Compare Equipment Go Back
 Cat G3512H Combined Heat and Power (CHP) Solution |
 Cat Switchgear |
 Cat XLM Switchgear |
 Cat EGP Switchgear |
|
Generator Set Specifications |
||||
|---|---|---|---|---|
| Continuous Rating | 1490 ekW @ 1.0pf | - | - | - |
| Fuel Type | Natural Gas | - | - | - |
| Maximum Electrical Efficiency | 42.50% | - | - | - |
| Frequency | 60 Hz | - | - | - |
| RPM | 1500 rpm | - | - | - |
Engine Specifications |
||||
| Engine Model | G3512H | - | - | - |
| Displacement | 3574 in³ | - | - | - |
| Aspiration | TA | - | - | - |
| Bore | 6.7 in | - | - | - |
| Stroke | 8.5 in | - | - | - |
| Fuel System | Electronic Fuel Control Valve | - | - | - |
| Governor Type | ADEM™ A4 | - | - | - |
| Compression Ratio | 11.1 | - | - | - |
Generator Set Dimensions |
||||
| Length | 716 in | - | - | - |
| Width | 155 in | - | - | - |
| Height | 467 in | - | - | - |
| Dry Weight - Genset | 34700 lb | - | - | - |
| Weight | 161600 lb | - | - | - |
Enclosure Rating |
||||
| Configuration | - | IP4X | - | - |
Operating Temperature |
||||
| Operating Temperature | - | 35 °C / 40 °C @ 1 hr, option for 0…50 °C (32…122 °F) | - | - |
Dimensions |
||||
| Standard Widths | - | 600 mm for ABB Emax2 E2 1600 - 2500A. 750 mm for ABB Emax2 E4 3200 - 4000A. 1200 mm for ABB Emax2 E6 4000 - 6300A. | - | - |
| Standard Heights | - | Heights include 100mm plinth with fork lift pockets, 1900 mm up to 3200A, 2200 mm for 400,2200 mm for PLC and control cabinets. Option for single point lifting on 4 corners with M10 swivel eyes. Standard sizes for shipping | - | - |
| Standard Depths | - | 300, 450 & 750mm for controls and PLC cabinets. 900mm for fixed breakers. 1050mm for withdrawable breakers | - | - |
Technical Summary |
||||
| Technical Summary | - | Modular system enables any configuration Distribution Boards, Motor Control Centers & PLC Control cabinets. Accommodates fixed or withdrawable breakers. | - | - |
| Configuration | - | - | Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie, utility and load breakers for utility paralleling applications | Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications |
| Modes of Operation | - | - | Emergency Standby, Utility Import/Export, Peak shaving, and base load operations with redundant controls and components. Closed transition to/from generator power | Multi-unit Island and multi-unit standby mode with optional redundant controls and components. |
| Application | - | - | LV and MV ( 208V - 38 kV | LV and MV (208V - 38 kV) |
Application |
||||
| Application | - | LV 380…480 VAC, 50 Hz, 3-Phase. | - | - |
Modes of Operation |
||||
| Modes of Operation | - | Switchgear integration options for multi generator and utility synchronising, load sharing, Peak Lopping/Shaving, AMF, Changeover, Load bank connection, Protection relay etc. | - | - |
Generator Protective Devices |
||||
| ANSI Protective Devices | - | - | 15/25, 27/59, 81 O/U, 32, 40, 50, 51 | 15/25, 27/59, 81 O/U, 32, 40, 50, 51 |
Utility Protective Devices |
||||
| ANSI Protective Devices | - | - | 15/25, 27/59, 81 O/U, 32, 40, 47, 50, 51, 86 | - |
Environmental Parameters |
||||
| Certifications | - | - | IBS, CBC, UBC & OSHPD Certified | IBC, CBC, UBC & OSHPD Certified |
| Control Panel Enclosure | - | - | NEMA 1 or NEMA 3R, Freestanding Construction | NEMA 1 or NEMA 3R Freestanding Construction |
| Operating Temperature | - | - | 0 degrees to 50 degrees C | 0°C to 50°C |
| Storage Temperature | - | - | -20 degrees C to +60 degrees C | -20°C to +60°C |
| Low Voltage Standards | - | - | NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 | NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 |
| Medium Voltage Standards | - | - | NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 | NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 |
Add a Similar Product:
-
Cat Customizable Switchgear and Controls Add
-
EMCP 4.4 Master Control Panel Add
-
Cat® BDP1000 Bi-Directional Power Inverter Add
-
Engine Paralleling and Integration Control (EPIC) Add
-
Energy Capacity Expansion (ECE) module Add
-
Temporary Connection Boxes Add
-
Energy Time Shift (ETS) Module Add
-
XQ570 Tier 4 Final – 455 ekW (568 kVA) Add
-
XQP550 EU Stage V Add
-
XQ125 Rental Power Add