length - With Blade - Standard 168 in - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 129.6 in - -
    Width of Dozer (standard shoes, no blade) - Standard 74.8 in - -
    Length of Basic Dozer (without blade) - Standard 129.6 in - -
    Length of Basic Dozer (without blade) - LGP 129.6 in - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 94.9 in - -
    Dozer Height - LGP 108.9 in - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - -
    Dozer Height - LGP, 762 mm (30 in) 108.9 in - -
    Dozer Height - Standard 108.9 in - -

    High Performance Winch
    Weight 1345 lb - -
    Drum diameter 10 in - -
    Winch drive Hydrostatic - -
    Winch length 27.76 in - -
    Maximum line pull – bare drum 40000 lb - -
    Maximum line speed – full drum 207 ft/min - -
    Drum width 10.8 in - -
    Drum capacity – optional 256 ft - -
    Rope diameter – recommended 0.63 in - -
    Maximum line pull – full drum 25000 lb - -
    Rope diameter – optional 0.75 in - -
    Speed Variable - -
    Maximum line speed – bare drum 131 ft/min - -
    Throat clearance 6.75 in - -
    Drum capacity – recommended cable 371 ft - -
    Overall width 29.2 in - -
    Control Hydraulic - -

    Retrieval Winch
    Drum Diameter 8 in - -
    Drum Width 9.65 in - -
    Throat Clearance 5.6 in - -
    Winch Length 35.63 in - -
    Overall width 27.91 in - -
    Weight 1747 lb - -
    Maximum Line Pull - Full Drum 79 ft/min - -
    Drum Capacity - Recommended Cable 277 ft - -
    Maximum Line Pull - Bare Drum 50 ft/min - -
    Drum Capacity - Optional Cable 195 ft - -
    Maximum Line Speed - Full Drum 20350 lb - -
    Control Hydraulic - -
    Maximum Line Speed - Bare Drum 32150 lb - -
    Rope Diameter - Optional 0.75 in - -
    Winch Drive Hydraulic - -
    Rope Diameter - Recommended 0.63 in - -
    Speed Variable - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C32 -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 955 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Blades
    Semi-Universal (SU)* Capacity - 35.6 yd³ -
    Semi-Universal (SU)* Width Over Endbits - 219.8 in -
    U-Blade Capacity - 45 yd³ -
    U-Blade Width - 249.6 in -
    Reclamation Universal - Blade capacity (SAE J1265) - 55 yd³ -
    Reclamation Universal - Width with blade (over end bits) - 251.8 in -
    Carry Dozer - Blade capacity (SAE J1265) - 57 yd³ -
    Carry Dozer - Width with blade (over end bits) - 263.9 in -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C32 -
    Displacement - 1959 in³ -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 957 HP -
    Note (1) - *Excludes all fan losses. -
    Note (2) - Engine ratings apply at 1,800 rpm. -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - 500 gal (US) -
    Fuel Tank - Usable Volume - 475 gal (US) -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 66000 lb -
    Maximum penetration depth (standard tip) - 63.5 in -
    Pryout Force - 148510 lb -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 66110 lb -
    Maximum penetration depth (standard tip) - 85.5 in -
    Pryout Force - 148510 lb -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - 131.1 in -
    Maximum Penetration Force - Shank Vertical - 77350 lb -
    Maximum Penetration - Standard Tip - 43.3 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 145640 lb -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - 149.8 in -
    Length with SU-Blade** - No rear attachment - 345.1 in -
    Overall Length SU-Blade and SS Ripper** - 421.7 in -

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 -
    FOPS - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II -
    Sound (1) - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). -
    Sound (2) - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). -

    Dimensions - D11
    Ground Clearance* - 31.4 in -
    Track Gauge - 114 in -
    Width at Outside of Track (710 mm Track Shoe) - 142 in -
    Height (ROPS/canopy)* - 185.9 in -
    Length of Track on Ground - 175 in -
    Length with SU-Blade** - No rear attachment - 337.8 in -
    Overall Length SU-Blade and SS Ripper** - 414.4 in -
    Note - *Includes grouser height for total dimensions on hard surfaces. -

    VPAT
    Operating Weight - - 37875 lb
    Ground Pressure - - 6.9 psi
    Width of Standard Shoe - - 24 in
    Blade - - VPAT
    Blade Capacity - - 4.6 yd³

    LGP VPAT
    Operating Weight - - 42263 lb
    Ground Pressure - - 4.7 psi
    Width of Standard Shoe - - 33 in
    Blade - - LGP VPAT
    Blade Capacity - - 5.5 yd³

    Fine Grading VPAT
    Operating Weight - - 39198 lb
    Ground Pressure - - 6 psi
    Width of Standard Shoe - - 24 in
    Blade - - VPAT
    Blade Capacity - - 4.6 yd³

    Push Arm
    Operating Weight - - 38228 lb
    Ground Pressure - - 7 psi
    Width of Standard Shoe - - 24 in
    Blade - - Semi-Universal (SU)
    Blade Capacity - - 5.6 yd³

    Sustainability
    Recyclability - - 97%

    Note (1) - - Configurations and features may vary by region. Please consult your Cat dealer for availability in your area.
    Add a Similar Product: