CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    735 Articulated Truck
    View Product
    730 Articulated Truck
    View Product Remove
    740 GC Articulated Truck
    View Product Remove

    Engine
    Engine Model Cat® C13 Cat® C13 Cat® C15
    Bore 5.1 in 5.1 in 5.4 in
    Stroke 6.2 in 6.2 in 6.75 in
    Displacement 736 in³ 762.8 in³ 926 in³
    Peak Engine Torque Net (SAE J1349) 1597 ft·lbf 1564 ft·lbf 1670 ft·lbf
    Peak Engine Torque Speed 1200 r/min 1200 r/min 1200 r/min
    Emissions The 735 meets Tier 4 Final and Stage V emission standards. - -
    Peak Engine Torque Gross (SAE J1995) 1614 ft·lbf 1579 ft·lbf 1711 ft·lbf
    Note (3) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
    No Engine De-rating Below 12500 ft 12500 ft 10000 ft
    Note (2) The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. Advertised power is tested per the specified standard in effect at the time of manufacture. The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
    Net Power - ISO 14396 429 hp 370 hp 447 hp
    Gross Power - SAE J1995:2014 434 hp 375 hp 452 hp
    Note (5) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
    Note (4) Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions.
    Note (1) The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. Advertised power is tested at 1,800 rpm. The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
    Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C13 - -
    Net Power - SAE J1349:2011 424 hp 367 hp 439 hp

    Weights
    Rated Payload 35.3 ton (US) 31 ton (US) 40 ton (US)

    Body Capacities
    Heaped (SAE 2:1) 26.2 yd³ 23 yd³ 29.7 yd³
    Struck 20.3 yd³ 17.4 yd³ 23.2 yd³
    Tailgate Heaped SAE 2:1 27.9 yd³ 24.6 yd³ 32 yd³
    Tailgate Struck 21.3 yd³ 18.2 yd³ 24.4 yd³

    Transmission
    Forward - 1 5 mile/h 5 mile/h 4 mile/h
    Forward - 2 9 mile/h 9 mile/h 5.3 mile/h
    Forward - 3 14 mile/h 14 mile/h 7.3 mile/h
    Forward - 4 22 mile/h 21 mile/h 9.2 mile/h
    Forward - 5 30 mile/h 29 mile/h 12.2 mile/h
    Forward - 6 35 mile/h 34 mile/h 14.9 mile/h
    Reverse - 1 6 mile/h 6 mile/h 4.2 mile/h
    Forward - 7 - - 20.6 mile/h
    Forward - 8 - - 24.7 mile/h
    Forward - 9 - - 35.7 mile/h
    Reverse - 2 - - 9.8 mile/h

    Service Refill Capacities
    Fuel Tank 108.8 gal (US) 108.8 gal (US) 145.3 gal (US)
    Cooling System 21.9 gal (US) 21.9 gal (US) 23.7 gal (US)
    Hydraulic System 29.1 gal (US) 29.1 gal (US) -
    Engine Crankcase 10 gal (US) 10 gal (US) 13.7 gal (US)
    Transmission 12.3 gal (US) 12.4 gal (US) -
    Final Drives/Differential 33 gal (US) 33 gal (US) -
    Output Transfer Gear Box 5.5 gal (US) 6.3 gal (US) -
    DEF Tank 5.3 gal (US) 5.3 gal (US) 6.5 gal (US)
    Brake Cooling Tank - - 17.7 gal (US)
    Steering/Hoist Hydraulic System - - 36.9 gal (US)
    Transmission - OTG - - 19.8 gal (US)
    Final Drive - Each - - 1.3 gal (US)
    Axles - Each - - 15.8 gal (US)

    Sound Levels
    Interior Cab 72 dB(A) 72 dB(A) 72 dB(A)
    Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or with doors/windows open for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
    Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fan’s speed. The sound level may vary at different cooling fan The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the

    Body Hoist
    Raise Time 12 s 12 s 12 s
    Lower Time 11 s 8 s 12 s

    Standards
    Brakes ISO 3450 – 2011 ISO 3450 – 2011 ISO 3450 – 2011
    Cab - FOPS ISO 3449 Level II – 2005 ISO 3449 Level II – 2005 ISO 3449 Level II – 2005
    Cab - ROPS ISO 3471 – 2008 ISO 3471 – 2008 ISO 3471 – 2008
    Steering ISO 5010 – 2007 ISO 5010 – 2007 ISO 5010 – 2007

    Operating Weights
    Total - Loaded 126192 lb 114420 lb 152593 lb
    Front Axle - Empty 34128 lb 33069 lb 43200 lb
    Total - Rated Load 70548 lb 61729 lb 80027 lb
    Rear Axle - Loaded 41270 lb 36817 lb 51074 lb
    Rear Axle - Empty 10516 lb 9568 lb 14562 lb
    Center Axle - Empty 11001 lb 10053 lb 14804 lb
    Center Axle - Rated Load 30754 lb 27249 lb 36513 lb
    Front Axle - Loaded 43166 lb 40300 lb 50201 lb
    Total - Empty 55645 lb 52690 lb 72565 lb
    Front Axle - Rated Load 9039 lb 7231 lb 7002 lb
    Rear Axle - Rated Load 30754 lb 27249 lb 36513 lb
    Center Axle - Loaded 41756 lb 37302 lb 51317 lb

    Steering
    Lock to Lock 4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm

    Body Plate
    Type High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel

    Turning Circle
    Turning Dimensions - SAE Turning Radius 294 in 294 in 303 in
    Turning Dimensions - Inside Radius 149 in 153 in 156 in
    Turning Dimensions - Clearance Radius 318 in 318 in 330 in
    Note Dimensions are for machines equipped with 750/65 R25 tires. Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 29.5 R25 tires.
    Turning Dimensions - Steer Angle - Left/Right 45° 45° 45°
    Turning Dimensions - Aisle Width 212 in 210 in 220 in

    Optimal Loader/Truck Pass Matching
    Hydraulic Excavators: 336F/336F XE - Passes 5–6 5–6 -
    Note An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased pr An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374 and 352 Hydraulic Excavators; and Cat 972, 966, and 962 Wheel Loaders. Having matched loading and hauling tools results in increased product
    Hydraulic Excavators: 349F/349F XE - Passes 4–5 4–5 -
    Wheel Loaders: 972M/972M XE - Passes 3–4 3–4 -
    Wheel Loader: 962M - Passes 4–5 4–5 5
    Wheel Loader: 950M - Passes 5 5 -
    Wheel Loaders: 966M/966M XE - Passes 4 4 -
    Hydraulic Excavator: 374 - Passes - - 3-4
    Hydraulic Excavator: 352F - Passes - - 5–6
    Wheel Loader: 972 - Passes - - 3
    Wheel Loader: 966M - Passes - - 4–5

    Body Plate Thickness
    Base Plate 0.51 in 0.51 in 0.51 in
    Front Plate 0.28 in 0.28 in 0.28 in
    Side Plates 0.43 in 0.43 in 0.43 in
    Add a Similar Product:
    • 745 Articulated Truck Add
    • 740 EJ Articulated Truck Add
    • 730 EJ Articulated Truck Add
    • 725 Articulated Truck Add
    • 745 Bare Chassis Articulated Truck Add
    • 730 Bare Chassis Articulated Truck Add
    • 735 Bare Chassis Articulated Truck Add
    • 740 GC Bare Chassis Articulated Truck Add
    • 725 Bare Chassis Articulated Truck Add