Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
-
-
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
-
-
Weights
Operating Weight
17855 lb
229800 lb
-
Operating Weight - LGP
18839 lb
-
-
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
-
Operating Weight - LGP, 762 mm/30 in
19295 lb
-
-
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
-
Operating Weight - Carrydozer
-
250665 lb
-
Transmission
Drive Pumps
1
-
-
Maximum Travel Speed - Reverse
6.2 mile/h
-
-
Relief Valve Settings
7033 psi
-
-
Maximum Travel Speed - Forward
5.6 mile/h
-
-
Track Motors
2
-
-
1.0 Forward
-
2.5 mile/h
-
2.0 Forward
-
4.4 mile/h
-
3.0 Forward
-
7.6 mile/h
-
1.0 Reverse
-
3 mile/h
-
2.0 Reverse
-
5.3 mile/h
-
3.0 Reverse
-
9.1 mile/h
-
Drawbar Pull - 3 Forward
-
46250 ft·lbf
-
Drawbar Pull - 1 Forward
-
148200 ft·lbf
-
Drawbar Pull - 2 Forward
-
82300 ft·lbf
-
Hydraulic Controls
Pump Output
17.2 gal/min
-
-
Relief Valve Settings
2988 psi
-
-
Pump Type
-
Variable displacement piston pump
-
Combined Pump Output - Implement
-
177 gal/min
-
Ripper
Type
Parallelogram
-
-
Number of Shanks
3
-
-
Height
6.5 in
-
-
Weight
1222 lb
-
-
Maximum Ground Clearance Under Tip
17.6 in
-
-
Maximum Digging Depth
13.3 in
-
-
Overall Width
67.3 in
-
-
Maximum Reach - Ground Line
30.2 in
-
-
Cab
FOPS
ISO 3449:2005 Level II
-
-
ROPS
ISO 3471:2008
-
-
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in)
89 in
-
-
Length - Track on Ground - LGP
89 in
-
-
Track Gauge - LGP
68 in
-
-
Shoe Width - LGP, 762 mm (30 in)
30 in
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
Shoe Width - LGP
25 in
-
-
Track Gauge
59 in
114 in
-
Shoe Width - Standard
16 in
-
-
Ground Pressure - LGP
4.3 psi
-
-
Ground Pressure - LGP, 762 mm (30 in)
3.7 psi
-
-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
-
-
Number of Rollers - Each Side
6
-
-
Length of Track on Ground
89 in
-
-
Number of Shoes - Each Side - Abrasion Undercarriage
38
-
-
Ground Pressure
6.45 psi
-
-
Shoe Type
-
Extreme Service
-
Width - Shoe
-
28 in
-
Width - Shoe - CD
-
36 in
-
Shoes/Side
-
41
-
Grouser Height
-
4 in
-
Pitch
-
12.5 in
-
Ground Clearance*
-
30.6 in
-
Length - Track on Ground
-
175 in
-
Ground Contact Area
-
9781 in²
-
Ground Contact Area - CD
-
12605 in²
-
Track Rollers/Side
-
8
-
Number of Carrier Rollers
-
1 per side (optional)
-
Service Refill Capacities
Final Drive - Each - LGP
2.6 gal (US)
-
-
Cooling System
4.2 gal (US)
46.8 gal (US)
-
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)
-
-
Transmission - Hydraulic Tank
23.8 gal (US)
-
-
Crankcase - With Filter
2.8 gal (US)
-
-
Fuel Tank
51.5 gal (US)
-
-
Final Drives - Each Side
2.6 gal (US)
-
-
Cooling System Refill - Tier 2 Equivalent Engine
-
41.7 gal (US)
-
Engine Crankcase
-
35.1 gal (US)
-
Power Train
-
120 gal (US)
-
Power Train - Refill Volume
-
103.3 gal (US)
-
Final Drive - Each
-
12.4 gal (US)
-
Roller Frames - Each
-
24.8 gal (US)
-
Hydraulic Tank
-
42.2 gal (US)
-
Hydraulic System Tank and Chassis
-
64.7 gal (US)
-
Hydraulic System Chassis + Blade and Ripper (Standard)
-
117.6 gal (US)
-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)
-
143.4 gal (US)
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
-
Note (1)
-
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)
-
Dimensions
BLADE: Blade Capacity (SAE) - LGP
2.17 yd³
-
-
BLADE: Blade Lift Height - LGP
28.7 in
-
-
BLADE: Maximum Tilt - LGP
17.2 in
-
-
BLADE: Blade Width - LGP
124 in
-
-
Ground Clearance - LGP
13 in
-
-
BLADE: Blade Width at Maximum Angle - LGP
113.1 in
-
-
BLADE: Digging Depth - LGP
23 in
-
-
Track Gauge - LGP
67.9 in
-
-
Ground Clearance - LGP, 762 mm (30 in)
13 in
-
-
BLADE: Blade Height - LGP
33.8 in
-
-
Overall Length - With Blade - LGP, 762 mm (30 in)
167.8 in
-
-
Track Gauge - LGP, 762 mm (30 in)
73 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
-
-
Note
*Abrasion Undercarriage
-
-
BLADE: Maximum Angle (either side) - LGP
25°
-
-
Overall Length - With Blade - LGP
167.8 in
-
-
BLADE: Blade Width at Maximum Angle - Standard
95.2 in
-
-
BLADE: Digging Depth - Standard
23.2 in
-
-
BLADE: Blade Width - Standard
104.2 in
-
-
BLADE: Blade Lift Height - Standard
28.7 in
-
-
Ground Clearance - Standard
13 in
-
-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
-
-
BLADE: Maximum Angle (either side) - Standard
25°
-
-
BLADE: Maximum Tilt - Standard
14.5 in
-
-
BLADE: Blade Capacity (SAE) - Standard
1.99 yd³
-
-
Track Gauge - Standard
58.9 in
-
-
BLADE: Blade Height - Standard
35.8 in
-
-
Overall Length - With Blade - Standard
168 in
-
-
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129.6 in
-
-
Width of Dozer (standard shoes, no blade) - Standard
74.8 in
-
-
Length of Basic Dozer (without blade) - Standard
129.6 in
-
-
Length of Basic Dozer (without blade) - LGP
129.6 in
-
-
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
94.9 in
-
-
Dozer Height - LGP
108.9 in
-
-
Width of Dozer (standard shoes, no blade) - LGP
92.9 in
-
-
Dozer Height - LGP, 762 mm (30 in)
108.9 in
-
-
Dozer Height - Standard
108.9 in
-
-
High Performance Winch
Weight
1345 lb
-
-
Drum diameter
10 in
-
-
Winch drive
Hydrostatic
-
-
Winch length
27.76 in
-
-
Maximum line pull – bare drum
40000 lb
-
-
Maximum line speed – full drum
207 ft/min
-
-
Drum width
10.8 in
-
-
Drum capacity – optional
256 ft
-
-
Rope diameter – recommended
0.63 in
-
-
Maximum line pull – full drum
25000 lb
-
-
Rope diameter – optional
0.75 in
-
-
Speed
Variable
-
-
Maximum line speed – bare drum
131 ft/min
-
-
Throat clearance
6.75 in
-
-
Drum capacity – recommended cable
371 ft
-
-
Overall width
29.2 in
-
-
Control
Hydraulic
-
-
Retrieval Winch
Drum Diameter
8 in
-
-
Drum Width
9.65 in
-
-
Throat Clearance
5.6 in
-
-
Winch Length
35.63 in
-
-
Overall width
27.91 in
-
-
Weight
1747 lb
-
-
Maximum Line Pull - Full Drum
79 ft/min
-
-
Drum Capacity - Recommended Cable
277 ft
-
-
Maximum Line Pull - Bare Drum
50 ft/min
-
-
Drum Capacity - Optional Cable
195 ft
-
-
Maximum Line Speed - Full Drum
20350 lb
-
-
Control
Hydraulic
-
-
Maximum Line Speed - Bare Drum
32150 lb
-
-
Rope Diameter - Optional
0.75 in
-
-
Winch Drive
Hydraulic
-
-
Rope Diameter - Recommended
0.63 in
-
-
Speed
Variable
-
-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model
-
Cat® C32
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
-
850 HP
-
Displacement
-
1959 in³
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
-
955 HP
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Reclamation Universal - Width with blade (over end bits)
-
251.8 in
-
Carry Dozer - Blade capacity (SAE J1265)
-
57 yd³
-
Carry Dozer - Width with blade (over end bits)
-
263.9 in
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
-
Cat® C32
-
Displacement
-
1959 in³
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
-
850 HP
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
-
957 HP
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
-
Fuel Tank Capacities
Fuel Tank - Total Volume
-
500 gal (US)
-
Fuel Tank - Usable Volume
-
475 gal (US)
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
-
66000 lb
-
Maximum penetration depth (standard tip)
-
63.5 in
-
Pryout Force
-
148510 lb
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
-
66110 lb
-
Maximum penetration depth (standard tip)
-
85.5 in
-
Pryout Force
-
148510 lb
-
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width
-
131.1 in
-
Maximum Penetration Force - Shank Vertical
-
77350 lb
-
Maximum Penetration - Standard Tip
-
43.3 in
-
Pry-Out Force - Multi-Shank Ripper with One Tooth
-
145640 lb
-
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)
-
149.8 in
-
Length with SU-Blade** - No rear attachment
-
345.1 in
-
Overall Length SU-Blade and SS Ripper**
-
421.7 in
-
Standards
ROPS
-
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
-
FOPS
-
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
-
Sound (1)
-
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
-
Sound (2)
-
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).
-
Dimensions - D11
Ground Clearance*
-
31.4 in
-
Track Gauge
-
114 in
-
Width at Outside of Track (710 mm Track Shoe)
-
142 in
-
Height (ROPS/canopy)*
-
185.9 in
-
Length of Track on Ground
-
175 in
-
Length with SU-Blade** - No rear attachment
-
337.8 in
-
Overall Length SU-Blade and SS Ripper**
-
414.4 in
-
Note
-
*Includes grouser height for total dimensions on hard surfaces.