Compare Equipment Go Back

995 Wheel Loader

Engine

Engine Model Cat® 3516E - -
Emissions U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent - -
Engine Power - ISO 14396 1847 HP - -
Gross Power - SAE J1995 1870 HP - -
Net Power - SAE J1349 - Standard Ambient 1739 HP - -
Net Power - SAE J1349 - High Ambient 1696 HP - -
Bore 6.7 in - -
Stroke 8.5 in - -
Displacement 4766 in³ - -
Peak Torque - 1,200 rpm - SAE J1995 8549 lb/ft - -
Torque Rise 39% - -
Note (1) The power ratings apply when tested under the reference conditions for the specified standard. - -
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. - -
Note (3) The gross power advertised is with the fan at maximum speed. - -

Operating Specifications

Operating Weight - Standard 543772 lb - -
Bucket Capacity Range 17.2-43.6 m3 (22.3-57 yd3) - -
Operating Weight - High Lift 547675 lb - -
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) 60 ton (US) - -
Rated Payload - Standard Lift (Moderate to High Digging Resistance) 50 ton (US) - -
Rated Payload - High Lift (Low to Moderate Digging Resistance) 55 ton (US) - -
Rated Payload - High Lift (Moderate to High Digging Resistance) 50 ton (US) - -
Note *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -
Cat Truck Match - Standard 785/789 - -
Cat Truck Match - High Lift 789/793/794 - -

Complete System Fill

Fuel Tank - Standard 856 gal (US) - -
Fuel Tank - With 24 hr Attachment 1414 gal (US) - -
Cooling System 138 gal (US) - -
Engine Crankcase 76 gal (US) - -
Transmission 110 gal (US) - -
Differential - Final Drives - Front 220 gal (US) - -
Differential - Final Drives - Rear 200 gal (US) - -
Hydraulic Tank - Implement and Hydraulic Fan 270 gal (US) - -
Hydraulic Tank - Steering and Braking 100 gal (US) - -
Oil Renewal System (ORS)* 20 gal (US) - -
Note *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

Axles

Front Fixed - -
Rear Trunnion - -
Oscillation Angle - -

Cooling System

Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - -
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) 131 °F - -
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) 127.4 °F - -

Sound Performance - Standard

Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 74 dB(A) - -
Machine Sound Level (ISO 6395:2008) 119 dB(A) - -
Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

Sound Performance - Suppression

Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 73 dB(A) - -
Machine Sound Level (ISO 6395:2008) 117 dB(A) - -
Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

Hydraulic System - Steering

Steering System - Circuit Pilot, Load Sensing - -
Steering System - Pump Piston, Variable Displacement - -
Total Steering Angle 80 degrees - -
Steering Cycle Times - Low Idle 7.6 s - -
Steering Cycle Times - High Idle 4.3 s - -

Dimensions - Standard Lift - Approximate

B-Pin Height - Maximum Lift 28.8 ft - -
Clearance at Maximum Lift 19.8 ft - -
Dump Angle at Maximum Lift –50.0 degrees - -
Front Axle Centerline to Bucket Tip 21.9 ft - -
Ground to Bumper Clearance 4.4 ft - -
Ground to Center of Axles 6 ft - -
Ground to Lower Hitch Clearance 2.9 ft - -
Ground to Top of Exhaust Stacks 23.2 ft - -
Ground to Top of Hood 18.6 ft - -
Ground to Top of ROPS 23.4 ft - -
Maximum Overall Height - Bucket Raised 39.3 ft - -
Maximum Overall Length 64.6 ft - -
Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
Rack Angle at Maximum Lift 59.5 degrees - -
Rack Back Angle - Carry 47.7 degrees - -
Rack Back Angle - Ground Level 39.7 degrees - -
Reach - Maximum Lift 9.6 ft - -
Rear Axle - Centerline to Bumper 20.4 ft - -
Tread Width 14.1 ft - -
Wheel Base 22.3 ft - -
Width - Over Tires - With Bulge 18.8 ft - -

Dimensions - High Lift - Approximate

B-Pin Height - Maximum Lift 31.6 ft - -
Clearance at Maximum Lift 22.6 ft - -
Dump Angle at Maximum Lift –50.0 degrees - -
Front Axle Centerline to Bucket Tip 24.2 ft - -
Ground to Bumper Clearance 4.4 ft - -
Ground to Center of Axles 6 ft - -
Ground to Lower Hitch Clearance 2.9 ft - -
Ground to Top of Exhaust Stacks 23.2 ft - -
Ground to Top of Hood 18.6 ft - -
Ground to Top of ROPS 23.4 ft - -
Maximum Overall Height - Bucket Raised 42.1 ft - -
Maximum Overall Length 66.9 ft - -
Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
Rack Angle at Maximum Lift 59.4 degrees - -
Rack Back Angle - Carry 53.5 degrees - -
Rack Back Angle - Ground Level 45 degrees - -
Reach - Maximum Lift 9.4 ft - -
Rear Axle - Centerline to Bumper 20.4 ft - -
Tread Width 14.1 ft - -
Wheel Base 22.3 ft - -
Width - Over Tires - With Bulge 18.8 ft - -

Transmission

Transmission Type Cat Planetary Power Shift - -
Forward - 1 4.6 mile/h - -
Forward - 2 8 mile/h - -
Forward - 3 13.6 mile/h - -
Reverse - 1 5 mile/h - -
Reverse - 2 8.8 mile/h - -
Reverse - 3 14.9 mile/h - -
Direct Drive - Forward 1 Lock-up disables - -
Direct Drive - Forward 2 8.7 mile/h - -
Direct Drive - Forward 3 15.2 mile/h - -
Direct Drive - Reverse 1 Lock-up disables - -
Direct Drive - Reverse 2 9.6 mile/h - -
Direct Drive - Reverse 3 16.8 mile/h - -
Note Travel speeds based on 58/85-57 tires. - -

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit Positive Flow Control - -
Lift/Tilt System - Pump Variable Displacement Piston - -
Maximum Flow at 1,700 rpm Engine Speed 541 gal/min - -
Relief Valve Setting - Lift/Tilt 5004 psi - -
Cylinders, Double Acting - Lift, Bore and Stroke 370 × 1713 mm (14.6 × 67.4 in) - -
Cylinders, Double Acting - Tilt, Bore and Stroke 310 × 1086 mm (12.2 × 42.8 in) - -
Pilot System Open Loop and Pressure Reducing - -

Hydraulic Cycle Times

Rack Back 4.9 s - -
Raise 12.6 s - -
Dump 3.1 s - -
Lower Float Down 4.2 s - -

Brakes

Brakes ISO 3450:2011 - -
Add a Similar Product: