U.S. EPA Tier 4 Final/EU Stage V or
U.S. EPA Tier 1 equivalent
U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards, Brazil MAR-1 and China Nonroad Stage IV emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA, and U.S. EPA Tier 2 and EU Stage II
-
Engine Power - ISO 14396
1847 HP
-
-
Gross Power - SAE J1995
1870 HP
-
-
Net Power - SAE J1349 - Standard Ambient
1739 HP
-
-
Net Power - SAE J1349 - High Ambient
1696 HP
-
-
Bore
6.7 in
5.7 in
-
Stroke
8.5 in
7.2 in
-
Displacement
4766 in³
1105 in³
-
Peak Torque - 1,200 rpm - SAE J1995
8549 lb/ft
-
-
Torque Rise
39%
58 %
-
Note (1)
The power ratings apply when tested under the reference conditions for the specified standard.
-
-
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
-
-
Note (3)
The gross power advertised is with the fan at maximum speed.
-
-
Net Power - SAE J1349:2011
-
538 HP
-
Engine Power - ISO 14396:2002
-
580 HP
-
Gross Power - SAE J1995:2014
-
588 HP
-
Rated Speed
-
1700/min
-
Peak Power Speed
-
1500/rpm
-
Peak Torque - 1,200 rpm
-
2230 lb/ft
-
Operating Specifications
Operating Weight - Standard
543772 lb
-
-
Bucket Capacity Range
17.2-43.6 m3 (22.3-57 yd3)
4.7-13 m3 (6.2-17 yd3)
-
Operating Weight - High Lift
547675 lb
-
-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
60 ton (US)
-
-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)
50 ton (US)
-
-
Rated Payload - High Lift (Low to Moderate Digging Resistance)
55 ton (US)
-
-
Rated Payload - High Lift (Moderate to High Digging Resistance)
50 ton (US)
-
-
Note
*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
-
-
Cat Truck Match - Standard
785/789
770~772
-
Cat Truck Match - High Lift
789/793/794
773~775
-
Operating Weight
-
112574 lb
-
Rated Payload - Quarry Face
-
12.5 t
-
Rated Payload - Loose Material
-
16 t
-
Complete System Fill
Fuel Tank - Standard
856 gal (US)
-
-
Fuel Tank - With 24 hr Attachment
1414 gal (US)
-
-
Cooling System
138 gal (US)
-
-
Engine Crankcase
76 gal (US)
-
-
Transmission
110 gal (US)
-
-
Differential - Final Drives - Front
220 gal (US)
-
-
Differential - Final Drives - Rear
200 gal (US)
-
-
Hydraulic Tank - Implement and Hydraulic Fan
270 gal (US)
-
-
Hydraulic Tank - Steering and Braking
100 gal (US)
-
-
Oil Renewal System (ORS)*
20 gal (US)
-
-
Note
*Not available on Tier 4 Final/Stage V machines. Not available in all regions.
-
-
Axles
Front
Fixed
Fixed
-
Rear
Trunnion
Trunnion
-
Oscillation Angle
9°
13 °
-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard
109.4 °F
-
-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
131 °F
-
-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
127.4 °F
-
-
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
74 dB(A)
-
-
Machine Sound Level (ISO 6395:2008)
119 dB(A)
-
-
Note
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
-
-
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
73 dB(A)
-
-
Machine Sound Level (ISO 6395:2008)
117 dB(A)
-
-
Note
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c
-
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, Load Sensing
Pilot, load sensing
-
Steering System - Pump
Piston, Variable Displacement
Piston, variable displacement
-
Total Steering Angle
80 degrees
86 °
-
Steering Cycle Times - Low Idle
7.6 s
5.6 s
-
Steering Cycle Times - High Idle
4.3 s
3.4 s
-
Maximum Flow
-
71.3 gal/min
-
Relief Valve Setting - Steering
-
4351 psi
-
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift
28.8 ft
-
-
Clearance at Maximum Lift
19.8 ft
-
-
Dump Angle at Maximum Lift
–50.0 degrees
-
-
Front Axle Centerline to Bucket Tip
21.9 ft
-
-
Ground to Bumper Clearance
4.4 ft
-
-
Ground to Center of Axles
6 ft
-
-
Ground to Lower Hitch Clearance
2.9 ft
-
-
Ground to Top of Exhaust Stacks
23.2 ft
-
-
Ground to Top of Hood
18.6 ft
-
-
Ground to Top of ROPS
23.4 ft
-
-
Maximum Overall Height - Bucket Raised
39.3 ft
-
-
Maximum Overall Length
64.6 ft
-
-
Note
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
-
-
Rack Angle at Maximum Lift
59.5 degrees
-
-
Rack Back Angle - Carry
47.7 degrees
-
-
Rack Back Angle - Ground Level
39.7 degrees
-
-
Reach - Maximum Lift
9.6 ft
-
-
Rear Axle - Centerline to Bumper
20.4 ft
-
-
Tread Width
14.1 ft
-
-
Wheel Base
22.3 ft
-
-
Width - Over Tires - With Bulge
18.8 ft
-
-
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift
31.6 ft
-
-
Clearance at Maximum Lift
22.6 ft
-
-
Dump Angle at Maximum Lift
–50.0 degrees
-
-
Front Axle Centerline to Bucket Tip
24.2 ft
-
-
Ground to Bumper Clearance
4.4 ft
-
-
Ground to Center of Axles
6 ft
-
-
Ground to Lower Hitch Clearance
2.9 ft
-
-
Ground to Top of Exhaust Stacks
23.2 ft
-
-
Ground to Top of Hood
18.6 ft
-
-
Ground to Top of ROPS
23.4 ft
-
-
Maximum Overall Height - Bucket Raised
42.1 ft
-
-
Maximum Overall Length
66.9 ft
-
-
Note
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
-
-
Rack Angle at Maximum Lift
59.4 degrees
-
-
Rack Back Angle - Carry
53.5 degrees
-
-
Rack Back Angle - Ground Level
45 degrees
-
-
Reach - Maximum Lift
9.4 ft
-
-
Rear Axle - Centerline to Bumper
20.4 ft
-
-
Tread Width
14.1 ft
-
-
Wheel Base
22.3 ft
-
-
Width - Over Tires - With Bulge
18.8 ft
-
-
Transmission
Transmission Type
Cat Planetary Power Shift
Cat planetary powershift
-
Forward - 1
4.6 mile/h
4 mile/h
-
Forward - 2
8 mile/h
7.2 mile/h
-
Forward - 3
13.6 mile/h
12.7 mile/h
-
Reverse - 1
5 mile/h
4.7 mile/h
-
Reverse - 2
8.8 mile/h
8.3 mile/h
-
Reverse - 3
14.9 mile/h
14.4 mile/h
-
Direct Drive - Forward 1
Lock-up disables
Lock-up disabled
-
Direct Drive - Forward 2
8.7 mile/h
7.8 mile/h
-
Direct Drive - Forward 3
15.2 mile/h
13.9 mile/h
-
Direct Drive - Reverse 1
Lock-up disables
5 mile/h
-
Direct Drive - Reverse 2
9.6 mile/h
8.9 mile/h
-
Direct Drive - Reverse 3
16.8 mile/h
15.8 mile/h
-
Note
Travel speeds based on 58/85-57 tires.
-
-
Forward - 4
-
21.6 mile/h
-
Direct Drive - Forward 4
-
24.4 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive Flow Control
EH- Positive Flow Control, Flow Sharing
-
Lift/Tilt System - Pump
Variable Displacement Piston
-
-
Maximum Flow at 1,700 rpm Engine Speed
541 gal/min
-
-
Relief Valve Setting - Lift/Tilt
5004 psi
4757 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
370 × 1713 mm (14.6 × 67.4 in)
210 mm × 1050 mm (8.7 in × 41.3 in)
-
Cylinders, Double Acting - Tilt, Bore and Stroke
310 × 1086 mm (12.2 × 42.8 in)
269 mm × 685 mm (8.7 in × 27 in)
-
Pilot System
Open Loop and Pressure Reducing
Variable displacement piston
-
Lift/Tilt System
-
Variable displacement piston
-
Maximum Flow at 1,400-1,860 rpm
-
153 gal/min
-
Relief Valve Setting - Main
-
551 psi
-
Hydraulic Cycle Times
Rack Back
4.9 s
-
-
Raise
12.6 s
-
-
Dump
3.1 s
-
-
Lower Float Down
4.2 s
-
-
Brakes
Brakes
ISO 3450:2011
ISO 3450:2011
-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back
-
4.5 s
-
Raise
-
8 s
-
Dump
-
2.2 s
-
Lower Float Down
-
3.5 s
-
Total Hydraulic Cycle Time - Empty Bucket
-
18.2 s
-
Air Conditioning System
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Operator's Cab
ROPS/FOPS
-
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards
-
Service Refill Capacities
Fuel Tank
-
188 gal (US)
-
Cooling System
-
31.7 gal (US)
-
Coolant (Validated by Test Cell Fill Quantities)
-
33 gal (US)
-
Crankcase
-
15.9 gal (US)
-
Diesel Exhaust Fluid Tank
-
8.7 gal (US)
-
Transmission
-
31.7 gal (US)
-
Transmission - Validated by Test Cell Fill Quantities
-
29 gal (US)
-
Differential - Final Drives - Front
-
49.1 gal (US)
-
Differential - Final Drives - Rear
-
49.1 gal (US)
-
Hydraulic System Factory Fill
-
125.5 gal (US)
-
Hydraulic System - Tank Only
-
63.4 gal (US)
-
Sound Performance - Tier 4 Final / Stage V - Standard