CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    995 Wheel Loader
    View Product
    980
    View Product Remove
    988 Wheel Loader
    View Product Remove

    Engine
    Engine Model Cat® 3516E Cat C13 Cat® C18 ™
    Emissions U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent - U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II
    Engine Power - ISO 14396 1847 HP - -
    Gross Power - SAE J1995 1870 HP - -
    Net Power - SAE J1349 - Standard Ambient 1739 HP - -
    Net Power - SAE J1349 - High Ambient 1696 HP - -
    Bore 6.7 in - 5.7 in
    Stroke 8.5 in - 7.2 in
    Displacement 4766 in³ 12.5 L 1105 in³
    Peak Torque - 1,200 rpm - SAE J1995 8549 lb/ft - -
    Torque Rise 39% - 58 %
    Note (1) The power ratings apply when tested under the reference conditions for the specified standard. Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. -
    Note (3) The gross power advertised is with the fan at maximum speed. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h -
    Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 - 393 HP -
    Gross Torque @ 1,200 rpm – SAE J1995:2014 - 1627 lb/ft -
    Engine Torque @ 1,200 rpm – ISO 14396:2002 - 1612 lb/ft -
    Gross Power @ 1,700 rpm – SAE J1995:2014 - 425 HP -
    Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 - 1539 lb/ft -
    Engine Power @ 1,700 rpm – ISO 14396:2002 - 429 HP -
    Net Power - SAE J1349:2011 - - 538 HP
    Engine Power - ISO 14396:2002 - - 580 HP
    Gross Power - SAE J1995:2014 - - 588 HP
    Rated Speed - - 1700/min
    Peak Power Speed - - 1500/rpm
    Peak Torque - 1,200 rpm - - 2230 lb/ft

    Operating Specifications
    Operating Weight - Standard 543772 lb - -
    Bucket Capacity Range 17.2-43.6 m3 (22.3-57 yd3) - 4.7-13 m3 (6.2-17 yd3)
    Operating Weight - High Lift 547675 lb - -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) 60 ton (US) - -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) 50 ton (US) - -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) 55 ton (US) - -
    Rated Payload - High Lift (Moderate to High Digging Resistance) 50 ton (US) - -
    Note *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -
    Cat Truck Match - Standard 785/789 - 770～772
    Cat Truck Match - High Lift 789/793/794 - 773～775
    Breakout Force - 51008 lb -
    Note (1) - For a machine configuration as defined under �Weight.� -
    Note (2) - Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. -
    Static Tipping Load - Full 40° Turn - No Tire Deflection - 20965 kg -
    Static Tipping Load - Full 40° Turn - With Tire Deflection - 43432 lb -
    Operating Weight - - 112574 lb
    Rated Payload - Quarry Face - - 12.5 t
    Rated Payload - Loose Material - - 16 t

    Complete System Fill
    Fuel Tank - Standard 856 gal (US) - -
    Fuel Tank - With 24 hr Attachment 1414 gal (US) - -
    Cooling System 138 gal (US) - -
    Engine Crankcase 76 gal (US) - -
    Transmission 110 gal (US) - -
    Differential - Final Drives - Front 220 gal (US) - -
    Differential - Final Drives - Rear 200 gal (US) - -
    Hydraulic Tank - Implement and Hydraulic Fan 270 gal (US) - -
    Hydraulic Tank - Steering and Braking 100 gal (US) - -
    Oil Renewal System (ORS)* 20 gal (US) - -
    Note *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

    Axles
    Front Fixed - Fixed
    Rear Trunnion - Trunnion
    Oscillation Angle 9° - 13 °

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) 131 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) 127.4 °F - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 74 dB(A) - -
    Machine Sound Level (ISO 6395:2008) 119 dB(A) - -
    Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 73 dB(A) - -
    Machine Sound Level (ISO 6395:2008) 117 dB(A) - -
    Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, Load Sensing - Pilot, load sensing
    Steering System - Pump Piston, Variable Displacement - Piston, variable displacement
    Total Steering Angle 80 degrees - 86 °
    Steering Cycle Times - Low Idle 7.6 s - 5.6 s
    Steering Cycle Times - High Idle 4.3 s - 3.4 s
    Maximum Flow - - 71.3 gal/min
    Relief Valve Setting - Steering - - 4351 psi

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift 28.8 ft - -
    Clearance at Maximum Lift 19.8 ft - -
    Dump Angle at Maximum Lift –50.0 degrees - -
    Front Axle Centerline to Bucket Tip 21.9 ft - -
    Ground to Bumper Clearance 4.4 ft - -
    Ground to Center of Axles 6 ft - -
    Ground to Lower Hitch Clearance 2.9 ft - -
    Ground to Top of Exhaust Stacks 23.2 ft - -
    Ground to Top of Hood 18.6 ft - -
    Ground to Top of ROPS 23.4 ft - -
    Maximum Overall Height - Bucket Raised 39.3 ft - -
    Maximum Overall Length 64.6 ft - -
    Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift 59.5 degrees - -
    Rack Back Angle - Carry 47.7 degrees - -
    Rack Back Angle - Ground Level 39.7 degrees - -
    Reach - Maximum Lift 9.6 ft - -
    Rear Axle - Centerline to Bumper 20.4 ft - -
    Tread Width 14.1 ft - -
    Wheel Base 22.3 ft - -
    Width - Over Tires - With Bulge 18.8 ft - -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift 31.6 ft - -
    Clearance at Maximum Lift 22.6 ft - -
    Dump Angle at Maximum Lift –50.0 degrees - -
    Front Axle Centerline to Bucket Tip 24.2 ft - -
    Ground to Bumper Clearance 4.4 ft - -
    Ground to Center of Axles 6 ft - -
    Ground to Lower Hitch Clearance 2.9 ft - -
    Ground to Top of Exhaust Stacks 23.2 ft - -
    Ground to Top of Hood 18.6 ft - -
    Ground to Top of ROPS 23.4 ft - -
    Maximum Overall Height - Bucket Raised 42.1 ft - -
    Maximum Overall Length 66.9 ft - -
    Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift 59.4 degrees - -
    Rack Back Angle - Carry 53.5 degrees - -
    Rack Back Angle - Ground Level 45 degrees - -
    Reach - Maximum Lift 9.4 ft - -
    Rear Axle - Centerline to Bumper 20.4 ft - -
    Tread Width 14.1 ft - -
    Wheel Base 22.3 ft - -
    Width - Over Tires - With Bulge 18.8 ft - -

    Transmission
    Transmission Type Cat Planetary Power Shift - Cat planetary powershift
    Forward - 1 4.6 mile/h 4.3 mile/h 4 mile/h
    Forward - 2 8 mile/h 8.3 mile/h 7.2 mile/h
    Forward - 3 13.6 mile/h 14.6 mile/h 12.7 mile/h
    Reverse - 1 5 mile/h 4.8 mile/h 4.7 mile/h
    Reverse - 2 8.8 mile/h 9.4 mile/h 8.3 mile/h
    Reverse - 3 14.9 mile/h 16.7 mile/h 14.4 mile/h
    Direct Drive - Forward 1 Lock-up disables - Lock-up disabled
    Direct Drive - Forward 2 8.7 mile/h - 7.8 mile/h
    Direct Drive - Forward 3 15.2 mile/h - 13.9 mile/h
    Direct Drive - Reverse 1 Lock-up disables - 5 mile/h
    Direct Drive - Reverse 2 9.6 mile/h - 8.9 mile/h
    Direct Drive - Reverse 3 16.8 mile/h - 15.8 mile/h
    Note Travel speeds based on 58/85-57 tires. Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius. -
    Forward - 4 - 24.5 mile/h 21.6 mile/h
    Reverse - 4 - 24.5 mile/h -
    Direct Drive - Forward 4 - - 24.4 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Positive Flow Control - EH- Positive Flow Control, Flow Sharing
    Lift/Tilt System - Pump Variable Displacement Piston - -
    Maximum Flow at 1,700 rpm Engine Speed 541 gal/min - -
    Relief Valve Setting - Lift/Tilt 5004 psi - 4757 psi
    Cylinders, Double Acting - Lift, Bore and Stroke 370 × 1713 mm (14.6 × 67.4 in) - 210 mm × 1050 mm (8.7 in × 41.3 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke 310 × 1086 mm (12.2 × 42.8 in) - 269 mm × 685 mm (8.7 in × 27 in)
    Pilot System Open Loop and Pressure Reducing - Variable displacement piston
    Lift/Tilt System - - Variable displacement piston
    Maximum Flow at 1,400-1,860 rpm - - 153 gal/min
    Relief Valve Setting - Main - - 551 psi

    Hydraulic Cycle Times
    Rack Back 4.9 s - -
    Raise 12.6 s - -
    Dump 3.1 s - -
    Lower Float Down 4.2 s - -

    Brakes
    Brakes ISO 3450:2011 - ISO 3450:2011

    Weights
    Operating Weight - 66877 lb -
    Note - Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s -

    Bucket Capacities
    Bucket Range - 4.0-14.5 m³ 5.25-19 yd³ -

    Sound
    Note (1) - ** For machines in European Union countries and in countries that adopt the �EU Directives.� -
    Note (2) - ***European Union Directive �2000/14/EC� as amended by �2005/88/EC.� -
    With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level* - 109 -
    With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) - 112 dB(A) -
    With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) - 78 -
    With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Service Refill Capacities
    Cooling System - 13.7 gal (US) 31.7 gal (US)
    Crankcase - 9.8 gal (US) 15.9 gal (US)
    DEF Tank - 5.5 gal (US) -
    Differential - Final Drives - Front - 22.2 gal (US) 49.1 gal (US)
    Differential - Final Drives - Rear - 22.4 gal (US) 49.1 gal (US)
    Fuel Tank - 112.5 gal (US) 188 gal (US)
    Hydraulic Tank - 40.4 gal (US) -
    Transmission - 20.3 gal (US) 31.7 gal (US)
    Coolant (Validated by Test Cell Fill Quantities) - - 33 gal (US)
    Diesel Exhaust Fluid Tank - - 8.7 gal (US)
    Transmission - Validated by Test Cell Fill Quantities - - 29 gal (US)
    Hydraulic System Factory Fill - - 125.5 gal (US)
    Hydraulic System - Tank Only - - 63.4 gal (US)

    Hydraulic System
    Implement System - Maximum Operating Pressure - 4975 psi -
    Implement System - Maximum Pump Output at 2,250 rpm - 119 gal/min -

    Dimensions
    Note - All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. -

    Dimensions - High Lift
    Centerline of Rear Axle to Edge of Counterweight - 8.9 ft -
    Centerline of Rear Axle to Hitch - 6.3 ft -
    Ground Clearance - 1.5 ft -
    Height - Top of Exhaust Pipe - 12.5 ft -
    Height - Top of Hood - 10.1 ft -
    Height - Top of ROPS - 12.7 ft -
    Hinge Pin Height at Carry - 2.2 ft -
    Hinge Pin Height at Maximum Lift - 15.7 ft -
    Lift Arm Clearance at Maximum Lift - 13.6 ft -
    Overall Length - Without Bucket - 27.5 ft -
    Tread Width - 8 ft -
    Wheel Base - 12.6 ft -
    Rack Back at Ground - 40 degrees -
    Width over Tires (Loaded) - 10.9 ft -
    Rack Back - Carry Height - 50 degrees -
    Rack Back - Maximum Lift - 61 degrees -

    Dimensions - Standard Lift
    Centerline of Rear Axle to Hitch - 6.3 ft -
    Ground Clearance - 456 mm -
    Height - Top of Exhaust Pipe - 3764 mm -
    Height - Top of Hood - 3064 mm -
    Height - Top of ROPS - 3829 mm -
    Hinge Pin Height at Carry - 2.2 ft -
    Hinge Pin Height at Maximum Lift - 4554 mm -
    Lift Arm Clearance at Maximum Lift - 3881 mm -
    Overall Length - Without Bucket - 8155 mm -
    Tread Width - 8 ft -
    Wheel Base - 3800 mm -
    Rack Back at Ground - 40 degrees -
    Centerline of Rear Axle to Edge of Counterweight - 2661 mm -
    Width over Tires (Loaded) - 10.9 ft -
    Rack Back - Carry Height - 50 degrees -
    Rack Back - Maximum Lift - 61 degrees -

    Hydraulic Cycle Time (1,400-1,860 rpm)
    Rack Back - - 4.5 s
    Raise - - 8 s
    Dump - - 2.2 s
    Lower Float Down - - 3.5 s
    Total Hydraulic Cycle Time - Empty Bucket - - 18.2 s

    Operator's Cab
    ROPS/FOPS - - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 111 dB(A)

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - - 73 dB(A)
    Machine Sound Power Level (ISO 6395:2008) - - 112 dB(A)

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - - 13.8 ft
    Ground to Top of Exhaust Stacks - - 14.8 ft
    Ground to Top of Hood - - 10.9 ft
    Rear Axle - Centerline to Bumper - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - 14 ft
    Wheel Base - - 14.9 ft
    Maximum Overall Length - - 39.3 ft
    Ground to Lower Hitch Clearance - - 1.9 ft
    Clearance at Maximum Lift - - 11.9 ft
    B-Pin Height - Maximum Lift - - 18 ft
    Maximum Overall Height - Bucket Raised - - 24.5 ft
    Reach - Maximum Lift - - 6.5 ft

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - - 13.8 ft
    Ground to Top of Exhaust Stacks - - 14.8 ft
    Ground to Top of Hood - - 10.9 ft
    Rear Axle - Centerline to Bumper - - 10.5 ft
    Front Axle Centerline to Bucket Tip - - 15.3 ft
    Wheel Base - - 14.9 ft
    Maximum Overall Length - - 40.7 ft
    Ground to Lower Hitch Clearance - - 1.9 ft
    Clearance at Maximum Lift - - 13.3 ft
    B-Pin Height - Maximum Lift - - 19.3 ft
    Maximum Overall Height - Bucket Raised - - 25.8 ft
    Reach - Maximum Lift - - 6.8 ft

    Buckets
    Bucket Capacities - - 4.7-13 m3 (6.2-17 yd3)
    Add a Similar Product: